![](//vs1.manuzoid.com/store/data-gzf/a25c4f271c44424cc6e77b5cba77663b/2/000939407.htmlex.zip/bg2.jpg)
Solutions to
Shape the World
™
Installation Instructions
HoldRite
®
HydroFlame
™
Pipe Collar
FLOOR INSTALLATION
1
4
Clean plastic pipe.
Close collar and slide along the pipe
until ush with bottom of oor.
Anchors as required.
2
Apply caulking as required to close
remaining gap to the bottom side
of oor assembly; providing a re
smoke and gas resistant seal. Spread
caulking smoothly and evenly all
around.
3
Install collar around pipe from the
bottom of oor.