2. Thermo Fisher Scientific
  3. Owl D2 Gradient Gel Caster

Thermo Fisher Scientific Owl D2 Gradient Gel Caster Operating instructions

  • Hello! I have read the user manual for the Gel Caster D2 Wide Gel Caster. This document provides instructions on how to cast gels using the external caster, including steps for preparing the gel tray, pouring the agarose solution, and preparing the gel for running. I am ready to answer your questions about the device.
  • What is the first step in gel casting with the external caster?
    What should be poured onto the UVT gel tray?
    What should be done after the gel solidifies?
Part of Thermo Fisher Scientific
Thermo Scientific D2 Wide Gel Caster
Gel Casting With Owl's External Caster
1. Place the UVT gel tray into the
external gel caster. The gasketed sides
of the UVT gel tray form a leak proof
seal along the side of the external gel
caster.
2. Prepare and pour warm (>60o)
agarose solution onto the UVT gel
tray(s).
3. Place comb(s) into slots provided on
walls of UVT gel tray. Once the gel has
solidified, place the UVT gel tray into
the buffer chamber, add buffer, load
samples, and run the gel.
© 2012 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative
for details.
>> For more information, visit: www.thermoscientifc.com/owlsci
/