Angelo Decor AD93319 Operating instructions

Thank you for buying an Angelo Decor Fountain!

We ho

ou will find these instructions hel

ful in settin

our fountain. If

ou need mor

information to

erl

care for

our fountain,

lease DO NOT return the unit to

lace of

urchase.

Please visit our web site, www.an

elodecor.com, for assistance and warrant

information.

First un

ack carton carefull

, arran

arts safel

our workin

area

Connect the pre installed light cord

to the transformer.

Connect the tubing to the

pump as shown.

Place the pump inside the fountain, allow th

light connection to hang out the back as shown.

The final assembly should look as follow

Now sim

fill with clean water and

into a

rounded GFCI outle

We recommend kee

bowl 3/4 full of water to avoid

burnout.

Your fountain will work better, and last longer, when kept clean using a soft cloth and mild soap on a regular basis.

This item should be stored properly for harsh winters, as water left to freeze in the bowl may cause cracking, which

is not covered by warranty. May we suggest you disassemble the unit for the winter months,

removing pump and all water, and store in the garage or shed for best results.