welcome to the world of Electrolux electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully
will provide you with lots of pleasure in the future.
The Electrolux ambition is to offer a wide variety of quality products that
make your life more comfortable.
You find some examples on the cover in this manual.
Please take a few minutes to study this manual so that you can take
advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering Ease-of-
Mind.
Good luck!
4 electrolux contents
Contents
Electrical safety ........................5
Electrical safety ....................5
Installation........................... 6
Use .................................... 6
Cleaning..............................6
Environment.........................6
Appliance description..................7
Units ..................................7
Identification plate (Fig. 2)...........8
Technical Characteristics .............8
Installation ..............................9
Installation steps: ..................9
Package content ....................9
1 Unit positioning .................9
2 Water mains and siphon
connection ..................... 10
3 Install filter cartridge ........ 11
4 Startup ......................... 12
Using the Refreshment Unit..... 13
Front touch panel................. 13
Dispensing.......................... 13
Alarms .................................. 14
Maintenance........................... 16
CO
2
bottle replacemen .......... 16
Sanification + filtration cartridge17
Environment care..................... 19
Electric diagram ...................... 20
Hydraulic diagram .................... 21
Guarantee/Customer Service....... 22
The following symbols are utilized with this manual:
Safety information
Environment
Disposal directives
electrical safety electrolux 5
Electrical safety
This appliance conforms to the following safety electrical European
Directives:
This manual has been written for your own safety and of others.
Please read manual carefully before installation and/or use. Please
keep this instruction manual in a safe and dry place. This appliance
conforms to the following safety electrical European Directives:
73/23/CEE, 89/336/CEE, 92/31/CEE, 98/37/CEE.
Please keep this instruction manual in a safe and dry place.
This manual has been written
for you own safety and of
others. Please read manual
carefully before installation
and/or use.
Electrical safety
The unit needs to be
connected to a power supply
line that conforms fully to
local safety regulations
regarding electrical safety. If
in doubt please have your
electrical system checked by
a specialized electrician.
Please do not try to repair
the unit as you might cause
additional damage. Contact
your nearest Technical
assistance center.
Remove power supply cord
before proceeding with repair
operations.
If the power supply cord
appears to be damaged,
please ask for a replacement
cord.
6 electrolux appliance description
Installation
Please handle appliance with
care to prevent damaging of
the refrigeration circuit.
Avoid prolonged exposure of
the appliance to direct
sunlight.
To guarantee maximum
stability and safety, it’s
necessary to install the built-
in appliance only in AEG, REX
and Electrolux sized cabinets.
Please follow instruction
carefully before, during and
after installation.
If the appliance is
transported in vertical
position, please place in
horizontal (normal) position
and wait 1 hour for the oil to
return to the compressor
before turning unit on.
Do not bend water supply and
discharge tube excessively
during installation.
Use
Do not use the Refreshment
Unit for something else other
than dispense cold,
carbonated, ambient water
and ice. An incorrect use of
the appliance may harm
people or cause damage to
the appliance itself.
Do not allow children to use
the appliance if not under
the supervision of adults.
Cleaning
Do not use metallic tools to
clean the appliance as it may
cause damage.
Environment
Please follow local disposal
regulations.
appliance description electrolux 7
Appliance description
The Refreshment Unit is a domestic
appliance designed to dispense
purified cold, carbonated and
ambient temperature water and ice-
cubes.
The appliance has 2 outlet from
which the following products can be
dispensed:
- Ambient temperature water
- Cold water
- Carbonated water
- Ice-Cubes.
Units
The unit is mainly composed of:
1 St. Steel front display
2 Filter head
3 Water dispense nozzle
4 Glass touch command panel
5 Ice dispense outlet
6 Drip tray
7 CO
2
bottle
8 H
2
O pressure regulator with
gauge
9 Filter cartridge
10 Power supply socket
11 Main on/off switch
12 H
2
O inlet
13 H
2
O drainage
2 31 4 5 6
7 8 9
13121110
8 electrolux identification plate
Identification plate (Fig. 2)
Should you need to contact a
technical Assistance Center,
make sure you have the serial
number handy for
identification. The serial
number is on the
identification plate in the side
of the appliance. Extract from
cabinet to identify plate.
MODEL PNC
xxx xxx xxxXXXXXXXX
xxxxxxxx
TYPE
SERIAL No.:
Refreshment Center
MADE IN ITALY
230V~50Hz
MAX 190 W
Fig. 2
Technical Characteristics
Power Supply 230-240 V
Frequency 50 Hz
Power consumption 190 W
Cold water dispense capacity 2lt @ 1 l/min.
Carbonated water dispensecapacity 2lt @ 1 l/min
Dispense temperature < 13°C
Water mains pressure (water inlet) > 2.0 bar
CO
2
pressure 2.5-4 bar
Filtration 0.5 micron
Filter capacity 3000 litres
Ambient temperature conditions range 18°C-32°C
Unit dimensions L x P x H (mm) 594x530xH378
Weight 38 Kg
Refrigerant gas R134a – 60gr
installation electrolux 9
Installation
Warning
In order for the unit to work
correctly, the Technical
Characteristics specification
chart on page 6 needs to be
observed.
Installation steps:
1. Refreshment unit assembly inside
kitchen
2. Water mains connection
3. Water filter connection
4. Electric power supply
Package content
Open package and immediately check
for any transport damages. During
installation please handle with care.
Inside you should find the following
material:
A. Refreshment Center
B. 2 Sliding Rails
C. Mounting base plate
D. 6 spacers 2x1mm, 2x2mm,
2x3mm
Power supply cord
H
2
O inlet flexible hose and
discharge tube
Filtration Cartridge
Sanitazing cartridge and liquid
1 Unit positioning
Please install unit as far away
as possible from heat sources
- Install the mounting base plate
inside the kitchen cabinet after
checking after checking
dimension requirements as shown
in Fig. 4.
- Mount the 2 sliding rails onto the
base plate.
- Place the Refreshment Center on
the sliding rails.
A
B
C
D
10 electrolux installation
Fig. 4
2 Water mains and siphon connection
Warning
Connect only to potable
water mains.
All water mains connections
should be carried out by a
certified plummer.
Warning
Water mains pressure can be
set through the H
2
O pressure
regulator placed near the
CO
2
bottle. Pressure should
be no higher than 3.0 bars
and no lower than 2.0 bars.
Complete following operations (Fig.
5):
- Connect the flexible hose to the
H
2
O inlet on the unit. Connect
water mains to flexible hose.
- Connect discharge tube to
discharge barbed connection on
unit and to sink siphon.
Fig. 5
360
564
580
installation electrolux 11
3 Install filter cartridge
Lift locking spring placed under drip
tray (Fig. 5a).
Fig. 5a
Pull unit from cabinet.
On the left side of the unit please find
the filter cartridge (Fig. 6).
Fig. 6
Remove filter plastic cap and install
filter in filter head as shown on filter
instruction booklet (Fig. 7).
Fig. 7
Verify the on/off valve near the
reducer is closed
Check for water leaks and make sure
the CO
2
bottle is tightly fixed on the
CO
2
pressure regulator.
Open the pressure regulator valve and
set pressure to 3 bars on gauge.
Pressure can be increased to 4 bars to
increase carbonation levels (Fig. 9).
Fig. 9
Filter cartridge
12 electrolux installation
4 Startup
Warning
Before plugging unit to
power supply, please check
for correct power supply
voltage and frequency as
stated on Technical
Characteristic chart (see
page 6).
Fig. 10
Connect unit to 230V through
supplied cord.
Electric supply circuit should conform
to local laws and regulations.
Warning
The supplier declines any
responsibility should any
safety rule not be respected
during installation.
Turn unit on through main on/off
switch on side of unit. The unit will
undergo an initialization process
which will take approx. 4 minutes.
This preliminary operation will be
carried out every time the unit is
turned off and on through the main
on/off switch inside the cabinet.
During this process the touch control
panel is inactive.
After 4 minutes turn unit on through
on/off button on touch control panel
to activate all functions.
At this point please wait approx.
3 hours before the unit reaches final
working temperatures in order to
dispense cold water, carbonated
water and ice-cubes. Ambient water
is readily immediately.
installation electrolux 13
Using the Refreshment Unit
Front touch panel
1 Empty CO
2
bottle led
2 On/Off switch
3 Water ambient temperature
button
4 Carbonated water button
5 Cold water button
6 Ice dispense button
7 Light button On/Off
8 Exhaust filter led
Dispensing
After turning appliance on through
on/off switch on touch screen, wait
for cooling time before dispensing.
Place a glass under dispense nozzle.
Press button corresponding to desired
selection. Release until desired
dispense water level or number of ice-
cubes is reached. Please do not
dispense more than 1 liter of
carbonated water continuously since
you might experience CO
2
exhaust
from nozzle. Should that occur,
please wait
1 minute and restart dispensing
carbonated water.
1 2 3 4 5 6 7 8
14 electrolux alarms
Dispensing is signalled by the
corresponding led.
In order to dispense in bottles or
carafes, please extract dispense
nozzle by grabbing on sides of nozzle
and pulling forward.
Alarms
Led indications Message
Led blinks slowly
Filter is about to exhaust. 2900 liters have
been dispensed.
Please change filter as described in the
following chapters.
Led is lit
Filter is about to exhaust. 2980 liters have
been dispensed. Please change filter as
described in the following chapters.
Led is lit
All dispense buttons disabled.
3000 liters have been reached.
Please change filter as described in the
following chapters.
alarms electrolux 15
Carbonated
water led blinks
slowly
Carbonated water is disabled.
Time-out protection on carbonation pump
activated.
To reset status please turn unit off/on on
touch control panel.
CO
2
bottle led on
Carbonated water is disabled.
CO
2
bottle is empty.
Replace CO
2
bottle to restore Carbonated
water dispensing.
Please change CO
2
bottle as described in the
following chapters.
Leds
- ambient water
- ice
blink
simultaneously
Ice forming bin blocked.
Turn unit on/off through main on/off switch on side of
unit.
Leds
- ambient water
- cold water
- carbonated
water
blink
simultaneously
Volumetric turbine malfunctioning. Dispense functions
enabled but during dispense operation the 3 leds will blink.
Leds
- carbonated
water
- ambient water
- cold water
- ice
blink
simultaneously
Main water tank fill time-out. Please check water supply to
unit. Make sure filter shut off valve to be open.
To reset status turn unit on/off through main switch inside
cabinet.
16 electrolux maintenance
All leds on
simultaneously
All dispense buttons disabled. 2 main causes:
1. Water present on base of unit. Possible leak.
2. Water level too high inside water tank. Water discharge
blocked.
For the first case switch off and dry the base of the unit.
For the second case turn unit on/off through main switch
inside cabinet.
Should alarms repeat
themselves after all restart
attempts, please call service
assistance.
Maintenance
Before any maintenance or
cleaning procedure, please
switch off the appliance and
disconnect it from main by
unplugging the power plug.
CO
2
bottle replacement
When the CO
2
led turns on, it’s
necessary to replace the CO
2
bottle
as described below:
1. Pull appliance from cabinet
(A-Fig. 12).
2. Grab the CO
2
bottle and extract it
from it’s locking clip.
3. By holding the bottle fixed, turn
the pressure regulator clockwise to
remove from the bottle (fig. 13).
Fig. 12
maintenance electrolux 17
4. Place new bottle under the
regulator and screw counter
clockwise till fully tightened.
5. Lock bottle in place and close
cabinet.
Fig. 13
Sanification + filtration cartridge
When the exhaust filter led turns on, it is time to replace the filter cartridge:
1. Turn unit off through main on/off
switch (Fig. 11).
2. Pull unit from cabinet (Fig. 5a) and look
for two shot off valves on the base of
the unit under the CO
2
cylinder.
3. Close valve (Fig. 14).
4. Unwind the wrapped tube to a
container or glass and open valve 1 to
relieve filter pressure (Fig. 14a). This
operation will ease the filter cartridge
removing operation.
5. Remove the filter cartridge form its
housing by rotating counter clock-wise
about a quarter turn (Fig. 15). This will
free the filter. Pull downward and
remove it.
6. Fill sanitizing cartridge with 300cc of
Neutal Detergent. Insert the sanitizing
cartridge on the filter head by rotating
clock-wise a quarter turn.
7. Open valve near the water pressure
reducer (Fig. 8).
8. Dry any water from the base, that
could have leaked during this
operation.
9. Position under the water dispense
nozzle a container or large cup.
10. Turn main switch. Wait approx.
5 seconds and press “light” button until
18 electrolux maintenance
sanitizing mode is entered. This will be
shown in the display as a moving red
led through all the buttons. During this
operation, the inside of the unit will be
sanitized. After this initial cleaning
cycle, the unit will dispense
automatically some cold and ambient
water.
11. Shut off unit from main on/off switch.
12. Close valve on base if unit (Fig. 14).
13. Position under the water dispense
nozzle a container and dispense water
to empty sanitize cartridge and tubes
14. Install new filter cartridge as shown on
filter cartridge instructions (Fig. 7).
15. Wait 4 minutes before turning unit on
through the touch button.
16. Dispense 1 liter of cold, ambient and
carbonated water to fully rinse any
sanitizing residue.
Fig. 15
The following is a troubleshooting
section for malfunctions that are not
in the Alarms list above:
SYMPTOM PROBABLE CAUSE RESOLUTION
No power supply Check electric
power supply
Water is not dispensed
Water mains inlet
solenoid valve
failure
Call technical
assistance
Probabile
refrigerant ga leak
Call technical
assistance
Motor fan failure Call technical
assistance
The unit has been on for
over 3 hours, but no cold
water nor ice is available
Compressor failure Call technical
assistance
enviromnet care electrolux 19
Brand new
appliance
Utilize for few days
and check
carbonation
Low CO
2
pressure Increase CO
2
pressure by rotating
knob on CO
2
pressure regulator
clock-wise
Low carbonation level
Air inside
carbonator
Dispense few litres
of carbonated water
and check
carbonation
Cold water occasionally
sprays CO
2
gas
Non return valve on
carbonator dirty
Call technical
assistance
Warning
All repairs should be carried
out by authorized
technicians.
Environment care
The symbol on the product or
on its packaging indicates that this
product may not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed
information about recycling of this
product, please contact your local
city office, your household waste
disposal service or the shop where
you purchased the product.
20 electrolux electric diagram
Electric diagram
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Aeg-Electrolux PWE9039-M User manual
-
-
-
-
AEG Electrolux PWE9038-M User manual
-
Electrolux EIW60000X User manual
-
-
Electrolux EIW60002X User manual
-
-