Avaya HC050 Camera
Quick Setup Guide
Package Content:
Congratulations on purchasing your PTZ
HC050 Camera for the Avaya Scopia
®
XT Series. This brings a high quality
full HD video source to your endpoint,
with HD 1080p 30 frames per second
(fps), including 12x Optical Zoom,
16x Digital zoom (total 192x), and an
optimal horizontal field of view for video
conferencing rooms.
• Avaya HC050 Camera
• 3m USB cable
• HC050 Wall Mount
• AC power adapter
• Remote Control
• Remote control Batteries
Setting Up this Device
1. Use HC050 Camera as
main camera
2. Use HC050 Camera as USB
camera for your Equinox client
Step 1 Step 1
XT5000 Series Codec Unit XT7000 Series Codec Unit
Step 2 Step 2
Step 3 Step 3
Avaya HC050 Camera can be use as first or additional camera on XT4300,
XT5000, and XT7100. Please follow the below instructions to connect and
use HC050 Camera.
Insert the USB connector to its socket at rear of
the camera.
Connect the HC050 Camera to your laptop.
Attach the USB connector to the USB upper
socket at the rear of the XT Series endpoint
(XT4300, XT5000 or XT7100).
Launch the Equinox client and select the
device (Avaya HC050) from the Settings > User
Preferences page of your Equinox Client.
If using HC020 as first camera, you should enable
it as Default Camera in:
Configure > Advanced > I/O connections
> Cameras > General > Default Camera: USB
Under this configuration, HC050 camera can be
controlled using the provided remote control.
© 2018 Avaya Inc. All Rights Reserved.
Avaya and the Avaya logo are trademarks of Avaya Inc. and are registered in the United States and
other countries. All other trademarks identified by ®, TM, or SM are registered marks, trademarks,
and service marks, respectively, of Avaya Inc. 09/18 • 700514526_QSG_HC050_Camera
A01700514526
P/N
Help
CAUTION: the mains
cable is used as a
disconnecting device,
use therefore an easily
accessible outlet
located near the
device for the power
supply connection.
Never remove the
mains plug while the
device is connected.
CAUTION: the mains
cable is used as a
disconnecting device,
use therefore an easily
accessible outlet
located near the
device for the power
supply connection.
Never remove the
mains plug while the
device is connected.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Avaya IX Huddle Camera HC050 User guide
-
Avaya Scopia XT4300 Quick Setup Manual
-
Avaya Scopia XT Executive 240 Quick Setup Manual
-
-
-
-
-
-
-
Avaya XT4000 Series User guide
Other documents
-
RADVision Scopia XT5000 Series Quick Setup Manual
-
-
-
-
PureLink X-TC020-015 User manual
-
-
RADVision SCOPIA XT4000 Series User manual
-
-
Polycom RealPresence Group Series Release Notes
-
Konftel CC200 User guide