Label Picture Description QTY
A Table Top 1
B Leg 3
Assembly Instructions
Caution : You must read this before you proceed
END TABLE
Part List
Page 1 of 4
Before
Beginning
Assembly:
This End Table has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the End Table parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and
steps before assembly.
Assembly Preparation
Assembly Steps
Overview
Leg (B)
Table Top (A)
Page 2 of 4
Step 1
Step 2
Step 3
Open the carton and place all parts onto a clean, non-marring surface.
Remove the Black Cover on the threaded stem of the Legs(B).
Place the Table Top(A) facedown as shown above.
Then, insert the Leg(B) into the bottom of the Table Top(A).
Tighten by turning Leg(B) clockwise by hand.
Repeat the same process to attach the remaining two Legs.
Page 3 of 4
With assistance from your adult partner, stand the Table up.
Your End Table is now ready for use.
This End Table can be only used on a flat, level surface.
Care & Maintenance
Page 4 of 4
-
1
-
2
-
3
-
4
