1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Keyboard Tray for Camera Producon Cart (VCTR-KBT)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Heavy-Duty Telescopic Mast w 5/8" Baby Pin
2
Keyboard Tray Setup
• Loosen the rubber stoppers of the camera
cart (not included) using an Allen key.
• Similarly, loosen all rubber stoppers of the
camera cart (Not Included) as shown in the
image.
• Now, Keyboard Tray for camera producon
cart is ready to use.
• The tray with raised lip around the edges and
a mat that prevents items from slipping o
can securely be mounted on any cart shelf
with 4mm maximum edge width.
NOTE: Keyboard tray is compable with Proaim
Victor cart, Victor V1.1, Bowado & Bowado Pro
carts.
3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM KEYBOARD TRAY FOR CAMERA PRODUCTION CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
-
1
-
2
-
3
