Electrolux EIW60000X User manual

Instruction manual

REFRESHMENT CENTER

Built-in appliance

welcome to the world of Electrolux electrolux 3

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which hopefully

will provide you with lots of pleasure in the future.

The Electrolux ambition is to offer a wide variety of quality products that

make your life more comfortable.

You find some examples on the cover in this manual.

Please take a few minutes to study this manual so that you can take

advantage of the benefits of your new machine.

We promise that it will provide a superior User Experience delivering Ease-of-

Mind.

Good luck!

4 electrolux contents

Contents

Built-in appliance............................. 1

Electrical safety............................... 5

Appliance description ........................ 7

Identification plate........................... 8

Technical Characteristics.................... 8

Installation..................................... 9

Package content...................................9

1

Unit positioning................................ 10

2 Frontal spacer installation................... 11

3 Water mains and siphon connection....... 12

4 Install filter cartridge ........................ 13

5 CO2 bottle connection ....................... 13

6 Startup .......................................... 14

Using the Refreshment Center................... 15

Front touch panel.................................. 15

Dispensing ........................................... 15

Alarms ......................................... 16

Maintenance.................................. 19

Sanification + filtration cartridge............... 19

Environment care............................ 22

Electric diagram ............................. 23

Hydraulic diagram ........................... 24

Errata corrige ................................ 25

Guarantee/Customer Service .............. 33

The following symbols are utilized with this manual:

Safety information

Environment

Disposal directives

electrical safety electrolux 5

Electrical safety

This appliance conforms to the following safety electrical European

Directives:

This manual has been written for your own safety and of others.

Please read manual carefully before installation and/or use. Please

keep this instruction manual in a safe and dry place. This appliance

conforms to the following safety electrical European Directives:

2006/95/CE, 2004/108/CE, 98/37/CEE.

Please keep this instruction manual in a safe and dry place.

This manual has been written

for you own safety and of

others. Please read manual

carefully before installation

and/or use.

Electrical safety

The unit needs to be

connected to a power supply

line that conforms fully to

local safety regulations

regarding electrical safety. If

in doubt please have your

electrical system checked by

a specialized electrician.

Please do not try to repair

the unit as you might cause

additional damage. Contact

your nearest Technical

assistance center.

Remove power supply cord

before proceeding with repair

operations.

If the power supply cord

appears to be damaged,

please ask for a replacement

cord.

6 electrolux appliance description

Installation

Please handle appliance with

care to prevent damaging of

the refrigeration circuit.

Avoid prolonged exposure of

the appliance to direct

sunlight.

Please follow instruction

carefully before, during and

after installation.

If the appliance is

transported in vertical

position, please place in

horizontal (normal) position

and wait 1 hour for the oil to

return to the compressor

before turning unit on.

Do not bend water supply and

discharge tube excessively

during installation.

Use

Do not use the Refreshment

Center for something else

other than dispense cold,

carbonated, ambient water

and ice. An incorrect use of

the appliance may harm

people or cause damage to

the appliance itself.

Do not allow children to use

the appliance if not under

the supervision of adults.

Cleaning

Do not use metallic tools to

clean the appliance as it may

cause damage.

Environment

Please follow local disposal

regulations.

appliance description electrolux 7

Appliance description

The Refreshment Center is a

domestic appliance designed to

dispense purified cold, carbonated

and ambient temperature water and

ice-cubes.

The appliance has 2 nozzles from

which the following products can be

dispensed:

- Ambient temperature water

- Cold water

- Carbonated water

- Ice-Cubes.

Units

The unit is mainly composed of:

1 St. Steel front display

2 Filter head

3 Water dispense nozzle

4 Glass touch command panel

5 Ice dispense outlet

6 Drip tray

7 CO

2

bottle

8 H

2

O pressure regulator with

gauge

9 Filter cartridge

10 Power supply socket

11 Main on/off switch

12 H

2

O inlet

13 H

2

O drainage

2 31 4 5 6

7 8 9

13121110

8 electrolux identification plate

Identification plate

Should you need to contact a

technical Assistance Center,

make sure you have the serial

number handy for

identification. The serial

number is on the

identification plate in the side

of the appliance. Extract from

cabinet to identify plate.

MODEL PNC

xxx xxx xxxXXXXXXXX

xxxxxxxx

TYPE

SERIAL No.:

Refreshment Center

MADE IN ITALY

230 V ~ 50 Hz

MAX 190 W

Fig. 2

Technical Characteristics

Power Supply 230-240 V

Frequency 50 Hz

Power consumption 190 W

Cold water dispense capacity 2lt @ 1 l/min.

Carbonated water dispense capacity 2lt @ 1 l/min

Dispense temperature < 13°C

Water mains pressure (water inlet) > 2.0 bar

CO

2

pressure 2.5-4 bar

Filtration 0.5 micron

Filter capacity 2840 litres

Ambient temperature conditions range 18°C-32°C

Unit dimensions L x P x H (mm) 594x554xH378

Weight 38 Kg

Refrigerant gas R134a – 60gr

installation electrolux 9

Installation

Warning

In order for the unit to work

correctly, the Technical

Characteristics specification

chart on page 6 needs to be

observed.

Installation steps:

1. Refreshment Center assembly

inside kitchen

2. Frontal spacer installation

3. Water mains connection

4. Water filter connection

5. CO2 bottle connection

6. Electric power supply

Package content

Open package and immediately check

for any transport damages. During

installation please handle with care.

Inside you should find the following

material:

A. Refreshment Center

B. 2 Sliding Rails

C. Mounting base plate

D. 6 spacers 2x1mm, 2x2mm,

2x3mm

E. Eight 3,5x16mm and three M4x8

screws

Power supply cord

H

2

O inlet flexible hose and

discharge tube

2x

Filtration Cartridge

Sanitazing cartridge and liquid

A

B

C

D

E

8x

3x

10 electrolux installation

1 Unit positioning

Please install unit as far away

as possible from heat sources

Please install unit higher than

the water main in the kitchen

Please don’t install the

Refreshment Center farther

than 4m from the water main

or please use another water

inlet and discharge tubes.

Installing the machine into kitchen

furniture with proper characteristics

will ensure a correct operation of the

equipment.

Complying with the safety rules,

ensure a proper protection against

any contact with the electric

components and with the parts

protected only by functional

insulation, by housing the machine

correctly into the furniture.

All components that guarantee

protection, even a cover panel (for

instance, when the machine is

positioned at one of the ends of the

modular furniture), should be firmly

fixed so that they cannot be removed

without tools.

Install this machine at a certain

distance from refrigerators or

freezers, because the heat it emits

can impair their functioning.

- The dimension requirements for

the kitchen cabinet are:

1.

Height(1):380mm

2.

Depth(2):560mm

3.

Width(3):560mm

5

4

0

5

0

1

2

3

50

- Install the mounting base plate

inside the kitchen cabinet after

checking after checking

dimension requirements as shown

in Fig. 3. If necessary, please use

the spacers to fix the mounting

base plate to the cabinet (Fig.

4).

Fig. 3

Fig. 4

installation electrolux 11

Please be sure that the

frontal edge of the mounting

base plate and the frontal

edge of the piece of

furniture are coincident

- Mount the 2 sliding rails onto the

base plate already placed in the

cabinet, using the eight

3,5x16mm self-threading screws

supplied.

- Place the Refreshment Center on

the sliding rails. Slide the

machine into the cabinet until

the “click” indicates that it is

locked into position.

2 Frontal spacer installation

When installing the Refreshment

Center near to other appliances, the

height of the other appliances (for

example an oven) could be 10mm

higher. To align the Refreshment

Center frontal panel to the others,

please fix the frontal spacer part to

the frontal panel using the nr.3 M4x8

screws as in figure below:

Fig. 5

Fig. 6

12 electrolux installation

3 Water mains and siphon connection

Warning

Connect only to potable

water mains.

All water mains connections

should be carried out by a

certified plummer.

Warning

Water mains pressure can be

set through the H

2

O pressure

regulator placed near the

CO

2

bottle. Please set it

after dispensing of at least

500cc of carbonated water.

Pressure should be lower

than 3.0 bars and higher than

2.0 bars.

Complete following operations (Fig.

8):

- Connect the flexible hose to the

H

2

O inlet (Fig.7) on the unit.

Connect water mains to flexible

hose.

- Connect discharge tube to

discharge barbed connection on

unit and to sink siphon (Fig.7).

Warning

Please do not install

Refreshment Center farther

than 4 meters or please get

longer inlet and discharge

tubes.

Water Inlet 3/4”

Water discharge 3/4”

Fig. 7

2x

installation electrolux 13

4 Install filter cartridge

Lift locking spring placed under drip

tray (Fig. 8).

Fig. 8

Pull unit from cabinet (Fig. 9). On the

left side of the unit please find the

filter cartridge (Fig. 1a).

Fig. 9

Remove filter plastic cap and install

filter in filter head as shown on filter

instruction booklet (Fig. 11).

Fig. 10

Check for water leaks.

5 CO2 bottle connection

Make sure the CO

2

bottle is tightly

fixed on the CO

2

pressure regulator.

Fig. 11

Open the pressure regulator valve and

set pressure to 3 bars on gauge (Fig.

12). Pressure can be increased to 4

bars to increase carbonation levels.

Fig. 12

14 electrolux installation

6 Startup

Warning

Before plugging unit to

power supply, please check

for correct power supply

voltage and frequency as

stated on Technical

Characteristics chart (see

page 8).

Fig. 13

Connect unit to 230V through

supplied cord (Fig. 13).

Electric supply circuit should conform

to local laws and regulations.

Warning

The supplier declines any

responsibility should any

safety rule not be respected

during installation.

Turn unit on through main on/off

switch on side of unit (Fig. 14). The

unit will undergo an initialization

process which will take approx. 4

minutes.

This preliminary operation will be

carried out every time the unit is

turned off and on through the main

on/off switch inside the cabinet.

During this process the touch control

panel is inactive.

After 4 minutes it’s possible to turn

unit on through on/off button on

touch control panel to activate all

functions.

At this point please wait approx.

2 hours before the unit reaches final

working temperatures in order to

dispense cold water, carbonated

water and ice-cubes. Ambient water

is ready immediately.

Fig. 14

installation electrolux 15

Using the Refreshment Center

Front touch panel

1 Empty CO

2

bottle led

2 On/Off switch

3 Water ambient temperature

button

4 Carbonated water button

5 Cold water button

6 Ice dispense button

7 Light button On/Off

8 Exhaust filter led

Dispensing

After turning appliance on through

on/off switch on touch screen, wait

for cooling time before dispensing.

Place a glass under dispense nozzle.

Press button corresponding to desired

selection. Release until desired

dispense water level or number of ice-

cubes is reached. If you experience

CO

2

exhaust from nozzle, please wait

20 secons and restart dispensing

carbonated water.

1 2 3 4 5 6 7 8

16 electrolux alarms

Dispensing is signaled by the

corresponding led.

In order to dispense in bottles or

carafes, please extract dispense

nozzle by grabbing on sides of nozzle

and pulling forward.

Alarms

Led indications Message

Led blinks slowly

Filter is about to exhaust. 2800 liters have

been dispensed.

Please change filter as described in the

following chapters.

Led is lit

Filter is about to exhaust. 2900 liters have

been dispensed. Please change filter as

described in the following chapters.

Led is lit

All dispense buttons disabled.

3000 liters have been reached.

Please change filter as described in the

following chapters.

alarms electrolux 17

Carbonated

water led blinks

slowly

Carbonated water is disabled.

Protection on carbonation pump activated.

To reset status please turn unit off/on on

touch control panel after waiting for a while.

CO

2

bottle led on

Carbonated water is disabled.

CO

2

bottle is empty.

Replace CO

2

bottle to restore carbonated

water dispensing.

Please change CO

2

bottle as described in the

following chapters.

Leds

- ambient water

- ice

blink

simultaneously

Ice forming bin block alarm.

Restart unit through main on/off switch on side of unit

(Fig. 1b).

Leds

- ambient water

- cold water

- carbonated

water

blink

simultaneously

Volumetric turbine alarm. Two possible causes:

1. No water supply to unit

2. There’s water supplied to unit (dispensing

enabled) but volumetric turbine malfunction.

For the first case verify the presence of water supplied to

unit.

For the second case restart unit through on/off switch on

touch panel.

Leds

- carbonated

water

- ambient water

- cold water

- ice

blink

simultaneously

Main water tank fill alarm. Please check water supply to

unit. To reset status restart unit through main switch inside

cabinet (Fig 1b).

18 electrolux maintenance

All leds on

simultaneously

All dispense buttons disabled. 2 main causes:

1. Water present on base of unit. Possible leak.

2. Water level too high inside water tank. Water discharge

blocked.

For the first case switch off and dry the base of the unit.

For the second case restart unit through main switch inside

cabinet.

Should alarms repeat

themselves after all restart

attempts, please call service

assistance.

maintenance electrolux 19

Maintenance

Before any maintenance or

cleaning procedure, please

switch off the appliance and

disconnect it from main by

unplugging the power plug.

CO

2

bottle replacement

When the CO

2

led turns on, it’s

necessary to replace the CO

2

bottle

as described below:

1. Lift locking spring placed under drip

tray (Fig. 8).

2. Pull appliance from cabinet

(Fig. 15).

3. Grab the CO

2

bottle (Fig. 1a) and

extract it from it’s locking clip.

4. By holding the bottle fixed, turn

the pressure regulator clockwise to

remove from the bottle (Fig. 16).

Fig. 15

Fig. 16

5. Place new bottle under the

regulator and screw counter

clockwise till fully tightened (Fig.

17).

6. Lock bottle in place and pull the

unit into the cabinet.

Fig. 17

Sanification + filtration cartridge

When the exhaust filter led turns on, it is time to replace the filter cartridge:

20 electrolux maintenance

7. Lift locking spring placed under drip

tray (Fig. 8). Pull appliance from

cabinet

(Fig. 15).

8. Turn unit off through main on/off

switch (Fig. 1b).

9. Remove the filter cartridge form its

housing by rotating anti clock-wise

about a quarter turn (Fig. 18). This will

free the filter. Pull downward and

remove it paying attention to avoid water

leaks.

Fig. 18

10. Fill sanitizing cartridge with Neutral

Detergent. Insert the sanitizing

cartridge on the filter head by rotating

clock-wise a quarter turn (Fig. 19).

11. Dry any water from the base, that

could have leaked during this

operation.

12. Position under the water dispense

nozzle a container or large cup.

13. Turn on the appliance through the main

switch (Fig. 1b) while pressing the

“light” button for 3 seconds. This starts

the sanitizing mode. This will be shown

in the display as a moving red led

through all the buttons. During this

operation, the inside of the unit will be

sanitized. After this initial cleaning

cycle, the unit will dispense

automatically some cold and ambient

water mixed with sanitizing product.

Fig. 19

Page is loading ...

Electrolux EIW60000X User manual

Related papers

Other documents