Home Decorators Collection HB7054A-35 Installation guide

Brand: Home Decorators Collection

Model: HB7054A-35

Type: Installation guide

Home Decorators Collection HB7054A-35 is exterior LED wall lantern with timeless elegant design. It is easy to assemble and install. Suitable for use in both residential and commercial applications, this versatile fixture is perfect for illuminating entryways, patios, and other outdoor areas. The durable construction and weather-resistant finish ensure longevity, even in harsh weather conditions.

HOME

DECORATORS

C O L L E C T I O N

Exterior LED Wall Lantern

Essex

OMSID 204294444

(Brushed Nickel Finish)

INSTRUCTION MANUAL

Page 1

HB7054A-35 E/S

Thank you for purchasing this Home Decorators Collection exterior

light fixture. This product has been manufactured with the highest

standards of safety and quality.

FEATURES:

1. Exterior LED Wall Lantern in Brushed Nickel Finish.

2. Timeless elegant design.

3. Easy to assemble and install.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home depot, please call our Customer

Service Team at 1-800-986-3460 or visit www.homedepot.com.

Please reference your OMSID ( 204294444 Brushed Nickel Finish

fixture).

Page 2

CAUTION:

1. Before starting installation of this fixture or removal of a

previous fixture, disconnect the power by turning off the circuit

breaker or by removing the fuse at the fuse box.

2. CONSTULT A QUALIFIED ELECTRICIAN IF YOU HAVE

ANY ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture,

please contact our Customer Service Team at 1-800-986-3460

or visit www.homedepot.com. Please reference your OMSID (

204294444 Brushed Nickel Finish fixture).

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

Page 3

Phillips Screwdriver

Exterior Silicon

Rubber Sealant

Wire StrippersWire Cutters

Safety Glasses Electrical Tape

PARTS INCLUDED (parts are not to scale):

Page 4

(1) Glass Shade (1) Fixture Body (1) Shade Ring

(2) Fixture Mounting

Screws

(2) Ring Screws(1) Mounting Bracket

(2) Hex Nuts (3) Wire Nuts(2) Bracket Mounting Screws

INSTALATION & ASSEMBLY:

1. Shut off power at the fuse box or circuit breaker box. Remove the

old fixture, including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts on a

clear surface. Take care not to lose any small parts necessary for

installation.

3. Pull the power Supply Wires out from the Outlet Box. Attach the

Mounting Bracket to the Outlet Box using the Bracket Mounting

Screws. Turn the swivel on the Mounting Bracket to align it

horizontally. Tighten the swivel screw (Fig. 1).

4. Strip approximately ¼” of insulation from each supply and fixture

wire.

Page 5

Wall

Bracket Mounting Screw

Mounting Bracket

Turn Swivel

Power Supply Wires

Outlet Box

Fig. 1

INSTALLATION & ASSEMBLY (cont.):

5. Attach the Black Fixture Wire to the Black Supply Wire using

a Wire Nut, then the White Fixture Wire to the White Supply

Wire using a Wire Nut. Attach the Fixture Ground Wire to the

Supply Ground Wire using a Wire Nut (Fig. 2).

6. Wrap all wire connections with electrical tape for a more

secure connection. Carefully tuck the wires and wire

connections into the Outlet Box.

7. Place the Fixture Body over the Outlet Box, aligning the holes

on the swivel with holes on the Wall Plate. Thread the Fixture

Mounting Screws into the Wall Plate to secure the Fixture

Body in place (Fig. 2).

Page 6

Black Supply Wire

Wire Nut

Black Fixture Wire

White Supply Wire

White Fixture Wire

Supply Ground Wire

Fixture Mounting

Screw

Fixture Body

Fixture Ground Wire

Fig. 2

Top View

Wall Plate

INSTALLATION & ASSEMBLY (cont.):

8. Slide the Glass Shade into the Fixture Body. Using the Shade

Ring and the Ring Screws secure the Glass Shade in place

(Fig. 3).

Page 7

Glass Shade

Fixture Body

Wall Plate

Shade Ring

Ring Screw

Wall

Fig. 3

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use

clean water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off

the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and

interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry

soft cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a

period of three (3) years from date of purchase. This warranty applies only to the original consumer

purchaser and only to products used in normal use and service. If this product is found to be defective, the

manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement for the product at

the manufacturer’s discretion, provided that the product ahs not been damaged through misuse, abuse,

accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product

that is found to have been improperly installed, set-up, or used in any way not in accordance with the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to

faculty material or workmanship. This warranty shall not apply to the finish on any portion of the product,

such as surface and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether express or implied

of fitness for a particular purpose, other than the warranty contained herein. The manufacture

specifically disclaims any liability and shall not be liable for any consequential or incidental loss or

damage, including but not limited to any labor/expense cost involved in the replacement or repair of

said product.

Symptom

Possible Cause

Corrective Action

Lights do not come on at all.

Wall switch and/or circuit

breaker is off.

Turn on wall switch and/or

circuit breaker.

Incorrect or loose wire

connections.

Access Outlet Box and fix wire

connections.

LED driver has malfunctioned.

Replace LED driver.

Fuse blows or circuit breaker

trips when light is turned on.

Crossed wires or power wire is

grounding out.

Access Outlet Box and fix wire

connections

Page 8

HOME

DECORATORS

C O L L E C T I O N

Farol de Pared LED para Exterior

Essex

OMSID 204294444

(Acabado de Níquel Cepillado)

MANUAL DE INSTRUCCIONES

Page 9

HB7054A-35 E/S

Page is loading ...

Home Decorators Collection HB7054A-35 Installation guide

Brand: Home Decorators Collection

Model: HB7054A-35

Type: Installation guide

Download PDF

report

in other languages

español: Home Decorators Collection HB7054A-35 Guía de instalación

Home Decorators Collection HB7054A-35 Installation guide

Home Decorators Collection HB7054A-35 Installation guide

in other languages

Related papers

Other documents