Holdrite HF-WS14-0100 Installation guide

Brand
Holdrite
Model
HF-WS14-0100
Type
Installation guide

This manual is also suitable for

Solutions to
Shape the World
™
Installation Instructions
HoldRite
®
HydroFlame
™
Wrap Strips
WALL INSTALLATION
1
4
Clean plastic pipe.
Apply caulking as required to close
remaining gap to both sides of wall
assembly; providing a smoke and
gas resistant seal. Spread caulking
smoothly and evenly all around.
2
Apply wrap strips around plastic pipe
for the specied number of times and
fasten tightly using adhesive tape to
both sides of wall assembly.
3
Slide wrap strips along the pipe and
into the annular space as shown.
Solutions to
Shape the World
™
Installation Instructions
HoldRite
®
HydroFlame
™
Wrap Strips
FLOOR INSTALLATION
1
4
Clean pipe.
Apply caulking as required to close
remaining gap to one side of oor
assembly; providing a smoke and
gas resistant seal. Spread caulking
smoothly and evenly all around.
2
Apply wrap strip around plastic pipe
for the specied number of times and
fasten tightly using adhesive tape to
one side of oor assembly
3
Slide wrap strip along the pipe and
into the annular space as shown.
  • Page 1 1
  • Page 2 2

Holdrite HF-WS14-0100 Installation guide

Brand
Holdrite
Model
HF-WS14-0100
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents