Moxa EXPC-1519 Series User manual

EXPC-1519 Series

Hardware User’s Manual

Edition 2.0, February 2017

www.moxa.com/product

EXPC-1519 Series

Hardware User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Copyright Notice

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Moxa.

Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited

to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for

its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

-free: 1-888-669-2872

Tel:

+1-714-528-6777

Fax:

+1-714-528-6778

Moxa China (Shanghai office)

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia

-Pacific

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

Table of Contents

1. Introduction ...................................................................................................................................... 1-1

Overview ........................................................................................................................................... 1-2

Model Descriptions and Package Checklist .............................................................................................. 1-2

Appearance ........................................................................................................................................ 1-3

Features ............................................................................................................................................ 1-5

Hardware Specifications ...................................................................................................................... 1-6

LED Indicators and Buttons .................................................................................................................. 1-8

Description of OSD Buttons .......................................................................................................... 1-8

2. Hardware Installation ....................................................................................................................... 2-1

Mounting the EXPC-1519 ..................................................................................................................... 2-2

VESA Mounting ........................................................................................................................... 2-3

Panel Mounting ........................................................................................................................... 2-3

Yoke Mounting ............................................................................................................................ 2-4

Wiring Requirements ........................................................................................................................... 2-4

Connecting the Power Supply ............................................................................................................... 2-5

Connecting the Interfaces .................................................................................................................... 2-5

Installing the SATA Storage Drive ......................................................................................................... 2-9

Installing a CFast Card ...................................................................................................................... 2-10

Connector Pin Assignment ................................................................................................................. 2-11

Serial Ports ............................................................................................................................... 2-11

Ethernet Ports ........................................................................................................................... 2-11

Terminal block of EXPC-1519-C1-S2-T / EXPC-1519-C7-S2-T ......................................................... 2-12

Grounding the unit ............................................................................................................................ 2-13

Powering on the EXPC-1519 ............................................................................................................... 2-14

Real Time Clock ........................................................................................................................ 2-14

3. BIOS Setup ........................................................................................................................................ 3-1

Entering the BIOS Setup Utility ............................................................................................................ 3-2

Main Information ......................................................................................................................... 3-3

Advanced Settings ....................................................................................................................... 3-3

Boot Configuration ...................................................................................................................... 3-4

HDC Configuration: Storage Device BIOS Settings ........................................................................... 3-4

Video Configuration ..................................................................................................................... 3-8

Chipset Configuration .................................................................................................................. 3-9

Active Management Technology Support ...................................................................................... 3-10

Hardware Monitor ...................................................................................................................... 3-11

Security Settings .............................................................................................................................. 3-11

Set Supervisor Password ............................................................................................................ 3-12

Power Settings ................................................................................................................................. 3-12

Boot Settings ................................................................................................................................... 3-13

Boot Type................................................................................................................................. 3-13

PXE Boot to LAN ........................................................................................................................ 3-13

Add Boot Options ...................................................................................................................... 3-14

USB Boot ................................................................................................................................. 3-14

EFI Device First ......................................................................................................................... 3-14

Boot Delay Time ........................................................................................................................ 3-14

Legacy ..................................................................................................................................... 3-14

Exit Settings .................................................................................................................................... 3-15

Exit Saving Changes .................................................................................................................. 3-15

Save Change Without Exit .......................................................................................................... 3-15

Exit Discarding Changes ............................................................................................................. 3-15

Load Optimal Defaults ................................................................................................................ 3-15

Load Custom Defaults ................................................................................................................ 3-15

Save Custom Defaults ................................................................................................................ 3-16

Discard Changes ....................................................................................................................... 3-16

Upgrading the BIOS .......................................................................................................................... 3-16

A. Safety Installation Instructions ........................................................................................................ A-1

1

1. Introduction

Thank you for purchasing the Moxa EXPC-1519 series x86 industrial panel computer.

This manual introduces the hardware installation, connector interfaces, and BIOS setup of the EXPC-1519. For

software configuration and management, please refer to the user’s manual for your operating system.

The following topics are covered in this chapter:



Overview



Model Descriptions and Package Checklist



Appearance



Features



Hardware Specifications



LED Indicators and Buttons

 Description of OSD Buttons

EXPC-1519 Series Hardware Introduction

1-2

Overview

The EXPC-1519 series Zone 2 panel computers feature advanced 3rd generation Intel® Core™

processors—i7-3555LE and Celeron 1047UE—with 4 GB of system memory expandable to 16 GB, delivering a

reliable, high-performance platform of wide versatility for use in the harsh oil and gas environments.

Model Descriptions and Package Checklist

The EXPC-1519 Series includes the following models:

• EXPC-1519-C1-S1-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Celeron® Processor

1047UE 1.4GHz, cable gland with standard I/O design, projected capacitive touch screen, IP66, -40 to 70°C

operating temperature, 2.5” SSD tray and CFast slot

• EXPC-1519-C1-S2-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Celeron® Processor

1047UE 1.4GHz, cable gland with terminal block I/O design, projected capacitive touch screen, IP66, -40 to

70°C operating temperature, 2.5” SSD tray and CFast slot

• EXPC-1519-C1-S3-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Celeron® Processor

1047UE 1.4GHz, harsh environment I/O connector, projected capacitive touch screen, IP66, -40 to 70°C

operating temperature, 2.5” SSD tray and CFast slot

• EXPC-1519-C7-S1-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Core™ i7-3555LE

Processor 2.5GHz, cable gland with standard I/O design, projected capacitive touch screen, IP66, -40 to

70°C operating temperature, 2.5” SSD tray and CFast slot

• EXPC-1519-C7-S2-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Core™ i7-3555LE

Processor 2.5GHz, cable gland with terminal block I/O design, projected capacitive touch screen, IP66, -40

to 70°C operating temperature, 2.5” SSD tray and CFast slot

• EXPC-1519-C7-S3-T: Fanless, Zone 2 19-inch 1000 nits LCD panel computer, Intel® Core™ i7-3555LE

Processor 2.5GHz, harsh environment I/O connector, projected capacitive touch screen, IP66, -40 to 70°C

operating temperature, 2.5” SSD tray and CFast slot

Each model is shipped with following standard items:

Model Package Checklist

EXPC-1519-C1-S1-T

EXPC-1519-C7-S1-T

EXPC-1519-C1-S2-T

EXPC-1519-C7-S2-T

• 1 EXPC-1519 panel computer

• HDD/SSD installation kit

• 1 2-pin terminal block for DC power input

• 1 3-pin terminal block for AC power input

• Quick installation guide

• Documentation & software DVD

• Warranty card

EXPC-1519-C1-S3-T

EXPC-1519-C7-S3-T

• 1 EXPC-1519 panel computer

• HDD/SSD installation kit

• USB female connector installation kit

• RJ45 female connector installation kit

• DC power installation kit

• AC power installation kit

• Quick installation guide

• Documentation & software DVD

• Warranty card

EXPC-1519 Series Hardware Introduction

1-3

Appearance

Front View

Bottom View

(EXPC-1519-C1-S1-T, EXPC-1519-C7-S1-T, EXPC-1519-C1-S2-T, EXPC-1519-C7-S2-T)

Bottom View (EXPC-1519-C1-S3-T, EXPC-1519-C7-S3-T)

EXPC-1519 Series Hardware Introduction

1-4

Rear View (EXPC-1519-C1-S1-T, EXPC-1519-C7-S1-T)

Rear View (EXPC-1519-C1-S2-T, EXPC-1519-C7-S2-T)

EXPC-1519 Series Hardware Introduction

1-5

Rear View (EXPC-1519-C1-S3-T, EXPC-1519-C7-S3-T)

Dimensions

Features

• Anti-scratch, 19-inch sunlight viewable, 1000 nits LCD panel

• High performance Intel® 3rd generation Core™ i7-3555LE or Celeron 1047UE CPU

• Fanless design with highly efficient heat dissipation

• -40 to 70°C extended operation temperature

• Multi-touch with glove-friendly touch screen interface

• Options of cable gland and standard USB Type A/RJ-45 connectors

• Totally sealed IP66 / NEMA 4X enclosure

• Class 1 Division 2, ATEX Zone 2, and IECEx certified

• Dual AC/DC power supply

• Optional WLAN, 100M Fiber optic connection

EXPC-1519 Series Hardware Introduction

1-6

Hardware Specifications

Computer

CPU:

Intel® Core™ i7-3555LE 2.5GHz or Intel® Celeron® 1047UE 1.4GHz Processor

Supported

OS: Windows Embedded Standard 7 32/64-bit, Windows 7 Professional 32/64-bit

System Chipset:

Intel® QM77 Express Chipset (Intel® BD82QM77 PCH)

BIOS:

64 Mbit SPI Flash

Graphics Controller:

Intel® HD Graphics 4000

System Memory:

2 SO-DIMM slot, DDR3/DDR3L support, 4 GB pre-installed, maximum 16 GB capacity

Expansion Bus:

1 mini PCIe socket (wireless module must be ordered separately)

Touchscreen:

Projected capacitive touch, 7H surface hardness, anti-reflection treatment, glove-friendly

Storage

SSD/

HDD Support: 2.5” SATA, 7 or 9.5 mm in height, access externally

CFast :

Push-push type, access externally

Display

Panel Size:

19-inch SXGA, 1000 nits LED backlit LCD

Aspect Ratio:

5:4

Response Time:

5 ms

Contrast Ratio:

1000:1

Viewing Angles:

• Horizontal: 170° (left to right)

• Vertical: 160° (up to down)

Max Colors:

16.7 M colors

Resolution:

• VGA:

640 x 480

• SVGA: 800 x 600

• XGA: 1024 x 768

• SXGA: 1280 x 1024

Serial Communication Parameters

Data Bits:

5, 6, 7, 8

Stop Bits:

1, 1.5, 2

Parity:

None, Even, Odd, Space, Mark

Flow Control:

RTS/CTS, XON/XOFF

Baudrate:

50 bps to 115.2 Kbps

Seri

al Signals

RS

-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS

-422: TxD+, TxD-, RxD+, RxD-, GND

RS

-485-4w: TxD+, TxD-, RxD+, RxD-, GND

RS

-485-2w: Data+, Data-, GND

Interface

(EXPC-1519-C1-S1/EXPC-1519-C7-S1)

Connector type:

On motherboard via cable glands

USB:

3 USB 2.0 hosts, Type A connectors

VGA:

15-pin D-Sub connector (DB15 female), with resolution up to 2048x1536 pixels with 32-

bit color at 75 Hz

Serial Port:

2 RS-232/422/485 ports, software-selectable (DB9 male)

Ethernet:

2 auto-sensing 10/100/1000 Mbps ports (RJ45)

Optical Fiber:

2 multimode 100M fiber optic ports

AC:

100 to 240 VAC (3-pin terminal block)

DC:

24 VDC (2-pin terminal block)

Interface (EXPC-1519-C1-S2/EXPC-1519-C7-S2)

Connector Type:

On terminal block via cable glands

U

SB: 4 USB 2.0 hosts, terminal block

Serial Port:

2 RS-232/422/485 ports (terminal block), software-selectable

Ethernet:

2 auto-sensing 10/100/1000 Mbps ports (terminal block)

EXPC-1519 Series Hardware Introduction

1-7

Optical Fiber :

2 multimode 100M fiber optic ports

AC:

100 to 240 VAC (3-pin terminal block)

DC:

24 VDC (2-pin terminal block)

Interface (EXPC-1519-C1-S3/EXPC-1519-C7-S3)

Connector Type:

On bottom panel

USB:

1 USB 2.0 hosts, Type A connector

Ethernet:

1 auto-sensing 10/100/1000 Mbps port (RJ45)

AC:

100 to 240 VAC (3-pin terminal block)

DC:

24 VDC (2-pin terminal block)

LEDs and Buttons

System LEDs:

Power, Fiber1, Fiber2, LAN1, LAN2, Touch, Info, DAY, Dusk, Night

LAN LEDs:

100M/Link, 1000M/Link (on each RJ-45 connector)

Buttons:

Power, Brightness +/-, Fn, Touch, Info, Brightness mode

Physical Characteristics

Housing:

Aluminum

Weight:

10.7 kg

Dimensions:

483 x 408 x 99.5 mm (19.02 x 16.06 x 3.92 in)

Mounting:

VESA mounting (100 x 100 mm), desktop mounting, yoke mounting, wall mounting, and panel

mounting

Envir

onmental Limits

Operating Temperature:

-40 to 70°C (-40 to 158°F)

Storage Temperature:

-40 to 70°C (-40 to 158°F)

Ambient Relative Humidity:

5 to 95% (non-condensing)

Anti

-Vibration: 2 g rms, 5-500 Hz frequency, compliant with IEC 60068-2-6 standard

A

nti-Shock: 20 g rms, half sine wave under system operating, 11 ms duration, compliant with IEC

60068

-2-27 standard

Power Requirements

Input Voltage:

• DC: 24 VDC (with tolerance from 18 to 32 VDC, 2

-pin terminal block)

• AC: 100 to 240 VAC

Power Consu

mption: Less than 120 W, 2.5 A @ 24 VDC

Standards and Certifications

Safety:

UL 60950-1, IEC 60950-1

Hazardous Environments:

Class 1 Division 2, ATEX Zone 2, IECEx

EMC:

EN 55032/24

EMI:

CISPR

32, FCC Part 15B Class A

EMS:

• IEC 61000

-4-2 ESD: Contact 4 kV; Air 8 kV

• IEC 61000

-4-3 RS: 10 V/m (80 MHz to 1 GHz)

• IEC 61000

-4-4 EFT: Power 2 kV; Signal 1 kV

• IEC 61000

-4-5 Surge: Power 2 kV; Signal 1 kV

• IEC 61000

-4-6 CS: 10 V

• IEC 61000

-4-8, IEC 61000-4-11

Igress Protection Rating:

IP66 / NEMA 4X

Green Product:

RoHS, cRoHS, WEEE

Warranty

Warranty Period:

3 years for computer system, 1 year for LCD panel

Details:

See www.moxa.com/warranty

EXPC-1519 Series Hardware Introduction

1-8

LED Indicators and Buttons

The EXPC-1519 comes with six LED indicators and five control buttons on the bottom of the front panel.

Button Name Description

Power

Press to power on or wake up.

Press and hold for 4 seconds to power off.

Brightness Press to adjust the brightness level.

Fn Press to display function menu.

Touch Touch to enable the touchscreen function. Touch again to disable.

Info Press to display system information.

Brightness mode Press to switch between display modes.

LED Color Description

Power

Green Power is on and functioning normally.

Off Power is off.

Fiber 1/ Fiber 2

Green Fiber port is connected.

Off Fiber port is not connected.

LAN 1/ LAN 2

Green LAN port is connected.

Off LAN port is not connected.

Touch

Green Panel touch mode is enabled.

Off Panel touch mode is disabled.

Info

Red System error.

Off System is functioning properly.

Display mode

Green Displays the brightness mode.

Off Not in brightness mode range.

Description of OSD Buttons

7 6 5 4 3 2 1

1. Power button

The power button is used to power the system on or off. When the system is off, pressing the power button

will power on the system. When the system is on, you should usually shut down the system, or put the

system in sleep mode, from within the operating system. To forcibly power off the system, hold down the

power button until the system shuts down (about 4 seconds).

EXPC-1519 Series Hardware Introduction

1-9

2. Brightness +

Press this button to increase the brightness level. In total, there are 256 (0 to 255) brightness levels.

3. Brightness –

Press this button to decrease the brightness level. In total, there are 256 (0 to 255) brightness levels.

4. Fn button

Use this button to cycle between three different function modes: (1) LCD off & Touch disable, (2) OSD

Keypad Function, and (3) Max. Brightness. To select a mode, press and hold the button until the mode is

selected (approximately 3 seconds).

5. Touch button

Use the Touch button is to switch enable or disable the touch function. The Touch function is enabled when

the Touch LED is green.

EXPC-1519 Series Hardware Introduction

1-10

6. Info. button

Use this button to check the hardware status. Items that can be checked include AC Input Power, DC

Input Power, M/B Power, CPU, Memory, Chipset, and VGA. When the panel computer is working as

intended, the status of each item will be indicated as Pass or N/A. An error message will be shown when

the system is not working properly. CPU, memory, chipset, and VGA components are detected only in the

boot stage. AC/DC and motherboard Power are continuously monitored beginning with the system boot

phase. When the panel computer is connected to both AC and DC power sources, the system power will be

provided by the AC connection, in which case the DC status will be indicated as N/A.

7. Brightness mode

The Brightness Mode button can be used to make quick brightness adjustments; the options are DAY,

DUSK, and NIGHT.

2

2. Hardware Installation

In this chapter, we describe the hardware installation and interfaces of EXPC-1519 panel computers.

The following topics are covered in this chapter:



Mounting the EXPC-1519

 VESA Mounting

 Panel Mounting

 Yoke Mounting



Wiring Requirements



Connecting the Power Supply



Connecting the Interfaces



Installing the SATA Storage Drive



Installing a CFast Card



Connector Pin Assignment

 Serial Ports

 Ethernet Ports

 Terminal block of EXPC-1519-C1-S2-T / EXPC-1519-C7-S2-T



Grounding the unit



Powering on the EXPC-1519

 Real Time Clock

EXPC-1519 Series Hardware Hardware Installation

2-2

Mounting the EXPC-1519

ATTENTION

For maximum safety, at least two persons should work together to lift, place, and fasten the computer to its

mounting point. Before you lift or move the computer, first verify both it and any power to the system is turned

off. In addition, make sure you have prepared the correct screws for a wall mounting.

The EXPC-1519 supports a variety of mounting methods for different field sites. Before mounting, refer to the

following figure for the dimensions of the screw holes used for different mounting methods.

EXPC-1519 Series Hardware Hardware Installation

2-3

VESA Mounting

The EXPC-1519 has 100 x 100 mm screw holes for VESA mounting; M4 screws are recommended.

Panel Mounting

The EXPC-1519 has 8 screw holes for panel mounting. You can mount the EXPC-1519 in a cabinet using M6 size

screws.

EXPC-1519 Series Hardware Hardware Installation

2-4

Yoke Mounting

The EXPC-1519 comes with 12 screw holes for a yoke mount; you can design the yoke mount kit based on what

you need for your particular application. The screw holes are M4 size. Place the panel on the mounting kit and

fasten the computer using these holes.

Wiring Requirements

The following common safety precautions should be observed before installing any electronic device:

• Strive to use separate, non-intersecting paths to route power and networking wires. If power wiring and

device wiring paths must cross, make sure the wires are perpendicular at the intersection point.

• Keep the wires separated according to interface. The rule of thumb is that wiring that shares similar

electrical characteristics may be bundled together.

• Do not bundle input wiring with output wiring. Keep them separate.

• When necessary, it is strongly advised that you label wiring to all devices in the system.

ATTENTION

Do not run signal or communication wiring and power wiring in the same conduit. To avoid interference, wires

with different signal characteristics

(i.e., different interfaces) should be routed separately.

EXPC-1519 Series Hardware Hardware Installation

2-5

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or wiring your device.

Caution!

High Electrical Current!

Verify

the maximum possible current for each wire gauge, especially for the power cords

. Observe all electrical

codes dictating the maximum current allowable for each wire

gauge.

If the current goes above the maximum ratings

(120 W)

, the wiring could overheat, causing serious damage to

your equipment.

Caution! High

Temperatures!

Be

careful when handling the unit. When the unit is plugged in, the internal components generate a lot of

heat

which may leave

the outer casing too hot to touch.

Connecting the Power Supply

The power connector is located at the far left of the bottom panel. When wiring the machine for power, refer to

the following figure for the pinout of the power connector. Please take care to guarantee your power cable uses

the correct pinout.

Model Power connector pin assignment

EXPC-1519-C1-S1-T

EXPC-1519-C7-S1-T

EXPC-1519-C1-S2-T

EXPC-1519-C7-S2-T

DC Power (DC 24 V)

AC Power (AC 110-240 V)

EXPC-1519-C1-S3-T

EXPC-1519-C7-S3-T

AC Power

DC Power

When power has been connected, press the power button on the front panel to turn on the computer.

Connecting the Interfaces

The EXPC-1519 comes with various interfaces located on the bottom panel.

EXPC-1519-C1-S1-T / EXPC-1519-C7-S1-T

Before you use this model, you need to install your own cable gland connector. For water proofing purposes,

use the recommended cable gland connector and cable.

GND

VCC

G

N

L

EXPC-1519 Series Hardware Hardware Installation

2-6

Step 1: Remove connector panel on the rear cover.

Step 2: Remove the I/O bracket and install the M20 cable gland.

Step 3: Insert a suitable cable through the cable gland connector to extend the I/O you want to use.

Step 4: Fasten the cable gland mechanism tightly.

EXPC-1519 Series Hardware Hardware Installation

2-7

EXPC-1519-C1-S2-T/EXPC-1519-C7-S2-T

Before you use this model, you need to install your own cable gland connector. For water proof purposes, use

the cable gland connector and cable as recommended.

Step 1: Remove the connector panel on the rear cover.

Step 2: Remove the I/O bracket and install the M20 cable gland.

Step 3: Insert a suitable cable through the cable gland connector to extend the I/O you want to use on the

terminal block.

Page is loading ...

Moxa EXPC-1519 Series User manual

Moxa EXPC-1519 Series User manual

Related papers

Other documents