Extron Cable Cubby 500 Template

(181 mm)

SURFACE

CUT-OUT

AREA

Trim Ring’s Outer Edge

(Do not cut this line.)

Table Clamp

(146 mm)

" (6 mm) R

” (1.5 mm)

1. Confirm the product to be installed.

2. Before printing, double check print settings

and make sure the page is not scaled.

3. Remove the surface cut-out area (gray)

from the template.

4. Measure the cutout and template.

5. Mark the position on the furniture where

the Cable Cubby 500 CCB will be installed.

6. Double check dimensions and position,

then cut the opening.

Page Size: 11" x 17"

Print Scale 1:1

Do not Shrink

Cut-Out Template for the Extron

Cable Cubby 500 CCB

P/N 68-2860-01 Rev. B

User Access