Hampton Bay HB1132-22 Installation guide

Brand: Hampton Bay

Model: HB1132-22

Type: Installation guide

Hampton Bay HB1132-22 is a versatile lighting fixture that combines the elegance of a chandelier with the functionality of a ceiling fan. Featuring a brushed nickel finish and five reversible blades, this fixture offers both style and airflow. With its dimmable LED light kit and three-speed motor, you can customize the ambiance and airflow to suit your needs. Installation is easy with the included hardware and step-by-step instructions.

INSTRUCTIONS MANUAL

CEILING FLUSH MOUNT FIXTURE

Page 1

HOME DEPOT SKU# 284-604 (UPC# 046335811003)

Page 2

Thank you for purchasing this Hampton Bay Ceiling Flush Mount

Fixture. This product has been manufactured with the highest standards

of safety and quality.

FEATURES:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (284-604) or UPC (046335811003).

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

2. Handsome sandstone textured finish complimented by a faux

alabaster glass.

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you have any non-electrical

questions about this fixture, please call our Customer Service Team at

1-877-527-0313 or visit www.homedepot.com. Please reference your

SKU (284-604) or UPC (046335811003).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY

(not included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

2 Light Bulbs (60

watt maximum)

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

Page 4

1 ea Fixture Pan (#1)

1 ea Glass

Shade (#2)

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation Instructions.

3. Install two incandescent Light Bulbs (#17) into the sockets of the Fixture Pan (#1). Do

not exceed 60 watts for each incandescent light bulb. (Fig. 1)

4. Slide the Glass Shade (#2) onto the Fixture Pan (#1) and turn it clockwise until secure.

(Fig. 1)

ASSEMBLY:

Page 5

2. Glass

Shade

1. Fixture

Pan

17. Light

Bulb

Fig. 1

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to

scale):

INSTALLATION INSTRUCTIONS:

3 ea Wire

Nuts (#14)

2 ea Bracket Mounting

Screws (#8)

1. Thread the Fixture Mounting Screws (#6) into the provided holes of the Mounting Bracket (#7) as shown.

Thread the Hex Nuts (#9) onto the Fixture Mounting Screws (#6), as shown. Do not tighten the Hex Nuts

(#9) at this time. (Fig. 2)

2. Pull the power supply wires out from the Outlet Box (#4), and mount the Mounting Bracket (#7) to the

Outlet Box (#4), using the Bracket Mounting Screws (#8). (Fig. 3)

3. Attach the Black Supply Wire (#5) to the Black Fixture Wire (#12) and the White Supply Wire (#16) to

the White Fixture Wire (#13) using Wire Nuts (#14). Connect the Fixture Ground Wire (#11) and the

Supply Ground Wire (#15) together using a Wire Nut (#14). Wrap all wire connections with electrical

tape for a more secure connection. (Fig. 4) Note: If you have electrical questions, consult your local

electrical code for approved grounding methods.

4. Place the Fixture Pan (#1) over the Outlet Box (#4) and onto the Fixture Mounting Screws (#6), and

adjust the Fixture Mounting Screws (#6) until they protrude out from the Fixture Pan (#1) 1/4". Remove

the Fixture Pan (#1) and secure the position of the Fixture Mounting Screws (#6) by tightening the Hex

Nuts (#9) against the Mounting Bracket (#7). Place the Fixture Pan (#1) back onto the Fixture Mounting

Screws (#6), and secure it into place using the Lock Nuts (#3) provided. (Fig. 4)

5. Proceed to Step 3 of the Installation Instructions.

6. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to

activate the fixture.

1 ea Mounting

Bracket (#7)

2 ea Fixture Mounting

Screws (#6)

2 ea Hex

Nuts (#9)

2 ea Lock

Nuts (#3)

Page 7

INSTALLATION:

10. Ceiling

4. Outlet Box

8. Bracket

Mounting

Screw

7. Mounting

Bracket

9. Hex Nut

6. Fixture

Mounting

Screw

Fig. 2

Fig. 3

3. Lock Nut

13. White Fixture Wire

11. Fixture Ground Wire

14. Wire Nut

16. White Supply Wire

5. Black Supply Wire

15. Supply Ground Wire

7. Mounting Bracket

9. Hex Nut

6. Fixture Mounting Screw

12. Black Fixture Wire

4. Outlet Box

10. Ceiling

1. Fixture Pan

Fig. 4

Page 8

Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker

trips when light is turned on.

1. Crossed wires or power wire is grounding

out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the

fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of two (2) years from date of purchase. This warranty applies only to the original consumer

purchaser and only to products used in normal use and service. If this product is found to be defective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of of the product at

the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product

that is found to have been improperly installed, set-up, or used in any way not in accordance with the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to

faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,

such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not

warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a

particular purpose, other than the warranty contained herein. The manufacturer specifically

disclaims any liability and shall not be liable for any consequential or incidental loss or damage,

including but not limited to any labor/expense costs involved in the replacement or repair of said

product.

MANUAL DE INSTRUCCIONES

LUMINARIA DE MONTAJE A RAS DEL TECHO

Page 9

HOME DEPOT SKU# 284-604 (UPC# 046335811003)

Page is loading ...

MODE D’INSTALLATION

PLAFONNIER ENCASTRÉ

Page 17

HOME DEPOT UGS Nº 284-604 (CUP Nº 046335811003)

Page is loading ...

Hampton Bay HB1132-22 Installation guide

Brand: Hampton Bay

Model: HB1132-22

Type: Installation guide

Download PDF

report

in other languages

français: Hampton Bay HB1132-22 Guide d'installation
español: Hampton Bay HB1132-22 Guía de instalación

Hampton Bay HB1132-22 Installation guide

Hampton Bay HB1132-22 Installation guide

in other languages

Related papers

Other documents