KVH Industries TracPhone V7 Quick start guide

KVH Industries
Brand
KVH Industries
Model
TracPhone V7
Category
Routers
Type
Quick start guide

This manual is also suitable for

UCH-250 Fax Server
Connecting the UCH-250
Connect the UCH-250 to your fax machine,
TracPhone V7, and vessel AC power:
Using a standard phone cable, connect 1.
your fax machine to the RJ11 port on
the UCH-250.
Using a straight-through Ethernet 2.
cable, connect the UCH-250 to the
router/switch (not the MTA) that is
connected to the TracPhone V7.
Connect the supplied power supply to 3.
the power jack on the UCH-250 then
plug it into 110V or 220V AC power.
The UCH-250 fax server is a fully managed store-and-forward system that
provides the most reliable faxing over the mini-VSAT Broadband
sm
service.
Simply hook it up between your G3 fax machine and TracPhone
®
V7!
Quick Start Guide
Status LEDs
LED Description
Mode 1, 2, 3 Not used
Network Connected to V7 LAN
Modem Fax machine ready
Pending Fax in progress
Wait Do not disconnect
Error Incoming fax failed
Power Input power OK
1 2
3
1
2
3
Fax Machine
Onboard Vessel
UCH-250
Fax
Document
To : Office
From: Ship
ANALOG
Stored
Receipt
Acknowledged
Transmitted
TracPhone V7
Sent
1
2
3
5
Converted
to Digital
4
mini-VSAT Broadband
Service Satellite
Internet
Business
Management
Server
On-Go
Call Logic
Gateway
Te lephone Network
(PSTN)
Destination Fax
Machine on Shore
Delivered
8
Converted
to Analog
6
Routed
7
A D
D A
On-Go
Fax
Document
To : Office
From: Ship
ANALOG
Fax
Document
To : Office
From: Ship
DIGITAL
Fax
Document
To : Office
From: Ship
ANALOG
How the System Works
©2008 KVH Industries, Inc., All rights reserved. KVH and TracPhone are registered trademarks of KVH Industries, Inc. (54-0566 Rev. A)
For More Information
Visit www.on-go.com for UCH-250 manuals and product support.
Activation (Supplement to mini-VSAT Broadband Service)
Continental U.S.: Call +1 866 399-8509
North/South America, Australia: Call +1 401 847-3327
Europe, Middle East, Asia: Call +45 45 160 180
Operation
From the Vessel: Fax normally to the destination fax number (include
country code and area code, but not the international prefix like 011).
Note: The transmission report indicates the UCH-250 has received the fax; a separate
On-Go report will indicate final delivery.
To the Vessel: Fax to the vessel’s fax server number.
  • Page 1 1
  • Page 2 2

KVH Industries TracPhone V7 Quick start guide

KVH Industries
Brand
KVH Industries
Model
TracPhone V7
Category
Routers
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents