JasonL QDWB2836.B.WT2 is a 4-person corner workstation that is perfect for any office or home workspace. The height-adjustable desk is made of wood and has a metal frame, so it is both sturdy and stylish. The desk comes with a variety of features, including a built-in cable management system, a modesty panel, and a drawer for storage. The desk is also easy to assemble, so you can get it up and running in no time.
Some of the possible use cases for the JasonL QDWB2836.B.WT2 include:
- Using it as a workstation for multiple people. The desk is large enough to accommodate up to four people, so it is perfect for team projects or group meetings.
Page 1 of 16
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 2 of 16
E
Table top x4
Table top Return x4
Legs Quadro Wood A x2
Legs Quadro Wood A Return x4
Connector frame x1
Beam: Main desk x4
Beam: Return x4
Plastic bracket x24
Joiner plates x8
A
B
C
D
E
F
G
H
I
Allen key x2P
M8x20MM CSK x12
M8x20MM Socket head x12
M6x20MM Socket head x24
M6x30MM Socket head x24
Join plates Screws x8
M6x30mm Mushroom head x12
J
K
L
M
N
O
COMPONENTS
SCREWS
G
F
H
I
J K L M N O
A
B
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
Page 3 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
www.jasonl.com.au
Need help!
Call us on
1300 527 665
The first step is to assemble the
workstation frame, without table tops
and without returns frames and tops.
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 4 of 16
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Mushroom Head Screw (O) - for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
O
Page 5 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Using Allen Key provided, attach 4 plastic brackets (H) per leg (C)
(as per picture above) using M6x20MM (L) Socket head screw. Do
the same with Connector frame (E).
Using Allen Key provided, attach M8x20MM Socket head (K)-
screw socket half way into leg for both legs (C) and into
Connector frame (E).
K
L
STEP 03 STEP 04
CEE
C
Page 6 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 05
Adjust extendable main desk beans (F) to
desired length using markers and secure
beam at that length using screws provided
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
F
Page 7 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Attach main desk beams (F) to legs (C) and Connector frame (E)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach main desks beams (F)
with Socket (J)
STEP 07
J
J
J
J
J
J
J
J
STEP 06
CE
Page 8 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
www.jasonl.com.au
Need help!
Call us on
1300 527 665
The next step is to assemble and
attach the return structures to the
main frame.
STEP 08
Attach the return beams (G) to return legs (D) using nut insert in legs. See point attached.
Then, connect the hook of the return beam to the beam of the main structure.
Repeat thsi step until the entire frame is complete. Page 9 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
J
G
D
Page 10 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
www.jasonl.com.au
Need help!
Call us on
1300 527 665
The next step is about to add both the
main and return table tops over the
entire frame.
N
I
B
STEP 09
Page 11 of 16
Attach Connector Plates (I) to Return Top (B) by tightening Screws (N)
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 10
Page 12 of 16
Place table tops (A) on top of frame - with cutout at the back of the desk. Please leave 25mm gap between 2 x table top (A) so we can
drop the return desk mounted screen in between the two tops.
Using nut inserts in the desk, use M6x30mm socket (M) and attach desktop to the frame.
Using nut inserts in the desktop, use M6x30mm socket (M) and attach return desktops (B) to the frame.
Once desktop are attached and secure to the frame, use woods screws (N) and secure joiner plates (I) to the underside of desktop A.
nut insert nut insert
M
I
N
B
A
nut insertnut insert
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 13 of 16
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
If you have purchased with
desk mounted screens
Page 14 of 16
STEP 11
Please position the screen so that it sits at the same level as the bottom surface of the desktop. Please adjust the screen
position to make sure the screen end meet with the the desk end and please hold the screen.
Second person to insert single desk mounted rod brackets. The brackets rod goes inside the pre-drilled screens holes.
The screen holes are located around 300mm from the screen end each. First person to hold screen stand still.
Desk based screen divider assembly instruction:
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
B
A
Page 15 of 16
STEP 12
Second person to drill 4 holes into the brackets holes with provided wood screws into the underneath desktop.
Please check the position of the rod brackets and bracket holes again before drilling the screws all the way
through. Please tighten all the wood screws.
side view
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 16 of 16
STEP 13
Using an Allen key remove top 4 caps from all screens uprights. Bring four partition towards one another and slide the 4 way
connector rod - down between the four screen uprights.
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg 4 person
Corner workstation
Sizes: 1400Lx1800W , 1600Lx1800W , 1800Lx1800W mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au