2. JasonL
  3. DBQA2412.W

JasonL DBQA2412.W, DBQA3012.W, DBQA3612.W Operating instructions

  • Hello! I have reviewed the assembly instructions for the jason.l Quadro A leg Dry Bar frame. This document provides detailed steps for assembling the frame, including how to attach the plastic brackets, adjust the beams and connect the table tops. I am here to help you with any questions you might have regarding this assembly process.
  • What tools are needed for assembly?
    How many people are needed for installation?
    What are the available sizes?
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
Page 1 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Sizes:
2400L x 1200W mm
3000L x 1200W mm
3600L x 1200W mm
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
Table top x2
Leg Quadro A x2
Intermediate Leg Quadro A x1
Upper beam x2
Lower beam x2
Plastic bracket x8
Feets or Wheels x6
A
B
C
D
E
F
G
Allen keyL
M8x20MM CSK x12
M8x20MM socket head x4
M6x20MM socket head x8
M6x30MM socket head x8
H
I
J
K
COMPONENTS
SCREWS
Page 2 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
G
A
H I J K
E
D
B
C
**
If you purchase with wheels option
Colour of the beam is always black, regardless desk frame colour.
*
**
*
**
I
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
STEP 01
Using Allen Key provided, attach 2 plastic brackets (F) per exterior leg (B) (as
per picture above) using M6x20MM (J) Socket head screw. Attach 4 plastic
brackets (F) to the Intermediate leg (C) using M6x20MM (J).
Screw the feets or wheels (if you purchase with wheels option) (G) to the
bottom of each Leg.
STEP 02
Page 3 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
Using Allen Key provided, attach M8x20MM Socket head (I)-
screw socket half way into legs.
G
B
C
F
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
Page 4 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
STEP 03
Adjust extendable beams (D) to desired
length using markers and secure beams
at that length using screws provided.
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
E
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
STEP 04
Adjust extendable beams (E) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beams
Page 5 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
2
2
2
4
1
1
1
3
3
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
STEP 05
TOP VIEW
STEP 06
Page 6 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
D
H
Attach Upper Beams (D) to legs using nut insert.
See point attached
Frame looks like this. Using Allen Key, attach Upper Beams (D)
with Sockets (H).
D
Using Allen Key. Tighen Sockets (H) on the Lower Beam (E) using Allen
Key (L). Insert plastic spacers to improve regidity. Attach two Sockets
(I) to the side of the lower side beams (as shown in the picture).
Frame looks like this.
STEP 07
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
Page 7 of 8
H
H
E
I
H
E
I
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 08
Page 8 of 8
K
A
TABLE TOP
BOTTOM VIEW
nut insertnut insert
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro A leg
Dry Bar frame
Place desktops (A) ontop of frames. Nut inserts in top will align
with plastic joiner brackets using M6x30MM (K) sockets attached
tops to frames.
/