Angelo Decor AD91213 Operating instructions

Hello! I have reviewed the Angelo Decor fountain setup manual. This document includes step-by-step instructions on how to assemble your fountain, including tubing connections, water flow adjustments, and recommendations for water filling. I'm ready to answer any questions you may have about setting up and maintaining your fountain.
What should I do if I need more information or have a warranty issue?

How much water should I fill the bowl with?

What precaution should I take when connecting the device?

Thank you for buying an Angelo Decor Fountain!

We hope you will find these instructions helpful in setting up your fountain. If you need more

information to properly care for your fountain, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Pump cord through standpipe Run cord down pedestal and align cord with Connect the bowl

groove at base. to the base

Connect tubing with Adjust pump to the Connect tubing to the pump Adjust the restrictor to desired

T joint desired setting water flow

The final assembly should

look like this

Twist and lock top to the

bowl

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.