2. OPT7 LIGHTING
  3. AURA PRO Truck Bed
AURA PRO Truck Bed

OPT7 LIGHTING AURA PRO Truck Bed Installation guide

  • Hello! I've reviewed the user manual for the AURA PRO Truck Bed Strip. This manual covers installation, usage, and optional features like door/dome light integration. It also provides detail information about components of the kit and usage of OPT7 CONNECT app. I am ready to assist you with your questions.
  • Is the control box waterproof?
    Do I need additional materials for installation?
    What is the purpose of the auxiliary wiring?
COMPONENTS
TRUCK BED STRIP
AURA PRO
TM
INSTALLATION GUIDE
LED LIGHT STRIPS
AURA BLUETOOTH CONTROL BOX MOUNTING KIT
8FT LED STRIP EXTENSIONS POWER HARNESS W/ SWITCH
Y-SPLITTERS
ADHESIVE BOOSTER
CIGARETTE LIGHTER POWER SUPPLY
**Note: Trigger wire for door light is recommended if your dome light
lights up progressively when opening door.
This feature will activate when the aux wiring is connected to the trigger
wire for door light or positive wire of dome light.
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
OE-STYLE SWITCH SETUP
To install the switch, your vehicle
will need an open 1 in x 1.5 in
slot on the dashboard.
STEP 1
Run the rocker switch chosen slot,
then connect the control box.
STEP 2
Use the switch to turn “ON” the
kit using the OE-style switch.
STEP 3
STEP 4
Connect to the control box through
the OPT7 CONNECT App.
AUX WIRING FOR A DOOR/DOME LIGHT
1 in x 1.5 in
You may choose the desire color choice directly on the Aura App.
AUXILIARY
WIRE
EXTENSION
WIRE
AUXILIARY
WIRE
EXTENSION
WIRE
OPTION A
OPTION B
Inspect kit to ensure all contents was included.
STEP 1
Prepare the mounting area by removing all dirt and foreign debris
and applying the included Adhesive Booster.
STEP 2
Decide where to locate the light strips and ensure wiring has enough
length for control box to be installed in desired location.
*The control box is NOT waterproof. Tuck it away from the elements.
STEP 3
(+) (-)
INSTALLATION
Y-SPLITTERS
Y-SPLITTERS
Scan the QR code on the back of
the control box to download the
app.
Optional Features: See second
page for additional steps.
STEP 4
STEP 6
Connect all light strips to the
control box. Secure Control box
in desired location with Velcro.
STEP 5
STEP 7
Secure the light strips using double
sided tape and secure all the wiring
away from the moving components.
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
Heat Shrink Tube
1
2
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
INSTALLATION
Open the “OPT7 Connect” App, pair
your smart phone to the control
box, and pick your desired color!
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
/