KC HiLiTES 6315 relay wire harness is designed to power two lights, each with a maximum wattage of 130. The harness includes a switch, relay, sheet metal screw, and wire ties for easy installation. The switch can be mounted in a 3/4" hole and the relay should be mounted close to the battery with the blades facing down. Connect the yellow power lead to the positive side of the battery and the black ground lead to the negative side or chassis ground. Finally, connect the white switch power wire to a positive power source.
KC HiLiTES 6315 relay wire harness is designed to power two lights, each with a maximum wattage of 130. The harness includes a switch, relay, sheet metal screw, and wire ties for easy installation. The switch can be mounted in a 3/4" hole and the relay should be mounted close to the battery with the blades facing down. Connect the yellow power lead to the positive side of the battery and the black ground lead to the negative side or chassis ground. Finally, connect the white switch power wire to a positive power source.
KC HiLiTES 6315 relay wire harness is designed to power two lights, each with a maximum wattage of 130. The harness includes a switch, relay, sheet metal screw, and wire ties for easy installation. The switch can be mounted in a 3/4" hole and the relay should be mounted close to the battery with the blades facing down. Connect the yellow power lead to the positive side of the battery and the black ground lead to the negative side or chassis ground. Finally, connect the white switch power wire to a positive power source.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI