2. BLOTZ
  3. B28-SF-235

BLOTZ B28-SF-235 Assembly Instructions

  • Hello! I've reviewed the instructions for the BLOTZ 28mm Round Console model B28-SF-235. This document provides step-by-step guidance on assembling the console, including gluing, painting, and attaching the components. I'm ready to answer your questions about the model and instructions.
  • What kind of glue is needed?
    What tools are required?
    Should I paint the components?
28mm Round Console
B28-SF-235
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in
place while you allow glue to dry.
Each section of the console is made from the pieces
shown above.
Stick the two uprights to the rectangular piece.
Then add the top piece.
We suggest you paint the components of your model
at this point.
The sections once painted.
Stick the sections to the base.
Painting
We sprayed all the components of our model with a white car undercoat aerosol primer, then once dry we painted in
the various screens and buttons using model paints.
/