2. American Standard
  3. Acclivity Countertop Sink 3409.001

American Standard Acclivity Countertop Sink 3409.001, Acclivity 3409.403, Acclivity 3409.803, Acclivity Countertop Sink 3409.403, Acclivity Countertop Sink 3409.803 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Acclivity Countertop Sink 3409.001 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J57
© 2008 AS America Inc.
ACCLIVITY™
COUNTERTOP SINK
AMERICAST
®
BRAND ENGINEERED MATERIAL
ACCLIVITY™ COUNTERTOP SINK
Americast
®
Brand Engineered Material
• Acid-resistant porcelain nish
• Large bowl area
• Self-rimming with cutout template supplied
• Chrome overow trim ring
• Shown with lavatory faucet (not included)
❏ 3409.001 Center hole only
❏ 3409.403 Faucet holes on 4" (102mm) centers
(illustrated)
❏ 3409.803 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
483mm dia. (19") Round
Bowl sizes:
368mm (14-1/2") wide
302mm (11-7/8") front to back
178mm (7") deep
Americast
®
Brand engineered material is a
composition of porcelain bonded to enameling grade
metal, bonded to a patented structural composite.
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaet.
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
FINISHED WALL
OR SPLASHBACK
OPTIONAL
102mm
(4)
C/L
241mm
(9-1/2)
79mm
(3-1/8)
483mm
(19)
COUNTERTOP
(BY OTHERS)
787mm
(31)
SUGGESTED
FINISHED
FLOOR
210mm
(8-1/4)
*260mm
(10-1/4)
SEALING
COMPOUND
*356mm
(14)
203mm
(8)
178mm
(7)
SUPPLIES
AS REQ'D
10mm
(3/8)
Revised 2/08
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Optional Trim Ring for Overow:
790730-101 Polished Brass
❏ Supplies:
❏ Trap:
* See faucet section for additional models available
/