2. Computers & electronics
  3. Telecom & navigation
  4. Screen protectors
  5. Maxboost
  6. SP-IP6-CLR

Maxboost SP-IP6-CLR User guide

  • Hello! I am an AI chatbot trained to assist you with the Maxboost SP-IP6-CLR User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GLASS SCREEN PROTECTOR
Method 01: Hinge Method (Recommended)
3. Dab the sticker side of the
dust-absorber to eliminate any
trace amounts of debris on the
screen.
5. Place the guide
stickers on one side to
hold the screen
protector in place.
4. Place the screen protector
(tab side down) over the
screen so that the cut-outs
perfectly align with the phone.
6. Flip the screen protector
over and remove the sticker
cover (start by grabbing the
tab and pulling away).
9. Ensure there are no air
bubbles; your phone is now
protected.
8. Remove the guide stickers
and peel away the top
protective layer by pulling the
wings away from the screen.
7. Carefully place the screen
back onto the phone using
the guide sticker as a hinge.
Method 02: Wing Method
3. Dab the sticker side of the
dust-absorber to eliminate any
trace amounts of debris on the
screen.
4. Remove the bottom
protective layer by pulling
away the top rectangular tab.
5. Holding the application
wings align the screen
protector with the front of
screen.
6. Ensure all cutouts and
edges are correctly aligned
then press down firmly.
8. Ensure there are no air
bubbles; your phone is
now protected.
7. Peel away the top
protective layer by pulling the
wings away from the screen.
2. Use the dry wipe to
ensure all dust and liquid
have been removed.
1. Wipe the screen clean
with the included Alcohol
Prep Pad.
2. Use the dry wipe to
ensure all dust and liquid
have been removed.
1. Wipe the screen clean
with the included Alcohol
Prep Pad.
LIFE
TIME
/