Angelo Decor AD91162 Operating instructions

Brand: Angelo Decor

Model: AD91162

Type: Operating instructions

hank you for buyin

an An

elo Decor Fountain!

We ho

ou will find these instructions hel

ful in settin

our fountain. If

ou need mor

information to

erl

care for

our fountain,

lease DO NOT return the unit to

lace of

urchase.

Please visit our web site, www.an

elodecor.com, for assistance and warrant

information.

First un

ack carton carefull

, arran

arts safel

our workin

area

cord through standpipe cord goes through bowl and pedestal, and bowl locks into place

grooved notch

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend kee

bowl 3/4 full of water to avoid

burnout

Please remember

our fountain will work better, and last lon

er,

when ke

t clean usin

a soft cloth, and mild soa

when necessar

, on a re

ular basis.

We also remind

ou that this item should be stored

erl

for harsh winters,

as water left to freeze in the bowl ma

cause crackin

, and is not covered b

warrant

we su

est

ou disassemble the unit for the winter months,

removin

and all water, and store in the

ara

e or shed for best results.

Set pump in housing

with enough cord to

ensure it will sit

properly at bottom.

set pump stength to

approximately 1/2.

(you can adjust to

your taste later).

Attach tubing of top

unit to pump.

Carefully sit the top

unit on the bowl, and

twist and lock into

place. Be sure the

hose does not kink so

the water flow will be

smooth.

Add the included

splash guard if you

are concerned about

water loss. While it

will not completely

eliminate the splash, it

will help keep it to a

minimum!

Angelo Decor AD91162 Operating instructions

Angelo Decor AD91162 Operating instructions

Angelo Decor AD91162 Operating instructions

Related papers

Other documents