Hampton Bay Y7065-34 Installation guide

INSTRUCTIONS MANUAL

CEILING FLUSH MOUNT FIXTURE

ITEM# 559

-

827

ITEM#

559

827

(UPC# 046335958920)

Page 1

Thank you for purchasing this Hampton Bay Ceiling Flush Mount

Fixture. This product has been manufactured with the highest

standards of safety and quality.

FEATURES:

1. Easy to install.

2. Handsome Polished Brass finish with Frosted/Clea

r

glass.

3. For energy savings this fixture has been engineered to safely

use a Self Ballasted Compact Fluorescent Lamp in place of an

id t

l

QUESTIONS PROBLEMS MISSING PARTS

i

ncan

d

escen

t

l

amp.

Before returning to your local Home Depot, please call our

Customer Service Team at 1-877-527-0313 or visit

www.homede

p

ot.com. Please reference

y

ou

r

UPC

QUESTIONS

,

PROBLEMS

,

MISSING

PARTS

:

p

y

(046335958920).

Page 2

CAUTION:

1. Before starting installation of this fixture or removal of a

previous fixture, disconnect the power by turning off the circuit

bk

b

i

th

f

t

th

f

b

rea

k

e

r

o

r

b

y remov

i

ng

th

e

f

use a

t

th

e

f

use

b

ox.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS. If you have any non-electrical

questions

about

this

fixture

please

call

our

Customer

Service

questions

about

this

fixture

,

please

call

our

Customer

Service

Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your UPC (046335958920).

3

KEEP

your

receipt

and

these

Instructions

for

Proof

of

3

.

KEEP

your

receipt

and

these

Instructions

for

Proof

of

Purchase.

TOO S REQUIRED FOR INSTA ATION AND ASSEMB Y (

TOO

L

S

REQUIRED

FOR

INSTA

LL

ATION

AND

ASSEMB

L

Y

(

not

included):

Wire

strippers

Phillips

screwdriver

Wire

cutters

Flathead

screwdriver

Page 3

Safety

goggles

Electrical

tape

Light Bulb (60 watt

maximum or CFL

equivalent)

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1 ea Coupling (#18)

1 ea Finial (#27)

1 ea Outer Shade (#25)

1 ea Nipple (#20)

1 S ll W h (#21)

1 ea Spacer (#24)

1 ea Decorative Cap (#28)

1 ea Rubber Gasket (#29)

1 ea Inner Shade (#22)

1

ea

S

ma

ll

W

as

h

er

(#21)

1 ea Large Washer (#26)

1 ea Shade Cup (#23)

ASSEMBLY INSTRUCTIONS:

1 ea Fixture Pan (#1) 1 ea Stem (#19)

2 ea Hex Nut (#17)

ASSEMBLY

INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean

surface.

2.

Before

continuing

Assembly,

please

proceed

to

the

Installation

2.

Before

continuing

Assembly,

please

proceed

to

the

Installation

Instructions.

3. Install an incandescent Light Bulb (#2) or a Listed SBCFL

(

Self-Ballasted Com

p

act Fluorescent Lam

p

[

not

p

rovided

])

into

(

p

[

p])

the socket of the Fixture Pan (#1). Do not exceed a 60 watt

incandescent light bulb, or a 14 watt SBCFL. (Fig. 1)

4. Attach the Stem (#19) onto the Fixture Pan (#1). (Fig. 1)

Page 4

5. Thread the Hex Nut (#17) and the Coupling (#18) onto the

Stem (#19). (Fig. 1)

6. Thread the Nipple (#20) into the Coupling (#18). (Fig. 1)

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

7. Slide the Small Washer (#21), Inner Shade (#22) and the

Shade Cup (#23) onto the Coupling (#18). Thread the Spacer

(#24) onto the Coupling (#18) and tighten until the Inner

Shade (#22) is secured in place. (Fig. 1)

8. Fasten the Rubber Gasket (#29) around the rim of the Outer

Shade (#25). (Fig. 1)

9

Slid

th

Ot

Sh d

(#

25

)

d

th

L

Wh

(#

26

)

t

9

.

Slid

e

th

e

O

u

t

e

r

Sh

a

d

e

(#

25

)

an

d

th

e

L

arge

W

as

h

e

r

(#

26

)

on

t

o

the Nipple (#20). Thread the Hex Nut (#17) onto the Nipple

(#20) and tighten until the Outer Shade (#25) is secured in

place. (Fig. 1)

10.Slide the Decorative Cap (#28) onto the Nipple (#20). Thread

the Finial (#27) onto the Nipple (#20). (Fig. 1)

Page 5

ASSEMBLY:

1. Fixture Pan

2. Light Bulb

19 Stem

18. Cou

p

lin

g

19

.

Stem

17. Hex Nut

20. Nipple

pg

21. Small Washer

22. Inner

Shade

Fig. 1

23. Shade Cup

25 O t

Sh d

24. Spacer

29. Rubber

Gasket

28

Decorative Cap

25

.

O

u

t

er

Sh

a

d

e

17. Hex Nut

26. Large Washer

Page 6

27. Finial

28

.

Decorative

Cap

PARTS INCLUDED FOR INSTALLATION (parts are not to

scale):

2 ea Mounting Bracket (#4)

2 ea Fixture Mounting

Screws (#8)

3eaWireNuts

2 ea Mountin

g

Bracket

INSTALLATION INSTRUCTIONS:

3

ea

Wire

Nuts

(#10)

g

Screws (#5)

1. Thread the Fixture Mounting Screws (#8) into the Mounting Bracket (#4), as shown. (Fig. 2)

2. Attach the Mounting Bracket (#4) to the Outlet Box (#6) using the Mounting Bracket Screws

(#5), as shown. (Fig. 2)

3. Pull the power supply wires out from the Outlet Box (#6). Attach the Black Supply Wire (#14) to

the Black Fixture Wire (#15) and the White Supply Wire (#9) to the White Fixture Wire (#11)

using Wire Nuts (#10). Connect the Fixture Ground Wire (#12) and the Supply Ground Wire

(#

13

)

tth

i

Wi

Nt

(#

10

)

(Fi

3

)

W

ll

i

ti

ith

ltil

t

f

(#

13

)

t

oge

th

e

r

us

i

ng a

Wi

re

N

u

t

(#

10

)

.

(Fi

g.

3

)

W

rap a

ll

w

i

re connec

ti

ons w

ith

e

l

ec

t

r

i

ca

l

t

ape

f

o

r

a more secure connection. Note: If you have electrical questions, consult your local electrical

code for approved grounding methods.

4. Carefully, tuck all the wires and wire connections into the Outlet Box (#6). Place the Fixture Pan

(#1) over the Outlet Box (#6) and onto the Fixture Mounting Screws (#8), making sure they feed

through

the

Keyhole

Slots

(#

16

)

(Fig

4

)

through

the

Keyhole

Slots

(#

16

)

.

(Fig

.

4

)

5. Twist the Fixture Pan (#1) clockwise, so that the Fixture Mounting Screws (#8) slide into the

narrow ends of the Keyhole Slots (#16). Tighten the Fixture Mounting Screws (#8) so that the

Fixture Pan (#1) is secured flush against the Ceiling (#7). (Fig. 4 and 4-1)

6.

Proceed

to

Step

3

of

the

Assembly

Instructions

.

Page 7

6.

Proceed

to

Step

3

of

the

Assembly

Instructions

.

7. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch

on to activate the fixture.

INSTALLATION:

6. Outlet Box

7. Ceiling

4. Mounting Bracket

Fig. 2

5. Mounting Bracket

Screw

8. Fixture Mountin

g

Screw

9. White Supply Wire

14. Black Supply Wire

13. Supply Ground Wire

8. Fixture Mounting

Screw

11. White Fixture Wire

12. Fixture Ground Wire

10. Wire Nut

15. Black Fixture Wire

1. Fixture

Pan

Fig 3

Page 8

Fig

.

3

INSTALLATION (CONT.):

6. Outlet

Box

7. Ceiling

8. Fixture

Mti

1. Fixture

Pan

Fig. 4

M

oun

ti

ng

Screw

Bottom View

Bottom

View

Fig. 4-1

8 Fixture

Page 9

8

.

Fixture

Mounting

Screw

16. Keyhole

Slot

8

.

Fixture

Mounting

Screw

16. Keyhole

Slot

Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2Faultyswitch

2Testorreplaceswitch

Light will not turn on.

TROUBLESHOOTING:

2

.

Faulty

switch

.

2

.

Test

or

replace

switch

.

3. Faulty wire connection. 3. Check wiring.

Fuse blows or circuit

breaker trips when light is

turned on.

1. Crossed wires or power wire is

grounding out.

1. Check wire connections.

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use

clean water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off

the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or

slightly dampened clean cloth (use cleanwater,neverasolvent)towipethe

interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a

dry soft cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacture

r

warrants this lighting fixture to be free from defects in materials and

workmanship for a period of five (5) years from date of purchase. This warranty applies only to the

original consumer purchaser and only to products used in normal use and service. If this product is

found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair

or replacement of of the product at the manufacturer’s discretion, provided that the product has not

been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

This

warranty

shall

not

apply

to

any

product

that

is

found

to

have

been

improperly

installed

set

up

This

warranty

shall

not

apply

to

any

product

that

is

found

to

have

been

improperly

installed

,

set

-

up

,

or used in any way not in accordance with the instructions supplied with the product. This warranty

shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or

weathering, as this is considered normal wear and tear. The manufacturer does not warrant and

specially

disclaims

any

warranty

whether

expressed

or

implied

of

fitness

for

a

particular

Page 10

specially

disclaims

any

warranty

,

whether

expressed

or

implied

,

of

fitness

for

a

particular

purpose, other than the warranty contained herein. The manufacturer specifically disclaims

any liability and shall not be liable for any consequential or incidental loss or damage,

including but not limited to any labor/expense costs involved in the replacement or repair

of said product.

MANUAL DE INSTRUCCIONES

LUMINARIA DE MONTAJE A RAS DEL TECHO

# 559

-

827

#

559

827

(UPC# 046335958920)

Page 11

Page is loading ...

MODE D’INSTALLATION

PLAFONNIER

# 559-827

(CUP Nº 046335958920)

Page 21

Page is loading ...

Hampton Bay Y7065-34 Installation guide

Hampton Bay Y7065-34 Installation guide

in other languages

Related papers

Other documents