ADTRAN Total Access 1000 Owner's manual

Brand: ADTRAN

Model: Total Access 1000

Type: Owner's manual

ADTRAN Total Access 1000 is a DSLAM (Digital Subscriber Line Access Multiplexer) ATM PSU (Asynchronous Transfer Mode Power Supply Unit) that can convert incoming -190V span power to regulated buss voltages. The Total Access 1000 meets FCC, NEBS Level 3, and UL 60950 standards and is intended to be installed in products providing a Type “B” or “E” enclosure, and in a Restricted Access Location.

TOTAL ACCESS

1000 DSLAM ATM PSU

■ For a complete Installation and Maintenance Practice (P/N 61179008L1-5): ( 877) 457-5007, Faxback Document 851. Please have your FAX number ready. ■

JOBAID

PRICING AND AVAILABILITY 800.827.0807

TECHNICAL SUPPORT 800.726.8663

RETURN FOR REPAIR 256.963.8722

www.adtran.com

0209 61179008L1-22A

ATM PSU

CLEI: VAPUCJOC _ _

ATM PSU

1179008L1

POWER

C A U T I O N

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY.

HANDLING PRECAUTIONS REQUIRED.

DESCRIPTION

The ATM PSU is a common module designed for use in the Total Access 1000 DSLAM.

The ATM PSU features:

■

Converts incoming -190V span power to regulated buss voltages

■

Provision free plug-and-play

■

Front panel status LED

■

Meets FCC, NEBS Level 3, and UL 60950

TURNUP STEPS

Unpack the Total Access 1000 DSLAM ATM PSU card and inspect for damage. If

damage is apparent, refer to your carrier or supplier for remedy.

Insert ATM PSU card into the Total Access 1000 DSLAM slot marked PSU. To insert,

hold the ATM PSU card by the front panel while supporting the bottom edge of the

card. Align the card edge with the guide groove in the Total Access 1000 chassis.

Insert into chassis until the edge card connector seats firmly into the chassis back-

plane. Lock the unit in place by pushing in on the locking levers.

Monitor LED for operational status.

STATUS LED

PWR ● GREEN Span power and system voltages present

●● OFF No span power present or PSU fault

COMPLIANCE

This product is intended to be installed in products providing a Type “B” or “E”

enclosure, and in a Restricted Access Location.

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Changes or modifications not expressly approved by ADTRAN could void the user’s

authority to operate this equipment.

WARRANTY

Warranty for Carrier Networks products manufactured by ADTRAN and supplied

under Buyer’s order for use in the U.S. is ten (10) years. For a complete copy of

ADTRAN’s U.S. and Canada Carrier Networks Equipment Warranty

(P/N 60000087-10): (877) 457-5007, Faxback Document 414.

Code Input Output

Power Code (PC) C C

Telecommunication Code (TC) X –

Installation code (IC) A –

ADTRAN Total Access 1000 Owner's manual

ADTRAN Total Access 1000 Owner's manual

ADTRAN Total Access 1000 Owner's manual

Related papers

Other documents