Tethys TT000059 User guide

Brand
Tethys
Model
TT000059
Type
User guide

This manual is also suitable for

INSTALLATION
TEMPERED GLASS SCREEN PROTECTOR
8. Tap the center of the screen
protector. The protector will start to
adhere to the screen. If there are any
bubbles, use your finger to press down
and drive the bubbles out towards the
closest edge.
FAQ
Will this screen protector work with any case?
This screen protector is compatible with most phone cases.
How can I get rid of the bubbles on my screen after installation?
It is important to clean and dust your screen prior to installing. For the remaining bubbles
we recommend rubbing them out with your nger or a credit card. Some bubbles can
take up to 24 hours to disappear.
Will this screen protector interfere with my phone’s sensor or facial recognition?
There will be no interference, this screen protector is compatible with all iPhone features.
Tempered Glass Screen Protector
6. Without touching the sticky side of
the protector, gently tap the top of the
protector to the top side of the frame
making sure the protector falls exactly
between the frame.
1. Use the wet wipe to
remove any dirt on the
screen.
2. Use the dry wipe to
ensure all dust and liquid
have been removed.
4. Dab the sticker side of
the dust-absorber to
eliminate any amounts of
debris on the screen.
9. Your phone is now protected!
5. Remove the bottom protective
layer by gently pressing down on
the indicated tab until the two
separate.
7. Slowly drop the screen
protector onto the screen. Always
make sure the top edge of the
screen protector is adjacent to the
top side of the assistive frame.
3. Place the screen
protector guidance frame on
top of the phone and mount
it on the phone snuggly
  • Page 1 1

Tethys TT000059 User guide

Brand
Tethys
Model
TT000059
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents