ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
Page 1 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
Table top x1
Leg Quadro A x2
Upper Beam x1
Lower Beam x1
Plastic bracket x4
Wheels x4
A
B
C
D
E
F
Allen key x2K
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x4
M6x30MM Socket head x4
G
H
I
J
COMPONENTS
SCREWS
Page 2 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
C
E
F
G H I J
A
B
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
H
I
F
B
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (I) Socket head screw.
Screw the wheels (F) to the bottom of each leg (B)
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B)
STEP 02
Page 3 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
Page 4 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
C
STEP 03
Adjust extendable beam (C) to desired
length using markers and secure beam
at that length using screws provided
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
D
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
STEP 04
Adjust extendable beams (D) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beam
Page 5 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
2
2
2
4
1
1
1
3
3
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
STEP 05
TOP VIEW
Frame looks like this. Using Allen Key, attach Upper Beam (C)
with Sockets (G).
STEP 06
Page 6 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
C
G
Attach Upper Beam (C) to legs (B) using nut insert in legs.
See point attached
G
G
Frame looks like this. Using Allen Key. Tighen Sockets (G) on the Lower Beam
(D) using Allen Key (J). Insert plastic spacers to improve regidity. Attach two
Sockets (H) to the side of the lower side beams (as shown in the picture).
Using the allen key, tighten two bolts
on the under side of the lower beam.
This will make the frame sturdy.
STEP 07
D
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
Page 7 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
Sizes:
1200x700, 1400x700, 1600x700, 1800x700
ASSEMBLY INSTRUCTIONS
Quadro A Mobile
Counter table
STEP 08
Page 8 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
J
TABLE TOP
BOTTOM VIEW
nut insertnut insert
Place desktop ontop of frame. Nut inserts in top will align with plastic
joiner brackets using M6x30MM (J) sockets attached top to frame.
/
