Microdia AiroBlue CLASS 1 USB DONGLE User manual

AiroBlue

CLASS 1 USB DONGLE

USER MANUAL

Thank you for purchasing MICRODIA

AiroBlue

Class 1 USB Dongle. This User Manual will teach you how to

install AiroBlue

Class 1 USB Dongle.

AiroBlue Class 1 USB Dongle User Manual

Nov 2006 MICRODIA Ltd.

USB Adapter Installation

Windows Bluetooth Software Installation

1. Place the installation CD-ROM into the PC, the setup should start automatically. If the setup does not start,

please go to Windows Explorer, locate the CD-ROM and run [autorun.exe]

2. Choose [Install Drivers and Application Software]

3. The InstallShield Wizard will start and follow the installation instruction

NOTE:

• Please install the USB Bluetooth software before inserting the USB adapter

• For Windows 2000/XP users, a [Driver Signature Notice] window appears, please click the [OK] button.

• For Windows 98 users, a window appears which asks you to insert the Windows 98 CD-ROM. Please insert the

original Windows 98 CD-ROM and click [OK]

•

After installation, click Start/Control Panel / System / Device Manager. Check under [Universal Serial Bus

controllers] that a [USB Bluetooth Device] is installed

• If the information is not present, please unplug the adapter and plug in the adapter again to initiate the driver.

Most problems or technical issues can be resolved by simply visiting our Support Section in MICRODIA

website,

www.microdia.com

or send us an email to [email protected].