AIC FB128-LX User manual

UM_FB128-LX_v1.1_102720

FB128-LX

Server Barebone

User's Manual

Content

Table of Contents

Preface �� i

Safety Instructions �� ii

About This Manual ��iv

Chapter 1� Product Features �� 1

1�1 Box Contents �� 1

1�2 Specifications �� 2

1�3 Feature ��3

Chapter 2� Hardware Setup �� 6

2�1 Central Processing Unit Setup �� 6

2.1.1 Processor Installation ......................................................................................... 6

2�2 System Memory �� 9

2.2.1 Placement ............................................................................................................9

2.2.2 DIMM Population ..............................................................................................10

2.2.3 Installation .........................................................................................................13

2�3 Top Cover ��14

2�4 Power Supply Unit Module �� 15

2�5 Fan Module �� 16

2�6 Air Duct �� 17

2�7 OCP Card/M�2 Card Module �� 18

2�8 PCIe Card Module �� 19

2�9 Solid State Drive Module �� 20

2�10 Slide Rail Installation �� 21

Chapter 3� Hardware Settings �� 24

3�1 Motherboard �� 24

3.1.1 Block Diagram ...................................................................................................24

3.1.2 Content List .......................................................................................................25

3.1.3 Placement .......................................................................................................... 27

3.1.4 Connector ..........................................................................................................28

3.1.5 Jumper ............................................................................................................... 35

3�2 System LED Indicator �� 37

3.2.1 Front Panel LED .................................................................................................37

3.2.2 Internal LED .......................................................................................................38

3�3 SSD Backplane �� 39

3.3.1 Placement .......................................................................................................... 39

3.3.2 Connector and Switch ....................................................................................... 39

Chapter 4� BIOS Configuration Settings �� 40

4�1 Navigation Keys �� 40

4�2 BIOS Menu �� 41

4�3 Main �� 42

4.3.1 Main ...................................................................................................................42

4�4 Advanced �� 43

4.4.1 Peripheral Configuration ...................................................................................43

Content

4.4.2 Video Configuration .............................................................................................43

4.4.3 OEMBoard Function .............................................................................................43

4.4.4 SIO AST2500 ........................................................................................................44

4.4.5 Socket Configuration ...........................................................................................44

4.4.6 ME Configuration .................................................................................................50

4.4.7 PCH Configuration ...............................................................................................51

4.4.8 H2O IPMI Configuration ....................................................................................... 52

4.4.9 APEI Configuration ............................................................................................... 52

4.4.10 Console Redirection ........................................................................................... 52

4.4.11 H2O Event Log Config Manager ........................................................................ 53

4.4.12 H2oUve Configuration .......................................................................................53

4�5 Security �� 54

4.5.1 Security .................................................................................................................54

4�6 Power �� 55

4.6.1 Power ....................................................................................................................55

4�7 Boot �� 56

4.7.1 Boot ....................................................................................................................... 56

4�8 Exit �� 57

4.8.1 Exit.........................................................................................................................57

Chapter 5� BMC Configuration Settings �� 58

5�1 Login �� 58

5�2 Web GUI �� 59

5.2.1 Menu Bar ...............................................................................................................59

5.2.2 User Information and Quick Button ....................................................................60

5.2.3 Dashboard ............................................................................................................61

5.2.4 Sensor ...................................................................................................................61

5.2.5 FRU Information ...................................................................................................62

5.2.6 Logs and Reports .................................................................................................62

5.2.7 Settings .................................................................................................................63

5.2.8 Remote Control ....................................................................................................64

5.2.9 Power Control .......................................................................................................68

5.2.10 Maintenance ....................................................................................................... 69

5.2.11 Sign out ............................................................................................................... 70

Chapter 6� Technical Support �� 71

Document Release History

Release Date Version Update Content

April

2020

1 User's Manual release to public.

October

2020

1.1 HW update.

This document contains proprietary information about

AIC® products and is not to be disclosed or used except in

accordance with applicable agreements.

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static, recording

or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to change

without notice.

Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Disclaimer

AIC® shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the extent





damages relating to the procurement of substitute products or services; or damages

for loss of data, or software restoration. The information in this document is subject to

change without notice.

Instruction Symbols

Special attention should be given to the instruction symbols below.

NOTE

This symbol indicates that there is an explanatory or

supplementary instruction.

CAUTION

This symbol denotes possible hardware impairment. Upmost

precaution must be taken to prevent serious harware damage.

WARNING

This symbol serves as a warning alert for potential body

injury. The user may suffer possible injury from disregard or

lack of attention.

Preface

i

Before getting started, please read the following important cautions:

• All cautions and warnings on the equipment or in the manuals should be noted.

• Most electronic components are sensitive to electrical static discharge. Therefore, be

sure to ground yourself at all times when installing the internal components.

• Use a grounding wrist strap and place all electronic components in static-shielded

devices. Grounding wrist straps can be purchased in any electronic supply store.

• Be sure to turn off the power and then disconnect the power cords from your system

before performing any installation or servicing. A sudden surge of power could

damage sensitive electronic components.

• Do not open the system’s top cover. If opening the cover for maintenance is a must,

only a trained technician should do so. Integrated circuits on computer boards are

sensitive to static electricity. Before handling a board or integrated circuit, touch

an unpainted portion of the system unit chassis for a few seconds. This will help to

discharge any static electricity on your body.

• Place this equipment on a stable surface when install. A drop or fall could cause injury.

• Please keep this equipment away from humidity.

• Carefully mount the equipment into the rack, in such manner, that it won’t be

hazardous due to uneven mechanical loading.

• This equipment is to be installed for operation in an environment with maximum

ambient temperature below 35°C.

• The openings on the system are for air convection to protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

• Never pour any liquid into ventilation openings. This could cause fire or electrical

shock.

• Make sure the voltage of the power source is within the specification on the label

when connecting the equipment to the power outlet. The current load and output

power of loads shall be within the specification.

• This equipment must be connected to reliable grounding before using. Pay special

attention to power supplied other than direct connections, e.g. using of power strips.

• Place the power cord out of the way of foot traffic. Do not place anything over the

power cord. The power cord must be rated for the product, voltage and current marked

on the product’s electrical ratings label. The voltage and current rating of the cord

should be greater than the voltage and current rating marked on the product.

• If the equipment is not used for a long time, disconnect the equipment from mains to

avoid being damaged by transient over-voltage.

• Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

Safety Instructions

ii

• If one of the following situations arise, the equipment should be checked by service

personnel:

1. The power cord or plug is damaged.

2. Liquid has penetrated the equipment.

3. The equipment has been exposed to moisture.

4. The equipment does not work well or will not work according to its user manual.

5. The equipment has been dropped and/or damaged.

6. The equipment has obvious signs of breakage.

7. Please disconnect this equipment from the AC outlet before cleaning. Do not

use liquid or detergent for cleaning. The use of a moisture sheet or cloth is

recommended for cleaning.

• Module and drive bays must not be empty! They must have a dummy cover.

CAUTION

The equipment intended for installation should be placed in Restricted Access

Location.

CAUTION

There will be a risk of explosion if battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions. After performing any installation or

servicing, make sure the enclosure is correct in position before turning on the power.

CAUTION

This unit may have more than one power supply. Disconnect all power sources before

maintenance to avoid electric shock.

iii

iv

About This Manual

Thank you for selecting and purchasing the FB128-LX.

This user's manual is provided for professional technicians to perform easy hardware

setup, basic system configurations, and quick software startup. This document pellucidly

presents a brief overview of the product design, device installation, and firmware settings

for FB128-LX. For the latest version of this user's manual, please refer to the AIC® website:

https://www.aicipc.com/en/productdetail/51120.

Chapter 1 Product Features

FB128-LX is a flexible storage server barebone that is specifically designed to

accommodate diverse corporations and enterprises for managing heavy workloads and

multiple applications.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the hardware in this

product. Utmost caution for proceeding to set up the hardware is highly advised. Most of

the components are highly fragile and vulnerable to exterior influence. Do not endanger the

device by placing the device in an unstable environment.

Chapter 3 Hardware Settings

This chapter provides information for connectors, jumpers, and LED descriptions. These

descriptions assist users to configure different settings and functions of the motherboard,

as well as to confirm the location of each connector and jumper.

Chapter 4 BIOS Configuration Settings

This chapter introduces the key features of BIOS, including the descriptions and option

keys for diverse functions. These details provide users to effortlessly navigate and

configure the input/output devices.

Chapter 5 BMC Configuration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on logging

into the web page and assorted definitions. These descriptions are helpful in configuring

various functions through Web GUI without entering the BIOS setup. For more information

of BMC configurations, please refer to IPMI BMC (Aspeed AST2500) User's Manual for a

more detailed description.

Chapter 6 Technical Support

For more information or suggestion, please contact the nearest AIC® corporation

representative in your district or visit the AIC® website: https://www.aicipc.com/en/index.

It is our greatest honor to provide the best service for our customers.

1

Chapter 1. Product Features FB128-LX User Manual

Spica User Manual Chapter 1. Product Features

Chapter 1� Product Features

FB128-LX is a high density storage server that includes mother board, chassis,

redundant power supplies, HDD backplane, and hotswapple fans. For more information

about our product, please visit our website at https://www.aicipc.com/en/index.

Before removing the subsystem from the shipping carton, visually inspect the physical

condition of the shipping carton. Exterior damage to the shipping carton may indicate

that the contents of the carton are damaged. If any damage is found, do not remove

the components; contact the dealer where the subsystem was purchased for further

instructions. Before continuing, first unpack the subsystem and verify that the number

of components in the shipping carton is accurate and in good condition

1�1 Box Contents

This product contains the components listed below.

Please confirm the number and the condition of the components before

installation.

• System barebone

(includes power supply, fan

& hard disk drive tray)

• Power cord (vary per region)

• 28" Slide rail x 1 set (optional)

2

Chapter 1. Product Features FB128-LX User Manual

1�2 Specifications

NOTE

This product don't support redundant function under 180 voltage AC inlet.

Dimensions

(W x D x H)

mm : 438 x 801.2 x 44

inches : 17.2 x 31.5 x 1.7

Motherboard

AIC Server Board Lynx

Processor

Support

• Intel® Xeon® Scalable Processors

(Skylake/Cascade Lake/Cascade Lake Refresh)

• Intel® Storm Lake 100Gbps Host

Fabric Interface, Skylake-F SKU CPU

• Supports CPU TDP up to 150W

UPI Speeds 10.4 GT/s, 9.6 GT/s

Socket Type Socket P0 (LGA-3647 Socket)

Chipset Support

Intel® Lewisburg C620 series PCH

System Memory

• 6 x memory channels per CPU,

2 x DIMM per channel

• 24 x DIMM slots support:

DDR4 2933/2666/2400 MHz

(feature supports up to DDR4 2933MHz

by next gen. process upgrade)

- up to 384GB RDIMM SRx4

- up to 768GB RDIMM DRx4

- up to 3072GB RDIMM 3DS 8Rx4/QRx4

- up to 1536GB LRDIMM QRx4

- up to 3072GB LRDIMM 3DS 8Rx4//QRx4

• Intel® NVM DIMM (Apache Pass) support

Front Panel

System power on/off, 2 x USB 3.0 Type A

LEDs

Power status, System alert, LAN activity, Drive activity

Drive Bays

External hot swap 36 x EDSFF

Internal 2 x M.2 NGFF M Key(2280, 2242 by additional

bracket) support SATA/PCIe x 2 onboard

Backplane

1 x 36-port EDSFF NVMe SSD backplane, supports Enterprise

and Datacenter 1U short SSD form factor, SFF-TA-1006

Expansion

Slots

PCIe 3.0

• 1 X16 slot (LP)

• 1 x8 slot (LP)

• 2 x OCP Mezzanine cards V2.0

(Please contact AIC Technical Support for

additional information/details about OCP card.)

Riser Card

(included)

RC-PE1U14-TY

1 x8 PCIe slot

RC-PE1U15-TY

1 x16 PCIe slot

System BIOS

BIOS Type

Insyde UEFI BIOS

BIOS Features

• ACPI

• PXE

• WOL

• AC loss recovery

• IPMI 2.0 KCS

interface

• SMBIOS

• Serial console

redirection

• BIOS Boot

• BIOS Recovery

Mode

• SRIOV

• iSCSI

• TPM

• PCIe Hotplug

On-board

Devices

SATA

Intel® Lewisburg PCH on-chip solution

• 10 x SATA 6.0 Gb/s

BMC

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN,

Serial over LAN

• SMASH Support

• HTML5

Network

Controllers

• Two Intel® I210 Ethernet Controller support

dual port GbE RJ45 connectors

• Networking options provided via OCP

Mezzanine extension

• Realtek RTL8201E 10/100Mbps Ethernet

PHY for BMC dedicated management port

Graphics

Aspeed AST2500 Advanced PCIe Graphics &

Remote Management Processor

• PCIe VGA/2D Controller

• 1920x1200@60Hz 32bpp

Rear I/O

LAN

• 2 x GbE RJ45

• 1 x 10/100M RJ45 dedicated to BMC

management

USB

2 x USB 3.0 Type A

VGA

1 x external DB-15 VGA port

Serial Port

1 x micro USB

Power Supply

1600W 1+1 redundant power supply 80+ Platinum

• AC INPUT : 200~240V,50/60Hz,12A

(except China/Taiwan)

• AC INPUT : 200~240V,50/60Hz,10A

(for China/Taiwan)

1200W 1+1 redundant power supply 80+ Platinum (BTO)

• AC INPUT : 100~127V,50/60Hz,10A

• DC OUTPUT : 800W

• AC INPUT : 200~240V,50/60Hz,8A

• DC OUTPUT : 1200W

System Cooling

7 x 40x56mm easy swap fans

System

Management

• Baseboard Management Controller

• Intelligent Platform Interface 2.0 (IPMI 2.0)

• iKVM, Media Redirection, IPMI over LAN, Serial over LAN

• SMASH Support

Environmental

• Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)

• Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)

• Storage operating humidity : 5%~95% non-condensing

Gross Weight

(w/ PSU & Rail)

kgs : 28

lbs : 61.7

Packaging

Dimensions

(W x D x H)

mm : 615 x 1145 x 278

inches : 24.2 x 45 x 10.9

3

Chapter 1. Product Features FB128-LX User Manual

1�3 Feature

FB128-LX is a reliable 1U storage server barebone with 36 hotswap EDSFF drives bays.

This product is designed to accommodate the AIC®-patented serverboard, Lynx, which

supports two Intel® Xeon® Scalable Processors and 24 DDR4 DIMM to offer greater per-

fomance, efficiency, and utility for our customers. Featuring Xeon® Scalable Processor,

which is emphasized for its accelerated speed and maximized I/O expansion, this product

enhances these advantages by integrating flexible IO usage and system expansion into to

provide greater bandwidth and utilization.

In addition to the noteworthy features of the barebone, FB128-LX provides immediate

and efficient management with Onboard Baseboard Management Controller and greater I/

O extension. Featuring IPMI 2.0 and Aspeed AST2500 Advanced PCIe Graphics, the server

board offers support for iKVM, Media Redirection, Smash Support, IPMI over LAN, and Se-

rial over LAN.

• 1U storage server supports 36 EDSFF (Enterprise Datacenter Small Form Factor),

Enterprise and Datacenter 1U short SSD Form Factor to provide a high density, all

NVMe Flash storage array

• Support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Cascade Lake

refresh/Skylake)

• With Intel® C620 series chipset to provide 5+ years product life cycle

• Flexible I/O usage with Max I/O® to support 1 x PCIe Gen3 x16 and 1 x PCIe Gen3 x8

add-on cards through riser

• Supports OCP Mezzanine v2.0 cards

• Onboard Baseboard Management Controller for system management and IPMI control

• 

4

Chapter 1. Product Features FB128-LX User Manual

Front Panel

Item Description Item Description

Power Button LAN Activity LED

Power Status LED System Alert LED

Drive Activity LED 2 x USB 3.0 Type A port

Rear Panel

Item Description

1 1600W 1+1 redundant power supply 80+ Platinum

2 1 x DB-15 VGA port

3 2 x GbE RJ45 port

4 1 x10/100M RJ45 port dedicated to BMC management

5 2 x USB 3.0 Type A port

6 1 x micro USB

7 2 x OCP Mezzaine cards V2.0 slot

8 1 x PCIe(x8) 3.0 slot

9 1 x PCIe(x16) 3.0 slot



 



  



5

Chapter 1. Product Features FB128-LX User Manual

Top View

Item Description

10 7 x 40x56mm easy swap fans



Lynx ServerboardLynx Serverboard

6

Chapter 2. Hardware Setup FB128-LX User Manual

2�1 Central Processing Unit Setup

The serverboard supports dual Xeon scalable processors and Socket P0 (LGA-3647).

2�1�1 Processor Installation

To ensure a safe and easy setup, you need to prepare before installation:

 a T20 Torx screwdriver

 ESD wrist strap/mat and conductive foam pad

 Safe and stable environment

CAUTION

The pins of the processor socket are vulerable and easily susceptible to damage if

fingers or any foreign objects are pressed against them. Please keep the socket pro-

tective cover on when the processor is not installed.

CAUTION

When unpacking a processor, hold the processor only by its edges to avoid touching

the contacts.

Standard Processor Assembly:

A standard processor assembly is comprised of PHM(Processor Heatsink Module)

components and processor socket assembly.

Chapter 2� Hardware Setup

This information is provided for professional technicians only.

Heat sink

Standard

Processor Clip

Standard

Processor

Bolster Plate

Precsessor

Socket

PHM Components

Processor

Socket Assembly

7

Chapter 2. Hardware Setup FB128-LX User Manual

Processor Socket Assembly:

The server board includes two processor sockets (LGA-3647), supports one or two of

the Intel® Xeon® Processor Scalable Family and has a Thermal Design Power (TDP)

of up to 165W on selected models.

PHM (Processor Heatsink Module) Component:

This information is provided for professional technicians only.

Non Frabic

Processor

Non Frabic

Processor Clip

Heat sink

8

Chapter 2. Hardware Setup FB128-LX User Manual

PHM Screw Installation Order:

The PHM sits level with the processor socket assembly. The PHM is NOT installed

properly if it does not sit level with the processor socket assembly. Once the PHM is

seated over the processor socket assembly, the four heat sink torque screws must be

secured in the following order as shown below.

Processor Heat Sink – Top View with Screw Tightening Order

CAUTION

Failure to tighten the heatsink screws in the specified order may cause damage to the

processor socket assembly. Heat sink screws should be tighted to 12 in-lbs torque

according to the ndicated order on the top of the heatsink label.









This information is provided for professional technicians only.

9

Chapter 2. Hardware Setup FB128-LX User Manual

2�2�1 Placement

2�2 System Memory

CPU1

CPU0

CPU1

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

10

Chapter 2. Hardware Setup FB128-LX User Manual

DIMM

Numbers

DIMM Numbers Placement

2 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

4 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_H0 JDIMM_B0

6 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_H0 JDIMM_B0

JDIMM_G0 JDIMM_A0

8 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_H0 JDIMM_B0

JDIMM_G0 JDIMM_A0

JDIMM_L0 JDIMM_F0

CPU0CPU0CPU0CPU0

CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0

CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0

CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

2�2�2 DIMM Population

11

Chapter 2. Hardware Setup FB128-LX User Manual

10 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_H0 JDIMM_B0

JDIMM_G0 JDIMM_A0

JDIMM_K0 JDIMM_E0

JDIMM_L0 JDIMM_F0

12 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_H0 JDIMM_B0

JDIMM_G0 JDIMM_A0

JDIMM_J0 JDIMM_D0

JDIMM_K0 JDIMM_E0

JDIMM_L0 JDIMM_F0

14 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_I1 JDIMM_C1

JDIMM_H0 JDIMM_B0

JDIMM_G0 JDIMM_A0

JDIMM_J0 JDIMM_D0

JDIMM_K0 JDIMM_E0

JDIMM_L0 JDIMM_F0

16 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_I1 JDIMM_C1

JDIMM_H0 JDIMM_B0

JDIMM_H1 JDIMM_B1

JDIMM_G0 JDIMM_A0

JDIMM_J0 JDIMM_D0

JDIMM_K0 JDIMM_E0

JDIMM_L0 JDIMM_F0

18 DIMMs

CPU1 CPU0

JDIMM_I0 JDIMM_C0

JDIMM_I1 JDIMM_C1

JDIMM_H0 JDIMM_B0

JDIMM_H1 JDIMM_B1

JDIMM_G0 JDIMM_A0

JDIMM_G1 JDIMM_A1

JDIMM_J0 JDIMM_D0

JDIMM_K0 JDIMM_E0

JDIMM_L0 JDIMM_F0

CPU0CPU0CPU0CPU0

CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

CPU0CPU0CPU0CPU0CPU1CPU1CPU1CPU1

JDIMMC0

JDIMMC1

JDIMMB0

JDIMMB1

JDIMMA0

JDIMMA1

JDIMMD1

JDIMMD0

JDIMME1

JDIMME0

JDIMMF1

JDIMMF0

JDIMMI0

JDIMMI1

JDIMMH0

JDIMMH1

JDIMMG0

JDIMMG1

JDIMMJ1

JDIMMJ0

JDIMMK1

JDIMMK0

JDIMML1

JDIMML0

Page is loading ...

AIC FB128-LX User manual

AIC FB128-LX User manual

Related papers

Other documents