GLASS SCREEN PROTECTOR
8. Tap the center of the screen
protector. The protector will begin to
adhere to the screen. If there are any
air bubbles, push your finger down
and drive the bubbles out towards the
closest edge.
FAQ
Why doesn't it t my phone?
Please check if the screen protector type you purchased matches the size of your phone.
Please align the top of the frame and size it up carefully.
I see air bubbles. How can I remove them?
Clean the screen very carefully and use the dust-absorber sticker to get rid of the dust. Also,
use the sticker to eliminate the dust from the back of the screen protector.
Will this screen protector interfere with my phone’s sensor or facial recognition?
Don’t worry. There will be no interference. This screen protector is compatible with all iPhone
features.
Glass Screen Protector
6. Without touching the sticky side of
the protector, gently tap the top of the
protector to the top side of the frame
making sure the protector falls exactly
between the frame.
TOP
BOTTOM
1. Take the wet wipe and
use it to remove any dirt on
the screen.
2. Then take the dry
wipe and make sure all
dust and liquid has been
removed.
4. Dab the sticker side of
the dust-absorber to remove
any amount of debris on the
screen.
9. Congratulations. Your phone is
now protected!
5. Remove the bottom protective
layer by carefully pressing down on
the indicated tab until the two
seperate.
TOP
BOTTOM
7. Carefully drop the screen
protector onto the screen. Always
make sure the top edge of the
screen protector is adjacent to the
top side of the assistive frame.
TOP
BOTTOM
3. Place the protector
guidance frame on top of the
phone and mount it on the
phone securely.
according to the
imprinted text on the frame.
TOP
BOTTOM
TOP
BOTTOM
FULL FRAMED SCREEN SHIELD