Solutions to
Shape the World
™
Installation Instructions
HoldRite
®
HydroFlame
™
50
WALL INSTALLATION
FLOOR INSTALLATION
1
1
Clean opening.
Clean opening.
2
2
Install pipes or cables. Install backing
material as required into annular
space as shown to both sides of wall
assembly.
Install pipes or cables. Install backing
material as required into annular
space as shown to both sides of oor
assembly.
3
3
Apply caulking as required to close
remaining gap to both sides of wall
assembly; providing a smoke and
gas resistant seal. Spread caulking
smoothly and evenly all around.
Apply caulking as required to close
remaining gap to both sides of oor
assembly; providing a smoke and
gas resistant seal. Spread caulking
smoothly and evenly all around.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Everkem FS136 Operating instructions
-
Kingspan Insulation 100000050511 Installation guide
-
Charlotte Pipe CTS 02300 1000HD Installation guide
-
Greenheck Fan DFD Series User manual
-
Greenheck 472477 Grille Access Combination Fire Smoke Dampers Operating instructions
-
-
3M VentureClad™ Insulation Jacketing Tape 1577CW-WME User guide
-
Rheem RUTG2-42(PVN)(PVP) User manual
-
WARDFlex 122 Installation guide
-
