Acnodes FES7471 User manual

Brand: Acnodes

Model: FES7471

Type: User manual

This manual is also suitable for

FES7470

For lastest product information, please v isit Acnodes’ website at www.acnodes.com

146

28 Central Ave. Chino, CA 91710

Tel: 909.597.7588 Fax: 909.597.1939

The documentation and the software included with this product are copyrighted 2017

by Acnodes. All rights are reserved. Acnodes reserves the right to make

improvements in the products described in this manual at any time without notice. No

part of this manual may be reproduced, copied, translated or transmitted in any form

or by any means without the prior written permission of Acnodes. Information provided

in this manual is intended to be accurate and reliable. However, Acnodes assumes no

responsibility for its use, nor for any infringements of the rights of third parties, which

may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporatio

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it

fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

 If one of the following situations arises, get the equipment checked by service

personnel:

 The power cord or plug is damaged.

 Liquid has penetrated into the equipment.

 The equipment has been exposed to moisture.

 The equipment does not work well, or you cannot get it to work according to

the user's manual.

 The equipment has been dropped and damaged.

 The equipment has obvious signs of breakage.

14. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE

THESTORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE

55° C(131° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

15. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself

from harm and the products from

damage.

 To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

 Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive

electronic components.

Contents

Chapter 1: General Introduction.................................................................................1

1.1 Overview..............................................................................................1

1.2 Key Features....................................................................................2

1.3 Hardware Specification...............................................................3

1.4 I/O Arrangement...........................................................................5

1.5 Mechanical Dimension....................................................................10

Chapter 2: System Setup ................................................................12

2.1 Power Installation Procedure....................................................11

2.2 Installing 2.5" HDD..................................................................13

2.3 Installing Wall-mount Bracket..................................................15

2.4 Installing Memory and Internal Expansion Device...................16

2.5 Installing PCI/PCIe Expansion Card..........................................17

2.6 com3-4 setting ( RS232/422/485)..........................................18

C h a p te r 3 : B I O S S et u p . . . . .. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9

3.1 Main Setup..........................................................................20

3.2 Advanced BIOS Features Setup.............................................21

3.2.1 PCI Subsystem Settings...............................................22

3.2.2 ACPI Settings................................................................23

3.2.3 Trust Computing..........................................................23

3.2.4 S5 RTC Wake Setting.......................................................24

3.2.5 CPU Configuration.......................................................25

3.2.6 PCH-FW Configuration....................................................27

3.2.7 AMT Configuration........................................................28

3.2.8 USB Configuration.........................................................29

3.2.9 Smart Setting.................................................................30

3.2.10 Platform Misc Configuration...........................................31

3.2.11 Super IO C onfiguration.............................................32

3.2.12 H/W Monitor............................................................33

3.3 Chipset....... .... .................. ........ ..... .... ................................34

3.3.1 PCH-IO Configuratio n...................................................35

3.3.2 PCI Express Confi guratio n...........................................36

3.3.3 SATA Configuration.....................................................37

3.3.4 USB Configuration.........................................................37

3.3.5 System Agent (SA) Configuration...................................38

3.3.6 Graphics Configuration...................................................39

3.4 Boot........................................................................................41

3.5 Security.....................................................................................42

3.6 Save & Exit..........................................................................................43

3.1 Main Menu...........................................................................17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 1 8

3.3 Chipset Menu...........................................................................28

3.4 Security Menu.............................................................................32

3.5 Boot Menu.............................................................................34

3.6 Exit Menu....... ................. ... ........... . . ....... . ........ ....................

age 1

Chapter1. General Introduction

1.1 Overview

Acnodes FES741X Series is an exceptional fan base ex

pandable embedded

computer with configurable PCIe/PCI slots. It is designed to provide a reliable

platform for a wide variety of applications by accepting standard PCI cards. The

FES741X Series can operate in -20 to 55° C temperatures and its cableless

structure provides additional durability for long-term usage. Featuring an Intel®

Xeon / Core™ i processor, the FES741X Series delivers exceptional performance

at low power. The PCIe/PCI slots enable integration of off-the-shelf PCIe/PCI

cards for a configurable application platform. Generic I/O interfaces, such as

Gigabit Ethernet, COM port, and USB are also provided for connecting devices.

Acnodes FES741X Series is the perfect combination of configurability, reliability,

durability, and compactness. With the FES741X Series creating your rugged

application system has never been easier.

( Front Cover/IO Cover )

age 2

( Heat sink )

.2 Key Features

Expandable Fanbase Box PC, Intel® Xeon / Core™ i Processor

DDR4 2133 MHz SODIMM up to 32 GB

1 DVI-D(option), 1 DP (option), 4 COM, 2 GbE, 5 USB 3.0,

Internal Expansion slot:

(FES7470) 3 PCI/1PCIe x16 / (FES7471) 1 PCIex8/2 PCIex4/1 PCIex1.

250W AC Power Input

-20 ~ 55° C Operating Temperature

ge 3

1.3 Hardware Specification

Model FES7470 / FES7471

Processor

System

CPU Intel Xeon E3 1200v5 series, 6th/7th Gen Core™

i7/i5 Processor,

System Chipset (FES7470) H110 (FES7471) C236

BIOS A

MI 128Mbit SPI Flash

Memory Technology (FES7470) D

ual channel DDR4 2133 MHz (Non-ECC) SDRAM

(FES7471) Dual channel DDR4 2133 MHz (ECC) SDRAM

Max. Capacity 32 GB, (8 GB per DIMM)

Socket 2

, 260-pin SO-DIMM

Display Graphics Engine Intel® HD Graphics embedded in the processor

VGA C

RT, up to 1920 x 1200 pixel at 60Hz

DVI-D(Option) DVI-D, up to 1920 x 1200 pixel at 60Hz(option)

DP (Option) DP, up to 4096 x 2304 pixel at 60Hz(option)

I/O Interface USB 5

USB 3.0

Serial Port 2 COM ports (RS-232), 2 COM ports (RS-232/422/485)

PS/2 1

(PS/2 Y cable supports 1keyboard and 1 mouse)

Ethernet Controller Dual GbE, 10/100/1000 Mbps (LAN 1: Intel i219LM,LAN 2:

ntel i211AT)

Expansion PCIe (

FES7470) 3 PCI / 1 PCIe x16

(FES7471) 1 PCIe x8 / 2 PCIe x4 / 1 PCIe x1

Storage SATA 2

SATA 3.0(600MB/sec)

Power Power Type AT /ATX

Power Supply

Voltage

00-240V AC, 4-2A, 60-50Hz, 250W

Thermal

Dissipation

an base

Environment Operational Temp -20~55° C (-4~131° F)

Non-Operational -30~70° C (-22~158° F)

Vibration Operating : MIL-STD-810G, Method 514.6, Category 4,

common carrier US highway truck vibration exposure

Storage : MIL-STD-810G, Method 514.6, Category 24,

minimum integrity test

Certification Shock Operating : MIL-STD-810G, Method 516.6, Procedure I,

functional shock=20g Storage : MIL-STD-810G, Method

age 4

516.6, Procedure V, crash hazard shock test=75g

EMC CE, FCC, Class A

General Dimensions

(W x H x D)

183.5 x 236.4 x 238.7 mm (7.34” x 9.31” x 9.54”)

Weight 5.22 kg (11.48Ib)

OS Windows 7 Pro, Windows 8.1 Pro, Windows 10, Linux

age 5

1.4 I/O Arrangement

Power Button

USB 3.0

USB 3.0 Ports

GbE LAN Ports

COM 1-2

(RS

232)

VGA Port

PS/2 Port

COM 3-4

(RS232/RS422/485)

(Optional)

PCIe Expansion

Slots for 3 PCI

&1 PCIe x16 or

1 PCIex8 &

2 PCIex4 &

1 PCIex1

DVI-D (Option)

HDD Kit

age 6

Power Button

Press this button to turn on the system.

PS/2 Port

This port can be connected to keyboard or mouse .

VGA Port

1. This CPU card has VGA outputs that can drive conventional CRT displays.

VGA1 is a standard 15-pin D-SUB connector commonly used for VGA.

DVI Port

supporting resolution up to 1920 x 1200.

LAN Port

This port can be connected to the Ethernet via RJ-45 connector .

Power Button

AC POWER

Power Button

age 7

10/100BASE-T:

Pin Definition Pin Definition

1 TX_D0+ 5 NC

2 TX_D0- 6 RX_D1-

3 RX_D1+ 7 NC

4 NC 8 NC

1000BASE-T:

Pin Definition Pin Definition

1 TX_D0+ 5 BI_D2-

2 TX_D0- 6 RX_D1-

3 RX_D1+ 7 BI_D3+

4 BI_D2+ 8 BI_D3-

USB 3.0 Port

Pin Definition

1 +5

2 USB-

3 USB+

age 8

asically, USB3.0 supports 900mA @ 5 V

USB 2.0 Port

Pin Definition

1 +5

2 USB-

3 USB+

4 GND

Each USB2.0 port supports 500mA @ 5 V

COM 1-2 (RS-232 only)

Pin Definition Pin Definition

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI

5 GND

4 GND

5 StdA_SSRX-

6 StdA_SSRX+

7 GND_DRAIN

8 StdA_SSTX-

9 StdA_SSTX+

age 9

COM 3-4 ,COM 7-8 (RS-232/422/485)

(RS-232)

Pin Definition Pin Definition

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI/5V/12V

5 GND

(RS-422)

Pin Definition Pin Definition

1 TX- 6

2 TX+ 7

3 RX+ 8

4 RX- 9 5V/12

5 GND

(RS-485)

Pin Definition Pin Definition

1 D- 6

2 D+ 7

3 8

4 9 5V/12

5 GND

*Comport Setting refer to the "2.6 COM3-4 Setting (RS232/422/485)"

AC Power Input Connector

This System supports AC 110-240V input power voltage.

age 10

1.5 Mechanical Dimension

age 11

age 12

Chapter2. System Setup

2.1 Power Installation Procedure

Step 1. Connect a power cord to the power supply.

AC to DC power adaptor specification

1. Input support voltage: 110V ~ 240V AC power , 50~60Hz

2. Output support voltage: 12V DC power @18A MAX

3. -20~55 degree C operating temperature

Step 2. Connect another male plug of the power cord to an electrical outlet.

age 13

2.2 Installing 2.5" HDD of the Kit

Step 1. Push the dowel in the direction of the arrow,and pull out hdd bracket

age 14

Step 2. Install a HDD and then fasten the 4 M3*5 screws.

Step3. Put in the HDD and lock it

Notice that the bracket supports only 7mm and 9mm HDD/SSD.

Page is loading ...

Acnodes FES7471 User manual

Brand: Acnodes

Model: FES7471

Type: User manual

This manual is also suitable for

FES7470

Download PDF

report

Acnodes FES7471 User manual

This manual is also suitable for

Acnodes FES7471 User manual

Related papers

Other documents