JasonL QCA2147.W.WT Operating instructions

Type
Operating instructions

This manual is also suitable for

ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
Page 1 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Sizes:
2400L x 700D mm
2800L x 700D mm
3200L x 700D mm
3600L x 700D mm
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
Table top x2
Leg Quadro A x2
Intermediate Leg Quadro A x1
Upper beam x2
Lower beam x2
Plastic bracket x8
Wheels x6
A
B
C
D
E
F
G
Allen keyL
M8x20MM CSK x12
M8x20MM socket head x4
M6x20MM socket head x8
M6x30MM socket head x8
H
I
J
K
COMPONENTS
SCREWS
Page 2 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
G
A
H I J K
E
D
B
C
I
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
STEP 01
Using Allen Key provided, attach 2 plastic brackets (F) per exterior leg (B) (as
per picture above) using M6x20MM (J) Socket head screw. Attach 4 plastic
brackets (F) to the Intermediate leg (C) using M6x20MM (J).
Screw the wheels (G) to the bottom of each Leg.
STEP 02
Page 3 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
Using Allen Key provided, attach M8x20MM Socket head (I)-
screw socket half way into legs.
G
B
C
F
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
Page 4 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
STEP 03
Adjust extendable beams (D) to desired
length using markers and secure beams
at that length using screws provided.
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
E
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
STEP 04
Adjust extendable beams (E) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beams
Page 5 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
2
2
2
4
1
1
1
3
3
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
STEP 05
TOP VIEW
STEP 06
Page 6 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
D
H
Attach Upper Beams (D) to legs using nut insert.
See point attached
Frame looks like this. Using Allen Key, attach Upper Beams (D)
with Sockets (H).
D
Using Allen Key. Tighen Sockets (H) on the Lower Beam (E) using Allen
Key (L). Insert plastic spacers to improve regidity. Attach two Sockets
(I) to the side of the lower side beams (as shown in the picture).
Frame looks like this.
STEP 07
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
Page 7 of 8
H
H
E
I
H
E
I
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 08
Page 8 of 8
K
A
TABLE TOP
BOTTOM VIEW
nut insertnut insert
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro A
Mobile Counter Table
with intermediate legs
Place desktops (A) ontop of frames. Nut inserts in top will align
with plastic joiner brackets using M6x30MM (K) sockets attached
tops to frames.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

JasonL QCA2147.W.WT Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI