Microdia FlashMover MS-Direct Installation Manual & Operation Manual

Brand: Microdia

Model: FlashMover MS-Direct

Category: Card readers

Type: Installation Manual & Operation Manual

MS-DIRECT CARD READER

INSTALLATION GUIDE &

OPERATION MANUAL

INSTALLATION GUIDE

Thank you for purchasing MICRODIA

FlashMover

USB2.0 MS-

Direct Card Reader. The FlashMover

USB2.0 MS-Direct Card

Reader works with USB enabled Microsoft Windows 98, ME,

2000, XP or above, and Mac 9/X and higher systems. This

installation guide contains all the information you need to

install your FlashMover

USB2.0 MS-Direct Card Reader.

For Windows Users

To install the FlashMover

USB2.0 MS-Direct Card Reader on Windows 98/98SE:

1. Do not plug the card reader into the PC USB port before the installation is completed.

2. Download the driver from www.microdia.com

or insert the Driver CD in the CD-ROM drive.

3. Double click the file after downloading or the CD-ROM will auto-run and pop out a Driver Installation Manual window.

4. In the Driver Installation Manual, select [Memory Stick]

5. The driver installation program will start to run and follow the installation instruction

6. After installation, reboot your computer.

7. Plug in your card reader into the USB port.

8. There is a new removable drive added to your computer.

9. Insert Memory Stick

Card to access files in your card.

NOTE: Please check MICRODIA

website, www.microdia.com, for downloading the latest driver.

To install the FlashMover

USB2.0 MS-Direct Card Reader on Windows ME/2000/XP:

1. Plug the card reader into your computer USB port.

2. It is fully Plug-&-Play for Windows ME/2000/XP, no driver installation needed.

3. A new removable drive is added to your computer after plug in the card reader.

Insert Memory Stick

Card to access files in your card.

For Macintosh Users

To install the FlashMover

USB2.0 MS-Direct Card Reader on Mac OS 9/X and above

1. Plug the card reader into your computer USB port.

2. It is fully Plug-&-Play for Mac OS9/X and above, no driver installation needed.

3. A new removable drive is added to your computer after plug in the card reader.

4. Insert Memory Stick

Card to access files in your card.

NOTE:

- Please check MICRODIA

website, www.microdia.com, for downloading the latest driver.

Please go to Mac website to update the latest version of Mac OS.

Removing your MS

card from the FlashMover

USB2.0 MS-Direct Card Reader

To remove the Memory Stick

card on Windows system

1. Close all files that are opened and reside on the Memory Stick

card.

2. You can remove your card safely after the LED stop blinking

To remove the Memory Stick

card on Mac system

1. The Memory Stick

card must be [EJECTED] or [UN-MOUNTED] by dragging the card’s disk icon in the trash.

CAUTION: Failure to properly [EJECT] the card before removing the card from the card reader could case data

loss or corruption.

OPERATION MANUAL

This operation manual contains all the information you need to

operate your FlashMover

MS-Direct USB2.0 Card Reader.

USING MS-Direct FlashMover

CARD READER

1. Connect MS-Direct FlashMover Card Reader

directly to the Computer’s USB port

2. LED on the MS-Direct FlashMover Card Reader will

turn to green.

3. Open My Computer - 1 Removable Disk will be

added. It is now ready for reading/writing.

MS-Direct FlashMover

CARD READER FOR MS/MS PRO/MS DUO/MS PRO DUO CARD AND MORE

1. After connecting the Card Reader to the computer,

you may insert the Smart Media Card

2. MS-Direct FlashMover Card Reader is compatible

to MS/MS PRO/MS PRO DUO/MS DUO, etc.

3. Insert the MS/MS PRO/MS PRO DUO/MS DUO Card

into the upper slot.

NOTE: The arrow on the card must be facing toward the

card reader

4. If the MS/MS PRO/MS PRO DUO/MS DUO Card is

inserted correctly, a LED light on the Card Reader

will turn to orange. If not, please remove the

Card and repeat Steps 3.

5. Open My Computer and double click the

Removable Disk such as Removable Disk (H:).

NOTE: The Removable Disk Drive may not be (H:). It is

depended on your computer settings.

6. Removable Disk (H:) will be opened and it is ready

to read/write to the MS/MS PRO/MS PRO DUO/MS

DUO Card. Ensure all operations are completed

before removing the card.

CAUTION!

1. Backup your data before formatting the card as data will be lost.

2. Wait for all operations to be completed before removing the card.

3. The card is designed to fit easily into the system one way only. Do not bend the card or force it into the

slot.

4. Do not touch the connections with your fingers or metal objects.

5. Do not bend or flex the card reader.

(All instructions and handling information should be used in conjunction with the owner’s manuals of your

devices and computer systems.)

** USER ALERT! **

By default, Windows XP or above will format any cards having a capacity greater than 32MB with FAT32 file

system. As most digital cameras can only operate with FAT file system, please select FAT as the file system

when you reformat the card with capacity 2.0GB or below.

MICRODIA (USA)

Camden Ave., San Jose, CA 95120, USA

MICRODIA (UK)

Brickhill Drive, Manton Height, Bedford,

MK41 7QH, England

MICRODIA (HONG KONG)

International Sales Office

1371, HITEC, Trademart Drive, Kowloon Bay, Hong Kong

Tel: +852.2801.7813 Fax: +852.2801.7060

Web: http://www.microdia.com

Email: [email protected]

Microdia FlashMover MS-Direct Installation Manual & Operation Manual

Brand: Microdia

Model: FlashMover MS-Direct

Category: Card readers

Type: Installation Manual & Operation Manual

Download PDF

report

Microdia FlashMover MS-Direct Installation Manual & Operation Manual

Microdia FlashMover MS-Direct Installation Manual & Operation Manual

Related papers

Other documents