Tyan S7063 Quick Installation Manual
- Category
- Motherboards
- Type
- Quick Installation Manual
1 2 3
Top View
Without jumper
Jumper
Pins
1 2 3
Top View
With jumper installed
on pins 1 and 2
1 2
1
SATA Cable x 2
mini-SAS to SATAx4 cable x 1
Quick Installation Guide x 1
Apply the thermal
grease.
2
Install the CPU heatsink.
3
1 2 3
Secure the heatsink screws.
4
Connect the
heatsink fan cable.
Unlock the clips. Insert the memory module.
Lock the clips.
Ethernet
(LAN2)
Ethernet
(LAN1)
Ethernet
(LAN3)
Note: Please save and replace the CPU
protection cap when returning the server board
for service.
Server Board x 1
USB 2.0
DOA/RMA Reminder
Phillips Screwdriver
Anti-Static Wrist Strap
Flat-head Screwdriver
Insert the server board into the chassis.
Attach the server board to the chassis by securing
the screws on the designated locations.
To avoid damage,
Note:
do not use torque force
greater than 7kgf/cm
(6.09 lb/n) on each screw.
Read Me First
Package Content (Retail Box Only)
Tools prepared
Motherboard Placement
1. The motherboard User’s Manual is available for download from our Web site at http://www.tyan.com. Make sure to read all
precautions and instructions before you start installing the server board.
2. Refer all servicing to qualified personnel to avoid the risk of damage to the server board.
3. Exercise normal ESD (Electrostatic Discharge) procedures during system integration. TYAN/MiTAC recommends wearing
gloves and an anti-static wrist strap to avoid possible damage to the equipment.
4. Current processor socket design places the pins on the motherboard instead of the processor itself. Exercise extreme
aution when installing the processors as the manufacturer’s warranty does not cover damage inflicted upon the mother-
board, including damage to the CPU sockets.
Quick Installation
Guide
CONNECTORS
SLOTS
A CPU1 DIMM Slots (Channel A/B)
B CPU1 DIMM Slots (Channel C/D)
C CPU0 DIMM Slots (Channel A/B)
D CPU0 DIMM Slots (Channel C/D)
E PCIE Slots (x 8)
JUMPER
Name Description
a Clear CMOS Jumper
b ME Recovery Mode Jumper
c BIOS Recovery Jumper
d SPI Write Protect Pin Header
e BMC Debug Pin Header
Jumper Cap On/Off
1
Install the Server Board
2
Install the Processor
3
Install the CPU Heatsink
4
Install the Memory
5
Install the Power Cable
Locate the external I/O port
Driver's and Utilities CD x 1
1. USB2.0 ports and LAN Port #3(LAN3)
shared with IPMI port
2. Type-A USB Connector
3. VGA Port /COM Port
4. Port 80 Header
5. ID LED Button
6. LAN port#2(LAN2)
7. LAN port#1(LAN1)
8. BIOS
9. BMC
10. PCH Software RAID KEY
11. ID LED
12. Battery
13. Power Button
14. Reset Button
15. Flash Security Override Pin Header
16. LSI IMR KEY
17. USB Front Panel Header(blue)
18. LAN1 LED Header
19. SATA3.0 Connector (SATA1)
20. SATA3.0 Connector (SATA0)
21. SATA SGPIO Pin Header
22. SATA2-5
23. SAS4-7
24. SAS0-3
25. LSI 2308 Enable/Disable Jumper
26. Front Panel Header
27. LAN2 LED Header
28. CPU0 FAN Connector
29. Chassis Intrusion Header
28
30
29
31
35
32
33
34
38 37 36394243 4041
1918 20 22 23 24 25 26 2721
b
a
e
d
c
Remove the CPU
protective cap.
1
Open the socket
lever.
2
Open the other socket
lever.
3
Close the socket
lever.
7
Close the other socket
lever.
8
Install the processor
and make sure the
gold arrow is located in
the right direction.
5
6
Close the CPU
socket cover.
4
Open the CPU
socket cover.
E
D
A
B
C
CPU 1
CPU 0
1
3
6
5
11
7
8
9
16
2
17
15
14
13
12
10
4
shared with IPMI
ID_LED
VGA
COM1
ID LED button
30. SYS_FAN_3 Connector
31. CPU Socket (CPU0)
32. SYS_FAN_2 Connector
33. SYS_FAN_1 Connector
34. 8-pin Power Connector(PW3)
35. CPU Socket (CPU1)
36. CPU1 FAN Connector
37. SYS_FAN_4 Connector
38. 8-pin Power Connector(PW2)
39. 24-pin Power Connector(PW1)
40. SYS_FAN_5 Connector
41. PSMI Connector
42. Front Fan Connector
43. SAS SMB Pin Header
56 18 T4 75 000 1
S7063 Quick Installation Guide
Document # D2224-100/ Revision 1.0
-
1
Tyan S7063 Quick Installation Manual
- Category
- Motherboards
- Type
- Quick Installation Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Tyan GT24B-B7076 Service Engineer's Manual
-
-
-
-
-
-
-
-
-