Page is loading ...
Inspiring Excellence in Fish Keeping!
BettaStyle
www.aquaone.com.au
Instruction version: 20/09/2013
2
Set Up Instructions
2. Wash aquarium gravel. Place the gravel into a bucket, run
water through & churn it over with your hand until the water
running out of the bucket is clear. It is important to wash the
gravel thoroughly. Repeat this process severa times until the
the gravel has been completely washed
.
3. Place washed gravel over the base of the Aquarium.
4. At this stage place the plastic plant and any other
decorations in to the tank.
5. Fill the aquarium with tap water.
6. Use Aqua One quality Water Conditioner
(Sold separately) to remove harmful
chemicals from tap water. E.g. chlorine
.
7. Test and adjust pH levels using a quality test kit (sold
separately)
8. Allow the aquarium to stand for 5-7 days before
introducing sh.
Feature LED light unit sold seperately.
1. Insert the background into the holder located on the
back of the tank. Note the background is double sided so
face the desired picture to the front of the aquarium.
/
