Hampton Bay HB1047-01 Installation guide

Brand: Hampton Bay

Model: HB1047-01

Type: Installation guide

Hampton Bay HB1047-01 gives you the option to illuminate your home with an outdoor ceiling light that is both stylish and functional. The seeded glass and brushed nickel finish of this ceiling light add a transitional element to your home's exterior. This light is dimmable, allowing you to control the brightness to your liking and set the ambiance for your space. It's also sloped ceiling compatible, so you can install it on angled ceilings without any issues.

INSTRUCTIONS MANUAL

CEILING FLUSH MOUNT FIXTURE

Page 1

HOME DEPOT SKU# 169-350 (UPC# 046335942004)

Page 2

Thank you for purchasing this Hampton Bay Ceiling Flush Mount

Fixture. This product has been manufactured with the highest standards

of safety and quality.

FEATURES:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (169-350) or UPC (046335942004).

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

2. Handsome Polished Brass finish with Frosted/Clear glass.

3. For energy savings this fixture has been engineered to safely use a

Self Ballasted Compact Fluorescent Lamp in place of an incandescent

lamp.

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous

fixture, disconnect the power by turning off the circuit breaker or by

removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you have any non-electrical

questions about this fixture, please call our Customer Service Team

at 1-877-527-0313 or visit www.homedepot.com. Please reference

your SKU (169-350) or UPC (046335942004).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY

(not included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

Light Bulb (60

watt maximum or

CFL equivalent)

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

Page 4

1 ea Fixture Pan (#1)

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation Instructions.

3. Install an incandescent Light Bulb (#2) or a Listed SBCFL (Self-Ballasted Compact

Fluorescent Lamp [not provided]) into the socket of the Fixture Pan (#1). Do not exceed a

60 watt incandescent light bulb, or a 14 watt SBCFL. (Fig. 1)

4. Attach the Nipple (#19) onto the Fixture Pan (#1). (Fig. 1)

5. Place the Glass Shade (#17) over the Fixture Pan (#1), making sure the Nipple (#19) feeds

through its center hole. Slide the Decorative Cap (#18) onto the Nipple (#19). (Fig. 1)

6. Thread the Finial (#13) onto the Nipple (#19) to secure the Glass Shade (#17) onto the

Fixture Pan (#1). (Fig. 1)

1 ea Glass Shade (#17)

1 ea Decorative

Cap (#18)

1 ea

Finial

(#3)

1 ea Nipple

(#19)

ASSEMBLY:

Page 5

17. Glass

Shade

2. Light Bulb

1. Fixture Pan

Fig. 1

3. Finial

18. Decorative

Cap

19. Nipple

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to

scale):

INSTALLATION INSTRUCTIONS:

3 ea Wire Nuts (#10)

2 ea Mounting Bracket

Screws (#5)

1. Thread the Fixture Mounting Screws (#8) into the Mounting Bracket (#4), as shown. (Fig. 2)

2. Attach the Mounting Bracket (#4) to the Outlet Box (#6) using the Mounting Bracket Screws

(#5), as shown. (Fig. 2)

3. Pull the power supply wires out from the Outlet Box (#6). Attach the Black Supply Wire (#14)

to the Black Fixture Wire (#15) and the White Supply Wire (#9) to the White Fixture Wire

(#11) using Wire Nuts (#10). Connect the Fixture Ground Wire (#12) and the Supply Ground

Wire (#13) together using a Wire Nut (#10). (Fig. 3) Wrap all wire connections with electrical

tape for a more secure connection. Note: If you have electrical questions, consult your local

electrical code for approved grounding methods.

4. Carefully, tuck all the wires and wire connections into the Outlet Box (#6). Place the Fixture

Pan (#1) over the Outlet Box (#6) and onto the Fixture Mounting Screws (#8), making sure they

feed through the Keyhole Slots (#16). (Fig. 4)

5. Twist the Fixture Pan (#1) clockwise, so that the Fixture Mounting Screws (#8) slide into the

narrow ends of the Keyhole Slots (#16). Tighten the Fixture Mounting Screws (#8) so that the

Fixture Pan (#1) is secured flush against the Ceiling (#7). (Fig. 4 and 4-1)

6. Proceed to Step 3 of the Assembly Instructions.

7. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch

on to activate the fixture.

2 ea Mounting Bracket (#4)

2 ea Fixture Mounting

Screws (#8)

Page 7

INSTALLATION:

11. White Fixture Wire

12. Fixture Ground Wire

10. Wire Nut

9. White Supply Wire

14. Black Supply Wire

13. Supply Ground Wire

8. Fixture Mounting

Screw

15. Black Fixture Wire

6. Outlet Box

7. Ceiling

1. Fixture Pan

Fig. 2

Fig. 3

5. Mounting Bracket

Screw

8. Fixture Mounting

Screw

4. Mounting Bracket

INSTALLATION (CONT.):

6. Outlet Box

8. Fixture Mounting

Screw

1. Fixture Pan

7. Ceiling

Fig. 4

Page 8

8. Fixture

Mounting

Screw

16. Keyhole

Slot

8. Fixture

Mounting

Screw

16. Keyhole

Slot

Bottom View

Fig. 4-1

Page 9

Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit breaker

trips when light is turned on.

1. Crossed wires or power wire is grounding

out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of

the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of two (2) years from date of purchase. This warranty applies only to the original consumer

purchaser and only to products used in normal use and service. If this product is found to be defective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of of the product at

the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product

that is found to have been improperly installed, set-up, or used in any way not in accordance with the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to

faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product,

such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not

warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a

particular purpose, other than the warranty contained herein. The manufacturer specifically

disclaims any liability and shall not be liable for any consequential or incidental loss or damage,

including but not limited to any labor/expense costs involved in the replacement or repair of said

product.

Page is loading ...

MANUAL DE INSTRUCCIONES

LUMINARIA DE MONTAJE A RAS DEL TECHO

HOME DEPOT SKU# 169-350 (UPC# 046335942004)

Page 11

Page is loading ...

MODE D’INSTALLATION

PLAFONNIER

HOME DEPOT UGS Nº 169-350 (CUP Nº 046335942004)

Page 21

Page is loading ...

Hampton Bay HB1047-01 Installation guide

Brand: Hampton Bay

Model: HB1047-01

Type: Installation guide

Download PDF

report

in other languages

français: Hampton Bay HB1047-01 Guide d'installation
español: Hampton Bay HB1047-01 Guía de instalación

Hampton Bay HB1047-01 Installation guide

Hampton Bay HB1047-01 Installation guide

in other languages

Related papers

Other documents