2. Thermo Fisher Scientific
  3. Owl A1 Gradient Gel Caster

Thermo Fisher Scientific Owl A1 Gradient Gel Caster Operating instructions

  • Hello! I've reviewed the user manual for the Thermo Scientific A1 Gel Caster with Owl's End Gate Casting System. This document provides a step-by-step guide on how to prepare and run a gel. I am ready to answer any questions you might have about the process or the device's features.
  • What is the first step in gel casting?
    What type of solution is poured onto the gel tray?
    What is the next step after pouring the agarose solution?
    What should be done after removing the end gates?
Part of Thermo Fisher Scientific
Thermo Scientific A1 Gel Caster
Gel Casting Using Owl's End Gate Casting System
1. Place the two end gates into the tray
with the gasket side facing out.
2. Prepare and pour warm (>60o)
agarose solution onto the UVT gel
tray(s).
3. Place combs into slots provided on
the walls of the UVT gel tray.
4. Remove the end gates, place the UVT
gel tray in the buffer chamber, add
buffer, load samples, and run the gel.
© 2012 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative
for details.
>> For more information, visit:
www.thermoscientifc.com/owlsci
/