AIC SB202-LB User manual

UM_Libra_v4.1_041719

Libra

Server Motherboard

User's Manual

Content

Table of Contents

Preface �� i

Safety Instructions �� ii

About This Manual �� iii

Chapter 1� Product Features ��1

1.1 Componenets ...........................................................................................1

1.2 Specications ..........................................................................................2

1.3 Feature .....................................................................................................3

Chapter 2� Hardware Setup ��4

2.1 Central Processing Unit (CPU) ................................................................4

2.1.1 Removing the processor ....................................................................................4

2.1.2 Installing the processor ......................................................................................6

2.2 System Memory .....................................................................................10

2.2.1 DIMM Installation Order .................................................................................. 11

2.2.2 DIMM Installation ............................................................................................ 13

Chapter 3� Motherboard Settings �� 14

3.1 Motherboard Block Diagram ................................................................. 14

3.2 Content List ............................................................................................ 15

3.3 Motherboard Layout ..............................................................................16

3.4 Connector and Jumper ..........................................................................17

3.5 System LED ............................................................................................25

3.5.1 Internal LED ...................................................................................................... 25

Chapter 4. BIOS Conguration Settings �� 26

4.1 Navigation Keys .....................................................................................26

4.2 BIOS Setup .............................................................................................27

4.2.1 BIOS Menu ....................................................................................................... 27

4.2.2 BIOS Basic Utility ............................................................................................. 27

4.2.3 BIOS Update ..................................................................................................... 30

4.3 Main ........................................................................................................ 32

4.3.1 Main .................................................................................................................. 32

4.4 Advanced ................................................................................................33

4.4.1 Peripheral Conguration ................................................................................. 33

4.4.2 PCH SATA Conguration ................................................................................ 34

4.4.3 PCH SSATA Conguration ............................................................................... 34

4.4.4 Video Conguration ......................................................................................... 34

4.4.5 USB Conguration .......................................................................................... 35

4.4.6 PCH Chipset Conguration ............................................................................ 35

4.4.7 Processor Conguration ................................................................................. 35

4.4.8 Advanced Power Management Conguration .............................................. 36

4.4.9 Common RefCode Conguration .................................................................... 36

4.4.10 QPI Conguration ......................................................................................... 37

4.4.11 Memory Conguration .................................................................................. 38

4.4.12 IIO Conguration ............................................................................................ 39

4.4.13 Console Redirection ...................................................................................... 41

4.4.14 System Event Log .......................................................................................... 41

4.4.15 SPS ME ICC Conguration ............................................................................ 41

4.4.16 H2O IPMI Conguration ................................................................................ 41

4.4.17 OEMBoard Function ....................................................................................... 42

4.5 Security ..................................................................................................43

4.5.1 Set Supervisor password ................................................................................ 43

4.6 Power......................................................................................................44

4.6.1 Power ............................................................................................................... 44

4.7 Boot ........................................................................................................45

4.7.1 Boot .................................................................................................................. 45

Chapter 5. BMC Conguration Settings �� 47

5.1 Method 1 (Use the BIOS Setup) ............................................................47

5.2 Method 2 (Use a Dos Tool - Syscheck) ................................................48

5.3 Connect to BMC .....................................................................................49

5.4 Web UI ....................................................................................................50

5.4.1 Dashboard ........................................................................................................ 50

5.4.2 Field Replaceable Unit(FRU) ........................................................................... 51

5.4.3 Server Health ................................................................................................... 52

5.4.4 Conguration ................................................................................................... 53

5.4.5 Remote Control ................................................................................................ 57

5.4.6 Auto Video Recording ..................................................................................... 59

5.4.7 Maintenance .................................................................................................... 60

5.5 Updating BMC Firmware .......................................................................62

Chapter 6� Technical Support �� 63

Content

This document contains proprietary information about

AIC products and is not to be disclosed or used except in

accordance with applicable agreements.

Document Release History

Release Date Version Update Content

September

2014

1 User's Manual release to public.

August

2015

2 Specication update

November

2017

3 Grammar update

August

2018

4 Content update

April

2019

4.1 New Cover

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static, recording

or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to change

without notice.

Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Disclaimer

AIC shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the

extent permitted by law, neither AIC or its afliates, subcontractors or suppliers will be

liable for incidental, special or consequential damages including downtime cost; lost

profits; damages relating to the procurement of substitute products or services; or

damages for loss of data, or software restoration. The information in this document

is subject to change without notice.

Instruction Symbols

Special attention should be given to the instruction symbols below.

NOTE

This symbol indicates that there is an explanatory or

supplementary instruction.

CAUTION

This symbol denotes possible hardware impairment. Upmost

precaution must be taken to prevent serious harware damage.

WARNING

This symbol serves as a warning alert for potential body

injury. The user may suffer possible injury from disregard or

lack of attention.

Preface

i

When installing, operating, or performing maintenance on this equipment, the following

safety precautions should always be observed in order to reduce the risk of re, electric

shock, and personal injury.

Read and understand all instructions.

Observe warnings and instructions marked on the product.

• For proper mounting instructions, please consult the User’s Manual provided with this

product.

• Do NOT place this product on an unstable cart, stand, table or uneven surface that

might cause the product to fall and sustain serious damage.

• Only install the equipment identified in the User’s Manual. Use of other equipment

could cause improper connection of circuitry and may result in re or personal injury.

• This product should only be operated with the type of power source indicated on the

marked label. If you are uncertain about which type of power supply is used in your

area, consult your dealer or local Power Company.

• Disconnect the power supply module before removing power from the system. Unplug

this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do

not use liquid cleaners or aerosol cleaners.

• Do not use this product near a water source, such as a faucet.

• Never spill liquids of any kind on this product.

• Never shove objects of any kind into this product’s open slots, as they may touch

dangerous voltage points or short out parts and could result in re or electric shock.

• Do not block or cover slots and openings in this unit, as they were made for ventilation

and prevent this unit from overheating. Do not place this product in a built-in

installation unless proper ventilation is available.

• Do not disassemble this product. This product should only be taken apart by trained

personnel. Opening or removing covers and circuit boards may expose you to electric

shock or other risks. Incorrect reassembly can also cause electric shock when the

unit is subsequently used.

• Risk of explosion is possible if battery is replaced with an incompatible type. Dispose

of used batteries accordingly.

• This product is equipped with a three-wire grounding type plug, a plug with a third

(grounding) pin. As a safety feature, this plug is intended to t only into a grounding

type power outlet. If you are unable to insert the plug into the outlet, contact your

electrician to replace the outlet. Do not remove the grounding type plug or use a

3-Prong To 2-Prong Adapter to circumvent the safety feature; doing so may result in

electric shock and/or damage to this product.

CAUTION

There will be a risk of explosion if battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions. After performing any installation or

servicing, make sure the enclosure is correct in position before turning on the power.

Safety Instructions

ii

Thank you for selecting and purchasing the Libra Serverboard.

This user's manual is provided for professional technicians to perform easy hardware

setup, basic system congurations, and quick software startup. This document pellucidly

presents a brief overview of the product design, device installation, and rmware settings

for the Libra motherboard. For the latest version of this user's manual, please refer to the

AIC website: https://www.aicipc.com/en/productdetail/124.

Chapter 1 Product Features

This chapter delivers the overall layout of the product, including the fundamental

components on the motherboard, design specications, and noteworthy features. Libra

is an ideal server grade motherboard that is specifically designed to accommodate

diverse enterprises for managing heavy workloads, databases, nearline applications,

and cloud deployments. This product supports the Intel® Xeon® Processors E5-2600 v3

and v4 product family and Socket R3 (FC:GA2011-3) with a memory support of 16 DDR4

2133/2400 MHz DIMM accross 4 channels per CPU.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the CPU (Central

Processing Unit) and memory module. Utmost caution for proceeding to set up the

hardware is highly advised. The components on the motherboard are highly fragile and

vulnerable to exterior influence. Do not attempt to endanger the device by placing the

device in a potentially unstable or hazardous surroundings, including positioning the

device on an uneven grounds or humid environments.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the server motherboard, including

multifarious connectors, jumpers, and LED descriptions. These descriptions assist users

to congure different settings and functions of the motherboard, as well as to conrm the

location of each connector and jumper.

Chapter 4 BIOS Conguration Settings

This chapter introduces the key features of BIOS, including the descriptions and option

keys for diverse functions. These details provide users to effortlessly navigate and

congure the input/output devices.

Chapter 5 BMC Conguration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on logging

into the web page and assorted denitions. These descriptions are helpful in conguring

various functions through Web GUI without entering the BIOS setup. For more information

of BMC configurations, please refer to BMC (Aspeed2400) User's Manual for a more

detailed description.

Chapter 6 Technical Support

For more information or suggestion, please contact the nearest AIC corporation

representative in your district or visit the AIC website: http://www.aicipc.com/en. It is our

greatest honor to provide the best service for our customers.

About This Manual

iii

1

Chapter 1. Product FeaturesLibra User Manual

Product features and specications are subject to change without notice.

Spica User Manual

Chapter 1� Product Features

1�1 Componenets

8 x DIMM Slots to Support 4 Channels,

DDR4 RDIMM, 2 DIMMs per Channel, (CPU1)

8 x DIMM Slots to Support 4 Channels,

DDR4 RDIMM, 2 DIMMs per Channel, (CPU0)

2 x 6-pin 2.54mm Fan Header

14-pin 12V

Power Connector

Socket R3 (FCLGA2011-3) (CPU1)

to Support Intel

®

Xeon

®

Processor

E5-2600 v3 and v4 Product Family

Socket R3 (FCLGA2011-3) (CPU0)

to Support Intel

®

Xeon

®

Processor

E5-2600 v3 and v4 Product Family

4-pin 2.54mm

Fan Header

4-pin 2.54mm

Fan Header

Insyde UEFI BIOS

(SPI Serial Flash EEPROM)

4 x 6-pin

2.54mm

Fan Header

8-pin 12V

Power Connector

8 x SATA3

Connectors

20-pin USB 3.0

Pin-header

SSI Front Panel Header

Intel

®

C612 Chipset

2 x SFF-8643

Connectors

Broadcom SAS3008

SAS/SATA I/O Controller

1 x NGFF(M.2)

M-Key(2280, 2242

by additional bracket)

support SATA/PCIe x4

8-pin 12V Power Connector

VGA Pin-header

PCIe x8 Slot 6 from CPU1

PCIe x16 Slot 5 from CPU1 (NTB)

PCIe x8 Slot 4 from CPU1

PCIe x8 Slot 2 from CPU1

PCIe x16 Slot 1 from CPU0

PCIe x16 Slot 3 from CPU0 (NTB)

Intel

® X540 Dual Port 10 GbE

Controller (Optional:

Intel

® I350

Dual Port GbE Controller)

Aspeed AST2400 Advanced

PCIe Graphics & Remote

Management Processor

2

Chapter 1. Product FeaturesLibra User Manual

1.2 Specications

System

Processor

Support

Two Intel® Xeon® Processors E5-2600 v3 and

v4 product family

CPU TDP

145W

QPI Speeds

9.6 GT/s, 8 GT/s, 7.2 GT/s

Socket Type

Socket R3 (FCLGA2011-3)

System

Chipset

Intel® C612 Chipset

System

Memory

• 4 x memory channels per CPU socket,

2 x DIMMs per channel (2DPC)

• 16 x DIMM slots support:

DDR4 2400/2133MHz RDIMM/LRDIMM

- Up to 128GB RDIMM SRx4

- Up to 512GB RDIMM DRx4

- Up to 1024GB LRDIMM QRx4

- Up to 2048GB LRDIMM 3DS 8Rx4

• Supports NVDIMM feature

Expansion

Slots

• 3 x PCIe v3.0 x16 slots

• 3 x PCIe v3.0 x8 slots

• 1 x NGFF(M.2) M Key(2280, 2242 by

additional bracket) support SATA/PCIe x4

System BIOS

BIOS Type

• Insyde UEFI BIOS

• SPI (Serial Peripheral Interface)

FLASH Interface

BIOS

Features

• ACPI

• PXE

• WOL

• AC loss recovery

• IPMI KCS interface

• SMBIOS

• Serial console redirection

• BIOS Recovery Mode

• SRIOV

• iSCSI

• TPM

• PCIe Hotplug

On-board

Devices

SATA/SAS

• Built-in SATA controller with RAID support on

Intel® C612 Chipset

• Broadcom SAS3008 SAS/SATA I/O Controller,

PCIe v3.0

IPMI

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN,

Serial over LAN

Network

Controller

• Intel® Ethernet Controller X540-BT2 dual port

10GbE,10GBASE-T, PCIe v2.1, x8

Optional : Intel® Ethernet Controller I350-BT2,

dual port GbE, PCIe v2.0

• Intel® Ethernet Controller I210-AT,

single port GbE, PCIe v2.1

• Intel® Ethernet Network Connection I217-LM,

single port GbE, 1Gbps

• Realtek RTL8201EL single port 10/100

Mbps Ethernet PHY for dedicated BMC

management port

Graphics

Aspeed AST2400 Advanced PCIe Graphics &

Remote Management Processor

• PCIe VGA/2D Controller

• 1920x1200@60Hz 32bpp

Input/Output

SATA

8 x SATA3 ports

SAS

(Optional)

2 x Mini-SAS HD (SFF-8643) support up to

8 ports SAS 12Gb/s

LAN

• 2 x 10GbE RJ45 (optional: 2 x GbE RJ45)

• 2 x GbE internal pin-headers

• 1 x 10/100M RJ45 dedicated to BMC

management

USB

• 2 x USB 3.0 Type A connectors

• 1 x USB internal pin-header to support

2 x USB3.0/USB2.0

VGA

• 1 x external VGA port

• 1 x internal VGA pin-header

(share with external VGA port)

Serial Port

• 1 x external DB-9 COM port

• 1 x internal DB-9 serial pin-header

Others

Debug display pin-header, GPIO port

IPMB pin-header, Chassis intrusion

3

Chapter 1. Product FeaturesLibra User Manual

The Libra series server board, standard EATX form factor, offers compelling performance

and improved power efficiency, which is optimized for efficient performance platforms

(storage, security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-2600 v3 and v4 product family, fully

integrated microarchitecture, the Libra series server board delivers unmatched

performance, providing 2S support with four channels of DDR4 2400/2133MHz per

socket, dual 10GBase-T, and optional Broadcom SAS 3008 IOC onboard.

Featured with ground breaking technologies including Intel® Next Generation

Microarchitecture and Instruction Set (including AVX 2.0), Energy Efficient Turbo,

Increased Intel® QPI link speeds up to 9.6GT/s and DDR4 memory, the Libra series server

board enables next generation server solutions with an incredible leap in performance in

a standard EATX form factor platform.

•

Supports two Intel® Xeon® Processors E5-2600 v3 and v4 product family for

signicantly increased server performance

•

Supports 16 DDR4 DIMM slots for maximum memory performance

•

5+ years of product life cycle (based on chipset roadmap)

•

Onboard Baseboard Management Controller for system management and IPMI control

•

6 x PCI Express v3.0 slots

•

Dual port 10GBase-T RJ45 plus dedicated 10/100 RJ45 for management

•

Broadcom SAS3008 SAS/SATA I/O Controller for 12Gb/s SAS

1�3 Feature

4

Chapter 2. Hardware Setup

Libra User Manual

2�1 Central Processing Unit (CPU)

2�1�1 Removing the processor

Step 1 Remove the heatsink. The heatsink is attached to the server board or

-processor socket with captive fasteners. Use a #2 Phillips* screwdriver

to loosen the screws x 4 located on the heatsink corners diagonally using

the following procedure (1a) to (1b).

(1a) Use a #2 Phillips* screwdriver and start with screw 1 and loosen it

by giving it two rotations and stop (see letter A).

CAUTION

Do not full loosen.

(1b) Proceed to screw 2 and loosen it by giving it two rotations and

stop (see letter B). Similarly, loosen screws 3 and 4. Repeat steps A and

B by giving each screw two rotations each time until all the screws are

loosened.

(1c) Lift the heatsink upward (see letter C).

Chapter 2� Hardware Setup

R

E

MOVE

REMOV

E

LGA20

11-3

** SUPPLIER IDENTI

FI

C

A

TION HERE **

INSTALL PROCESSOR B

EFOR

E

REMOVING COVER

SA

V

E AN

D

REPLACE

COVER

IF P

ROCESSOR IS REMOVE

D

Processor

Socket

2

3

1

4

A

B

C

5

Chapter 2. Hardware SetupLibra User Manual

Step 2 Unlatch the CPU Load Plate by following procedures (2a) to (2b).

(2a) Push the lever handle labeled “OPEN 1st” (see letter A) down and towards

the CPU socket. Rotate the lever handle upward.

(2b) Repeat the steps for the second lever handle (see letter B).

Step 3 Open the load plate.

(3a) Rotate the right lever handle down until it releases the Load Plate (see

letter A).

(3b) While holding down the lever handle, lift open the Load Plate with your

hand (see letter B).

Step 4 Remove the processor from the socket.

NOTE

-Remove the processor by carefully lifting it out of the socket. Take care not to drop

the processor and not touching any pins inside the socket.

-Install the socket cover if a replacement processor is not going to be installed.

REMOVE

LGA2011-3

** SUPPLIER IDENTIFIC

ATION HERE **

INSTALL PROCESSOR BEFORE

REMOVING COVER

SAVE AND REPLACE COVER

IF PROCESSOR IS REMOVED

A

REMOVE

LGA2011-3

** SUPPLIER IDENTIFIC

ATION HERE **

INSTALL PROCESSOR BEFORE

REMOVING COVER

SAVE AND REPLACE COVER

IF PROCESSOR IS REMOVED

B

REMOVE

REM

OVE

LGA2011-3

** S

UPPLIER ID

ENT

IFIC

ATION HERE

**

INSTALL PROCESSOR BEFORE

REMOVING COVER

SAVE AND REPLACE COVER

IF PROCESSOR IS REMOVED

A

6

Chapter 2. Hardware Setup

Libra User Manual

2�1�2 Installing the processor

CAUTION

Processor must be appropriate: you may damage the server board if you install a

processor that is inappropriate for your server.

CAUTION

ESD and handling processors: reduce the risk of electrostatic discharge (ESD) damage

to the processor by doing the following:

(1) Touch the metal chassis before touching the processor or server board. Keep part

of your body in contact with the metal chassis to dissipate the static charge while

handling the processor.

(2) Avoid moving around unnecessarily.

7

Chapter 2. Hardware SetupLibra User Manual

Step 1 Remove the processor from its package by following procedures (1a) to

(1b).

(1a) Carefully remove the protective cover from the backside of the

CPU. Take care not to touch any CPU contacts (see letter A).

(1b) Orient the processor with the socket so that the processor cutouts

match the four orientation posts on the socket (see letter B). Verify

the location of a gold key at the corner of the processor (see letter C).

Carefully place (Do NOT drop) the CPU into the socket.

CAUTION

The pins inside the CPU socket are extremely sensitive other than the CPU. No object

should make contact with the pins inside the CPU socket. A damaged CPU socket pin

may render the socket inoperable and will produce erroneous CPU or other system

errors if used.

CAUTION

The underside of the processor has components that may damage the socket pins if

installed improperly. The processor must align correctly with the socket opening before

installation. Do not drop the processor into the socket.

CAUTION

When possible, a CPU insertion tool shoule be used when installing the CPU.

A

C

B

8

Chapter 2. Hardware Setup

Libra User Manual

Step 2 Remove the socket cover from the load plate.

NOTE

The socket cover should be saved and re-used should the processor need to be

removed at any time in the furture.

Step 3 Close the load plate.

Step 4 Secure the Load Plate.

(4a) Push downward on the locking lever on the CLOSE 1st side (see letter A).

Slide the tip of the lever under the notch in the load plate (see letter B).

Make sure the load plate tab engages under the socket lever when fully

closed.

(4b) Repeat the steps to latch the locking lever on the other side (see letter C).

Latch the levers in the order as demonstrated.

Save the

protective

cover.

A

B

C

9

Chapter 2. Hardware SetupLibra User Manual

Step 5 Installing the heatsink on top of the processor.

NOTE

The processor heatsink for CPU1 and CPU2 is different.. FXXCA91X91HS is for CPU1,

while FXXEA91X91HS2 is for CPU2. Mislocating the heatsink will cause serious thermal

damage.

(5a) If present, remove the protective lm covering the thermal interface

material on the bottom side of the heatsink (see letter A).

(5b) Align the heatsink ns to the front and back of the chassis for

correct airflow. The airflow goes from front-to-back of the chassis (see

letter B).

(5c) Each heatsink has four captive fasteners and should be tightened

diagonally using the following procedure:

(5c-1) Using a #2 Phillips* screwdriver, start with screw 1 and

engage screw threads by giving it two rotations and stop (see

letter C) (Do not fully tighten).

(5c-2) Proceed to screw 2 and engage screw threads by giving it

two rotations and stop (see letter D). Similarly, engage screws 3

and 4.

(5c-3) Repeat steps C and D by giving each screw two rotations

each time until each screw is lightly tightened up to a maximum

of 8 inch-lbs torque (see letter E).

C

Processor

Socket

AIRFLOW

Chassis Front

2

3

1

4

A

B

TIM

D

CAUTION:

Do not over-tighten fasteners.

E

10

Chapter 2. Hardware Setup

Libra User Manual

This server board supports up to sixteen DDR4 1333/1600/1866/2133 Registered ECC

SDRAM(RDIMM) / Load-Reduced DIMM (LRDIMM).

NOTE

Slot 1/ Slot 3 is available only when JCPU0 processor is installed.

Slot 2/ Slot 4/ Slot 5/ Slot 6 is available only when JCPU1 processor is installed.

2�2 System Memory

JDIMME0

JDIMME1

JDIMMF0

JDIMMF1

JCPU1

JCPU0

JDIMMH1

JDIMMH0

JDIMMG1

JDIMMG0

JDIMMC0

JDIMMC1

JDIMMD0

JDIMMD1

JDIMMB1

JDIMMB0

JDIMMA1

JDIMMA0

11

Chapter 2. Hardware SetupLibra User Manual

2�2�1 DIMM Installation Order

Popoluate the DIMMs slots in the following order.

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

DIMM Numbers DIMM Arrangement

2 DIMMs

CPU1 CPU0

JDIMM_G0 JDIMM _A0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

4 DIMMs

CPU1 CPU0

JDIMM_G0 JDIMM_A0

JDIMM_H0 JDIMM_B0

6 DIMMs

CPU1 CPU0

JDIMM_G0 JDIMM_A0

JDIMM_H0 JDIMM_B0

JDIMM_E0 JDIMM_C0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

8 DIMMs

CPU1 CPU0

JDIMM_G0 JDIMM_A 0

JDIMM_H0 JDIMM_B0

JDIMM_F0 JDIMM_D 0

JDIMM_E0 JDIMM_C 0

12

Chapter 2. Hardware Setup

Libra User Manual

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

JDIMMF1

JDIMMD1

JDIMMC1

JDIMMC0

JDIMMD 0JDIMMF0

JDIMME1

JDIMME0

JDIMMG0

JDIMMG1

JDIMMH0

JDIMMH1

JDIMMA0

JDIMMA1

JDIMMB0

JDIMMB1

CPU1

CPU0

CPU1 CPU0

JDIMM_ G0 JDIMM_A0

JDIMM_ G1 JDIMM_A1

JDIMM_ H0 JDIMM_B0

JDIMM_ F0 JDIMM_D0

JDIMM_ E0 JDIMM_C0

10 DIMMs

CPU1 CPU0

JDIMM_ G0 JDIMM_A0

JDIMM_ G1 JDIMM_A1

JDIMM_ H0 JDIMM_B0

JDIMM_ H1 JDIMM_B1

JDIMM_ F0 JDIMM_D0

JDIMM_ E0 JDIMM_C0

12 DIMMs

CPU1 CPU0

JDIMM_ G0 JDIMM_A0

JDIMM_ G1 JDIMM_A1

JDIMM_ H0 JDIMM_B0

JDIMM_ H1 JDIMM_B1

JDIMM_ F0 JDIMM_D0

JDIMM_ E1 JDIMM_C1

JDIMM_ E0 JDIMM_C0

14 DIMMs

CPU1 CPU0

JDIMM_ G0 JDIMM_A0

JDIMM_ G1 JDIMM_A1

JDIMM_ H0 JDIMM_B0

JDIMM_ H1 JDIMM_B1

JDIMM_ F1 JDIMM_D1

JDIMM_ F0 JDIMM_D0

JDIMM_ E1 JDIMM_C1

JDIMM_ E0 JDIMM_C0

16 DIMMs

Page is loading ...

AIC SB202-LB User manual

AIC SB202-LB User manual

Related papers

Other documents