2. Sterling
  3. 72110106-0

Sterling 72110106-0, Shower Receptor and Wall Surround with Backer Boards 72110106 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the Sterling 72110106-0 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
Durable high-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
Convenient shelves provide generous storage
•
Shaving ledge and foot rest added for comfort
•
Wall surround allows for attachment of grab bars
•
Tile design
•
42″ (106.7 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)
complete unit rough-in dimensions include nailing
flange
•
42″ (106.7 cm) x 34″ (86.4 cm) x 75-3/4″ (192.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
42″ (106.7 cm) SHOWER BASE AND
SURROUND WITH BACKER BOARDS
72110106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72110106 42″ (106.7 cm) shower base and wall surround with backer boards ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72112106 Back wall with backer boards ❑ 0 ❑ Other_____
72105106 End wall set with backer boards ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1065814-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum
width
Door maximum
height
72110106 38-5/8″ (98.1 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Double studding is recommended for pivot shower door
installations.
Attach grab bars at the specified backer board locations only.
10" (25.4 cm)
4" (10.2 cm)
3-1/2" (8.9 cm)
Backer board locations
Note: Right and left end walls are the
same, only mirrored.
10" (25.4 cm)
12"
(30.5 cm)
Grab Bar
18" (45.7 cm)
or 24" (61 cm)
Grab Bar
13"
(33 cm)
16"
(40.6 cm)
13"
(33 cm)
4-1/2"
(11.4 cm)
D. Drain
Cutout
15-13/16"
(40.2 cm)
21"
(53.3 cm)
42-1/8" (107 cm) Min
42-1/4" (107.3 cm) Max
3-5/16"
(8.4 cm) OD
Drain Hole
77"
(195.6 cm)
35-1/4"
(89.5 cm)
26"
(66 cm)
8"
(20.3 cm)
1-5/8" (4.1 cm)
at Midpoint
34"
(86.4 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
42"
(106.7 cm)
Back Wall
End Wall
1" (2.5 cm)
2" (5.1 cm)
12" (30.5 cm)
Grab Bar
10"
(25.4 cm)
1" (2.5 cm)
from Grout Line
3-1/2"
(8.9 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 42″ (106.7 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2
1065814-4-
C
/