G23
© 2008 AS America Inc.
Revised 2/08
SILHOUETTE™ 33" DUAL LEVEL KITCHEN SINK
• Americast
®
brand engineered material
• Dual level double bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain nish
• Top mount or undercounter installation
• Silicone sealant supplied
• Available in 1, 3, 4, or 5 faucet hole
conguration
• Customized hole punchings available
(see page G56)
Top Mount/Undercounter:
❏ 7179.001 Center hole only
❏ 7179.803 3 hole
❏ 7179.804 4 hole
❏ 7179.805 5 hole
Undercounter Installation Order:
❏ 791326-100 Mounting Kit (consists of
cut-out templates and mounting clips)
Nominal Dimensions:
838 x 559 x 241mm
(33" x 22" x 9-1/2")
Bowl sizes:
Right Hand: 191mm (7-1/2") wide
413mm (16-1/4") front to back
178mm (7") deep
Left Hand: 527mm (20-3/4") wide
476mm (18-3/4") front to back
229mm (9") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SILHOUETTE™ 33"
DUAL LEVEL SINK
AMERICAST
®
Top Mount Installation
(faucet not included)
Undercounter Mount Installation
(faucet not included)
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
* See faucet section for available models
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, (specify color):
❏ Traps:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Web Cover: 8106.100, Color:
❏ Bottom Sink Rack (Left): 7407.100, Color:
G24
© 2008 AS America Inc.
7179.803/804/805 Top Mount
Undercounter Mount
NOTES:
*
TEMPLATE PROVIDED WITH MOUNTING KIT 791326-100 FOR
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED
AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
NOTES:
*
TOP MOUNT: COUNTERTOP CUTOUT 806 x 527mm WITH 25mm
RADIUS (31-3/4 X 20-3/4 WITH 1" RAD.) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
3-1/2"
(89mm)
DIA.
2-1/8"
(54mm)
2" (51mm)
OPTIONAL
FINISHED WALL
OR SPLASHBACK
7-7/8"
(200mm)
8-1/8"
(206mm)
1-1/2" (38mm)
DIA. HOLES TYP.
C/L
5/8" (16mm)
9-3/4"
(248mm)
11-1/8"
(282mm)
16-1/2"
(419mm)
33"
(838mm)
9-1/8"
(232mm)
SEALING
COMPOUND
FINISHED FLOOR
COUNTERTOP
(BY OTHERS)
22"
(559mm)
*CUTOUT NOTE
7179.804
4 HOLE
1-1/2" (38mm)
RAD. TYP.
1-1/2" O.D. TAILPIECE
6"
(152mm)
1/2"
(13mm)
7179.805
5 HOLE
4" (102mm)
4" (102mm)
4" (102mm)
4" (102mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
5-3/4"
(146mm)
FINISHED WALL
OR SPLASHBACK
C/L
SEALING
COMPOUND
FINISHED FLOOR
COUNTERTOP
(BY OTHERS)
*
CUTOUT
NOTE
7179.804
4 HOLE
1-1/2" O.D. TAILPIECE
6-1/2"
(165mm)
7179.805
5 HOLE
MOUNTING CLIP
(SEE DETAIL)
DETAIL OF MOUNTING CL IP
(KIT No.791004-100)
BRASS
INSERT
1/2
"
(13mm)
MIN.
REFER TO IN ST RUCTIONS
PROVIDED WI TH KIT FOR
ADDITIONAL IN FORMATION
CLIP
MACH.
SCREW
SINK
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
9-3/4"
(248mm)
11-1/8"
(282mm)
16-1/2"
(419mm)
33"
(838mm)
22"
(559mm)
5-3/4"
(146mm)
9-1/2"
(241mm)
3-1/2"
(89mm)
DIA.
1-1/2" (38mm)
RAD. TYP.
2-1/8"
(54mm)
2" (51mm)
OPTIONAL
7-7/8"
(200mm)
8-1/8"
(206mm)
1-1/2" (38mm)
DIA. HOLES TYP.
5/8" (16mm)
4" (102mm)
4" (102mm)
4" (102mm)
4" (102mm)
SILHOUETTE™ 33"
DUAL LEVEL SINK
AMERICAST
®
Revised 2/08
-
1
-
2
American Standard Silhouette 7179.804 User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard 7196.813 User manual
-
-
-
-
-
American Standard 38 User manual
-
-
American Standard Lakeland 31" Large Single Bowl Sink 791123-100 User manual
-
-