JasonL DBQA1407.W, DBQA1010.W, DBQA1207.W, DBQA1212.W, DBQA1607.W, DBQA1807.W, DBQA2007.W Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the JasonL DBQA1407.W Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
Sizes:
1000x1000
1200x700
1200x1200
1400x700
1600x700
1800x700
2000x700
Page 1 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
Table top x1
Leg Quadro A x2
Upper Beam x1
Lower Beam x1
Plastic bracket x4
Feets or Wheels x4
A
B
C
D
E
F
Allen key x2K
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x4
M6x30MM Socket head x4
G
H
I
J
COMPONENTS
SCREWS
Page 2 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
C
E
F
G H I J
A
B
If you purchase with wheels option
**
Colour of the beam is always black, regardless desk frame colour.
*
**
*
**
H
I
B
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (I) Socket head screw.
Screw the feets or wheels (if you purchase with wheels option)
(F) to the bottom of each leg (B).
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B)
STEP 02
Page 3 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
F
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
Page 4 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
STEP 03
Adjust extendable beam (C) to desired
length using markers and secure beam
at that length using screws provided
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
D
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
STEP 04
Adjust extendable beams (D) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beam
Page 5 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
2
2
2
4
1
1
1
3
3
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
STEP 05
TOP VIEW
Frame looks like this. Using Allen Key, attach Upper Beam (C)
with Sockets (G).
STEP 06
Page 6 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
C
G
Attach Upper Beam (C) to legs (B) using nut insert in legs.
See point attached
G
G
Frame looks like this. Using Allen Key. Tighen Sockets (G) on the Lower Beam
(D) using Allen Key (J). Insert plastic spacers to improve regidity. Attach two
Sockets (G) to the side of the lower side beams (as shown in the picture).
STEP 07
D
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
Page 7 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
ASSEMBLY INSTRUCTIONS
Quadro A Leg
Counter Frame
STEP 08
Page 8 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktop on top of frame. Wood Screws to be drilled into the
underneath Top.
/