Maxboost MB000063 User manual

Brand: Maxboost

Model: MB000063

Category: Screen protectors

Type: User manual

7. Without touching the

sticky side of the

protector, gently tap the

top of the protector to

the top side of the

framge making sure the

protector fall exactly

between the frame

8. Tap the center of the

screen protector, the

protector will start adhere to

the phone screen by itself. If

there are any bubble, try use

your nger press down and

drive the bubble out

towards the closest edge.

Attention! “White Halo Eect”

One in 10,000 iPhones may have slightly

more bumped screen than others. It will

lead to an un-sticky edge of the screen

protector, we call it “White Halo Eect”.

If you are one of those unique iPhone

owners, you are covered:

1. Leave the current screen protector on

your phone for a temporary solution.

2. Contact service@maxboostpower.com

with a picture of the “White Halo Eect”.

3. We will provide you a special version of

screen protector to t your phone.

1. Use the wet wipe to

remove any dirt on the

screen.

2. Use the dry wipe to

ensure all dust and liquid

have been removed

4. Dab the sticker side of the

dust-absorber to eliminate

any trace amounts of debris

on the screen.

3. Place the screen protector

guidance frame on top of the

phone and mount it on the

phone snuggly according to

the imprinted text on the

frame

6. Slowly drop the screen

protector onto the

phone screen. The frame

will help you achieve an

accurately alignment.

Always make sure the

top edge of the screen

protector is adjacent to

the top side of the

assistive frame.

9. Your phone is now

protected!

http://www.maxboostpower.com/glass-protector

5. Remove the bottom

protective layer by pulling

away the top rectangular

tab.

1

Maxboost MB000063 User manual

Brand: Maxboost

Model: MB000063

Category: Screen protectors

Type: User manual

Download PDF

Related papers

Other documents