Electrolux EID60010X User manual

User Instructions

4 SPRINGS WATER CHILLER

Undersink installation

electrolux 3

Dear customer,

thank you for choosing an Electrolux appliance. Thanks to its high quality,

performances and reliability this appliance will make your everyday life

comfortable, easy and safe.

When designing our products we use the most updated technology, but we

always respect the environment and the laws in force.

Over 90% of our appliances are environmentally friendly classified as A, A+,

and A++ and they are recommended by WWF.

Please read this instruction manual carefully, it describes the correct and

safe use of your appliance and suggests the most efficient maintenance.

4 electrolux electrical safety

Contents

Undersink installation............................ 1

Safety instructions .......................... 5

Electrical safety .............................. 5

During installation............................ 6

During use...................................... 7

For cleaning ................................... 7

Safeguarding the environment ............. 7

Appliance description....................... 8

Parti ............................................ 8

Identification plate ......................... 9

Technical specifications.................... 9

Installation ..................................10

Fasi di installazione: ....................... 10

Package content ............................ 10

Positioning of the water cooler in the

undersink compartment ....................... 11

Connecting to water supply................... 12

Installation of dispensing tap................. 13

Installation of filter cartridge and Co2 Bottle15

Disposable bottle ........................... 15

Electrical connection and first starting.16

How to dispense water ....................17

Water dispensing ............................... 18

Alarms........................................19

Maintenance and cleaning ................20

CO2 bottle replacement (for food) ...... 20

Filter cartridge replacement ............. 21

Cleaning and disinfecting procedure .... 22

Litres counter reset ........................ 22

Troubleshooting ............................24

Environmental protection.................25

Prolonged disuse ...........................25

Schema elettrico ...........................26

Schema idraulico ...........................27

Guarantee/Customer Service ............28

safety instructions electrolux 5

The following symbols are utilized with this manual:

Information on safety

Protecting the environment

Do not throw away in non-differentiated urban waste

Safety instructions

This appliance complies with the safety and health requirements of the

following EC Directives:

2006/95/CE Low voltage

2004/108/CE Electromagnetic compatibility

98/37/CE Machine Directive.

Please keep this manual in a safe place, far from damaging agents and close

to the appliance for consultation purposes.

These instructions aim at

guaranteeing safety to you

and to the other users.

Please read them carefully

before installing and starting

the appliance.

Electrical safety

To start the appliance

connect the supplied plug to

an electrical socket.

Household electrical system

must comply with all safety

laws and regulations in force.

If you are not sure your

system does, have it checked

by a specialized electrician.

6 electrolux electrical safety

In case of fault, never try to

repair the appliance on your

own; contact the nearest

technical assistance centre

to request the intervention of

a technician. If carried out by

non-qualified people, repairs

can cause damages.

Unplug the appliance before

any cleaning or maintenance

operation.

If the power cable is

damaged, replace it with a

new one to be requested

from the dealer or from an

authorized technical

assistance centre.

During installation

Take particular care during

handling, so as not to damage

parts of the refrigeration

circuit and thus avoid

possible gas leaks.

Avoid any prolonged exposure

to the sun.

Carry out installation and

connection, carefully

following the instructions

contained in this handbook.

If the appliance is

transported in the horizontal

position, the oil contained in

the compressor may flow into

the refrigerant circuit.

Therefore, leave it in the

upright position for at least

2 hours before starting it, in

order to allow the oil to flow

back into the compressor.

Do not bend the pipes

excessively during appliance

installation.

descrizione dell’apparecchio electrolux 7

During use

Only use the 4 Springs for its

intended purpose, i.e. for

dispensing carbonated or

non-carbonated water.

Improper use of the

appliance can compromise its

correct operation and cause

harm to the health of people.

The appliance is not to be

used by children or persons

with reduced physical,

sensory or mental

capabilities, or lack of

experience and knowledge,

unless they have been given

supervision or instruction.

For cleaning

Never use metal objects to

clean the appliance, as they

could damage the surfaces.

Safeguarding the environment

When scrapping the

appliance, correctly dispose

of it in compliance with

current regulations and

according to the recyclable

materials present and marked

with the special symbol.

8 electrolux appliance description

Appliance description

The 4 Springs appliance is a device

for domestic use, for chilling,

treating and carbonating mains

water.

The appliance is provided with a tap

to be installed on the sink, for

dispensing:

- Cold water

- Carbonated cold water

- Cold and hot water from the

mains.

13

1

2

9

8

10

7

A

3

14

4

15

5

6

B

Fig. 1

Parts

The main parts of the 4 Springs water chiller are:

1. Plug

2. Connection fittings

3. Temperature regulating device

4. LED Panel

5. Starting button

6. Electric socket

7. CO2 Bottle

8. CO2 pressure reducer

9. Filter door

10. Tap

11. Installation kit

12. Cleaning and disinfecting

cartridge

13. Carbonator access knob

14. Bushing with fiber optic

15. Reset button

12

11

technical characteristics electrolux 9

Identification plate

If the appliance does not work

properly and you cannot solve

the problem, please contact

the closest Technical

Assistance centre.

You will be asked to give the

data and the characteristics of

the appliance, to be found in

the identification plate on the

frontal panel.

Fig. 2

Technical specifications

Power supply voltage

230 V

Frequency

50 Hz

A

bsorbed power

190 W

Litres of water dispensed

15 litres/h

Dispensing temperature

< 13°C

W

ater supply pressure (water inlet)

> 2.0 bar

Carbonator CO

2

inlet pressure

2.5 - 4 bar

Filter cartridge

0.5 micron

Filtering capacity

2840 litres

Operating temperature

18°C - 32°C

Overall dimensions L x D x H

227 x 450 x 378 mm

W

eight

29 kg

Refrigerant gas

140g -R134a

10 electrolux installazione

Installation

Installation phases:

1. Positioning of the water cooler

in the undersink compartment;

2. Water connection;

3. Dispensing tap installaton

4. Filter cartridge and Co2 bottle

installation;

5. Power connection.

Package content

Unpack the appliance and check for

any damages occurred during

transportation. Move it carefully

avoiding falls or collisions that may

damage the refrigeration circuit.

The package contains the following

material:

4Spring water cooler

Dispensing tap

A

B

Power cable

Filter cartridge

Cleaning and disinfecting cartridge

and liquid

Pipes installation kit

Attenzione

The correct functioning of the

cooler depends on a perfect

installation. Good air flow in

the cabinet is fundamental.

All data about power supply

and water connection must

comply with the technical

specifications chart.

installazione electrolux 11

Positioning of the water cooler

in the undersink compartment

Place the cooler far from

heat sources in a

compartment with

sufficient air flow

- This appliance needs free space

in the back.

- Leave at least 5 cm clearance on

the sides. We advice you to leave

more space around the filter

door for filter replacement

purposes. (Fig. 3)

Fig. 3

12 electrolux installazione

Connection to water supply

Fig. 4

Mod. A Mod. B

Fig. 5

Check the presence of the following

in the undersink compartment:

an intercepting tap for cold and hot

water line.

The lack of the above mentioned

items makes the connection

impossible. Please have your system

checked by a plumber installer.

Take the installation kit for water

supply and carry out the connection

as explained:

1. Replace hot water and cold

water flexible pipes with the

supplied kit (Fig. 4).

2. Connect the inlet pipe (H2O IN)

to the cold water union “T”;

3. Connect the dispensing tap to

the COLD H2O OUT pipe coming

out of the appliance;

4. Connect the dispensing tap to

the SODA OUT pipe coming out

of the appliance.

Warning

Only connect to cold

potable water supply

Hot water

H2O IN

Warning

Cold water

H2O pressure must be

between 2.0 and 3.5 bar.

In case of higher pressure,

a pressure reducer must

be installed by a plumber

installer.

primo avviamento electrolux 13

Installation of dispensing tap

Model A

The dispensing tap must be installed on

the edge of the sink or on the kitchen

top using the fixing ring or the pre-

drilled base plate fixed with screws

(Fig. 6).

Fig. 6

x

14 electrolux installazione

Model B

The dispensing tap must be installed on

the edge of the sink or on the kitchen top

using the fixing ring (Fig. 7).

Fig. 7

primo avviamento electrolux 15

Installation of filter cartridge and Co2 Bottle

Open the filter cartridge access door as

shown in Fig.8, undoing the 2 fixing

screws and pulling the panel towards

the left, to remove the hooks from the

fixed structure

Fig.8

Remove the cap and connect the filter

cartridge to the head rotating it

counter-clockwise (Fig. 9).

In case of water leaks, dry the whole

area with a cloth.

Fig. 9

Disposable bottle

Co2 bottle is on the left side of the

appliance. Remove the green cap and

screw the pressure reducer onto the

bottle. Make sure the Co2 bottle is

properly screwed (Fig. 10).

Open the valve on the reducer until

reaching a pressure of approx. 3 bar.

Pressure can be adjusted up to a max.

of approx. 4 bar to obtain a higher

carbonation level. To reach a good

carbonation level, it is necessary for

CO2 pressure to be =.5 bar higher than

water pressure.

Close the side door tightening its

screws.

Fig. 10

16 electrolux installazione

Electrical connection and first starting

Warning

Before plugging in the

appliance, make sure the

system voltage and

frequency match those on

the identification plate and

in the technical

specifications table.

Fig. 11

Only connect the appliance to a 230

V AC socket using the supplied plug.

The electrical system must comply

with all safety regulations in force.

Warning

The manufacturing company

declines any responsibility if

safety regulations are not

respected.

- Press the start button on the

front of the cooler;

- Set the thermostat on MAX cold

(Fig. 12);

- Rotate the tap left knob

clockwise to dispense flat (non-

carbonated) water and keep it

open for about 3 minutes to clear

the filter;

- 4Springs is now ready to use.

Fig. 12

installation electrolux 17

How to dispense water

fredda frizzante

fredda piatta

fredda

chiuso

aperto

calda

Mod.A

Fig.13

1 2 3

1 Knob for cold flat water

2 Water from the mains

dispensing konb

3 knob for cold sparkling water

e

Mod.B

Fig.14

18 electrolux primo avviamento

Water dispensing

Warning

In case of sudden lack of

water from the mains or low

water pressure while the

carbonating pump is working,

after 4 minutes the pump

protection device is activated

(see alarms)

Warning

If sparkling water tap is left

open to let water flow (i.e.

to fill a carafe), the water

flow can become irregular.

To prevent that from

happening and to avoid

emptying the Co2 bottle,

close the tap for about 20

secs then open again.

manutenzione electrolux 19

Alarms

Indicator lights Message

Fixed yellow

light

The filter is becoming depleted,

2400 litres of water have been

dispensed. Refer to the instructions for

replacing the filter cartridge on the

next page.

Fixed yellow and

red leds

Time to change the filter, 2,800 litres

of water have been dispensed. See

filter cartridge replacement

instructions.

Yellow and red

led blink

together

Dispensing is deactivated, 2,840 litres

have been dispensed. Replace the filter

to reactivate water dispensing. See

filter cartridge replacement

instructions.

Red led flashes

Dispensing is deactivated. The anti-

flooding device is on. To reactivate the

appliance remove the water and dry

the bottom. Switch the appliance off

and then back on.

Yellow led

flashes slowly

Dispensing is deactivated. Pump

protection device is on. To reactivate

the appliance switch it off and then

back on.

Yellow led

flashes fast

Lack of water from the mains. To

eliminate the alarm switch the

appliance off and then back on.

20 electrolux allarmi

Maintenance and cleaning

Before any cleaning or

maintenance operation,

switch off and unplug the

appliance.

CO2 bottle replacement (for food)

When dispensed carbonated water becomes flat, it is time to replace the CO2

bottle as described below :

1. Access the undersink compartment.

2. Locate the bottle on the front of

the appliance. (Fig.15)

Fig. 15

3. Remove the bottle from the

compartment.

4. Holding the pressure reducer with

the left hand, rotate the bottle

clockwise (Fig. 16) to separate it

from the pressure reducer.

5. Screw down the new bottle onto

the reducer rotating it counter-

clockwise.

Fig. 16

6. Place the new bottle in the original

position on the front of the

appliance.

Page is loading ...

Electrolux EID60010X User manual

Electrolux EID60010X User manual

Related papers

Other documents