Purity UU000068 User guide

Category
Screen protectors
Type
User guide

This manual is also suitable for

8. Tap the center of the screen
protector. The protector will start to
adhere to the screen. If there are any
bubbles, use your finger to press down
and drive the bubbles out towards the
closest edge.
FAQ
Which cases will this screen protector work with?
-This screen protector is compatible with the majority of phone cases.
How do I remove any remaining air bubbles after installation?
-Before installation, it is very important to properly clean and dust your screen. For the
remaining air bubbles, we recommend using the comb provided, or a credit card. Some air
bubbles may take up to 24 hours to fully disappear.
Will this screen protector cause any interference with my smartphone’s sensor or facial
recognition?
-No.There will be no interference.This screen protector is compatible with all iPhone features.
6. Without touching the sticky side of
the protector, gently tap the top of the
protector to the top side of the frame
making sure the protector falls exactly
between the frame.
1. Use the wet wipe to
remove any dirt on the
screen.
2. Use the dry wipe to
ensure all dust and liquid
have been removed.
4. Dab the sticker side
of the dust-absorber to
eliminate any amounts of
debris on the screen.
9. Remove the guidance frame
and your phone is now protected!
5. Remove the bottom protective
layer by pulling away the top
rectangular tab.
7. Slowly drop the screen
protector onto the screen. Always
make sure the top edge of the
screen protector is adjacent to the
top side of the guidance frame.
3. Place the guidance
frame on top of the phone
and ensure it fits snugly.
Align the imprinted text on
the frame with your phone.
Premium Glass Screen Protector
Premium Glass Screen Protector
  • Page 1 1

Purity UU000068 User guide

Category
Screen protectors
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI