Noble House 41648 Operating instructions

Brand: Noble House

Model: 41648

Type: Operating instructions

Caution : You must read this before you proceed

CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of

assembly.

For turning the chair and to prevent damage to the Table, 02 persons may be needed to

execute this action

ROCKING CHAIR

Noble House Home Furnishings LLC 1 of 7

Label Picture Description QTY

A Backrest Panel 1

B

Right Arm with Leg

Panel

1

C

Left Arm with Leg

Panel

1

D Seat Panel 1

E Back Cushion 1

F Seat Cushion 1

No. Picture Description Qty

①

Allen Key 2

②

Screw (M7*70mm) 9

Noble House Home Furnishings LLC 2 of 7

Before Beginning Assembly:

This Chair has multiple parts and may require up to some 30 minutes to

assemble. To give you an overview of the Chair, the above picture is to

help you put the various parts into perspective. Please read through the

instructions here below to familiarise the parts and steps before

assembly.

OVERVIEW

Back Cushion

(E)

Backrest

Panel (A)

Left Leg

Panel (C)

Right Leg Panel

(B)

Seat

Cushion(F)

Seat Panel (D)

FRONT FACING

Noble House Home Furnishings LLC 3 of 7

Unpack and place all parts on a clean, non-marring surface.

Step 2

2.1) Position Seat Panel (D) to Left Leg Panel (C) and then position Right

Leg Panel (B) onto Seat Panel (D) as shown in picture above

2.2) Secure Right Leg Panel (B) to Seat Panel (D) by using 2 Screws (②

)

and Allen Key (

①

)

Do not fully tighten the Screws.

Step 1

2.1

2.2

Noble House Home Furnishings LLC 4 of 7

Step 4

With assistance from your adult partners, turn the Chair into the other

side.

Repeat the same process of step 2 to secure Left Leg Panel (C) with

Seat Panel (D) by using 2 Screws (

②

) and Allen Key (

①

).

Do not fully tighten the Screws.

Turn the Chair right side up.

Position Backrest Panel (A) to Leg Panels (B & C) as the picture above

Secure Leg Panels (B), (C) to Backrest Panel (A) by using 4 Screws (②)

and Allen Key (

①

)

Do not fully tighten the Screws.

Step 3

Noble House Home Furnishings LLC 5 of 7

Step 5

Inspect the Chair and make sure all parts are connected.

Place Back Cushion (E) and Seat Cushion (F) onto the Chair

Tie the velcro straps of Back Cushion (E) to Backrest Panel (A) and Seat

Cushion (F) to Seat Panel (D).

Your Chair is ready for use.

This Chair can only be used on a flat, level surface.

Noble House Home Furnishings LLC 6 of 7

Noble House Home Furnishings LLC 7 of 7

1
2
3
4
5
6
7

Noble House 41648 Operating instructions

Brand: Noble House

Model: 41648

Type: Operating instructions

Related papers