2. ADTRAN
  3. Total Access 1000

ADTRAN Total Access 1000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the ADTRAN Total Access 1000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TOTAL ACCESS
®
1000 DSLAM ATM PSU
■ For a complete Installation and Maintenance Practice (P/N 61179008L1-5): ( 877) 457-5007, Faxback Document 851. Please have your FAX number ready. ■
JOBAID
PRICING AND AVAILABILITY 800.827.0807
TECHNICAL SUPPORT 800.726.8663
RETURN FOR REPAIR 256.963.8722
www.adtran.com
0209 61179008L1-22A
ATM PSU
CLEI: VAPUCJOC _ _
ATM PSU
1179008L1
POWER
1
2
3
C A U T I O N
C A U T I O N
!
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
DESCRIPTION
The ATM PSU is a common module designed for use in the Total Access 1000 DSLAM.
The ATM PSU features:
■
Converts incoming -190V span power to regulated buss voltages
■
Provision free plug-and-play
■
Front panel status LED
■
Meets FCC, NEBS Level 3, and UL 60950
TURNUP STEPS
Unpack the Total Access 1000 DSLAM ATM PSU card and inspect for damage. If
damage is apparent, refer to your carrier or supplier for remedy.
Insert ATM PSU card into the Total Access 1000 DSLAM slot marked PSU. To insert,
hold the ATM PSU card by the front panel while supporting the bottom edge of the
card. Align the card edge with the guide groove in the Total Access 1000 chassis.
Insert into chassis until the edge card connector seats firmly into the chassis back-
plane. Lock the unit in place by pushing in on the locking levers.
Monitor LED for operational status.
STATUS LED
PWR ● GREEN Span power and system voltages present
●● OFF No span power present or PSU fault
COMPLIANCE
This product is intended to be installed in products providing a Type “B” or “E”
enclosure, and in a Restricted Access Location.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by ADTRAN could void the user’s
authority to operate this equipment.
WARRANTY
Warranty for Carrier Networks products manufactured by ADTRAN and supplied
under Buyer’s order for use in the U.S. is ten (10) years. For a complete copy of
ADTRAN’s U.S. and Canada Carrier Networks Equipment Warranty
(P/N 60000087-10): (877) 457-5007, Faxback Document 414.
Code Input Output
Power Code (PC) C C
Telecommunication Code (TC) X –
Installation code (IC) A –
/