2. Computers & electronics
  3. Computer cables
  4. Cable clamps
  5. American Standard
  6. Colony Round Countertop Sink 3003.605

American Standard Colony Round Countertop Sink 3003.605 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Colony Round Countertop Sink 3003.605 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J59
© 2008 AS America Inc.
COLONY ROUND™
COUNTERTOP SINK
ENAMELED STEEL
COLONY ROUND™ COUNTERTOP SINK
• Acid-resisting enamel steel
• Front overow
• Self-rimming with cutout template supplied
• Two soap depressions
• Mounting clamps supplied
❏ 3003.605 Faucet holes on 4" (102mm) centers
Nominal Dimensions:
483mm (19") Round
Bowl sizes:
381mm (15") wide
279mm (11") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Enameled Steel
Plumbing Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.4.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Revised 2/08
*330mm
(13)
184mm
(7-1/4)
6mm
(1/4)
203mm
(8)
178mm
(7)
*254mm
(10)
787mm
(31) TO
FINISHED
FLOOR
SUPPLIES AS REQ'D
1-1/4 O.D. WASTE
1-1/4 O.D. TAILPIECE
COUNTERTOP
(BY OTHERS)
483mm
(19 DIA.)
(3) 32mm(1-1/4)
DIA. HOLES
(4) RETAINERS FOR
MOUNTING LUGS
FINISHED WALL
OR SPLASHBACK
OPTIONAL
92mm
(3-5/8)
229mm
(9)
102mm
(4)
SOAP DEPRESSIONS
FINISHED
FLOOR
CLAMPING DETAIL
LUG AND
SCREW
ASSEMBLY
COUNTERTOP
21mm
(13/16)
MAX.
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
/