Avaya Scopia XT Advanced Quick Setup Manual

Brand: Avaya

Model: Scopia XT Advanced

Type: Quick Setup Manual

Avaya Scopia® XT Advanced

Optional Camera

Quick Setup Guide

Congratulations on purchasing

your Advanced Camera for Avaya

Scopia XT Series. This will add a

1080p30/720p60, 20x Zoom, ceiling

mount, HD video source for your

endpoint. Advanced camera can be

connected as main camera or optional

second camera.

Package Content:

• Avaya Scopia XT Advanced

20x Camera

• Power Supply

• Camera remote control

• Camera user manual

• Camera cables: 10m serial VISCA

cross cable, 5m HDMI to DVI-I

cable, HDMI to DVI adapter

Help

DC IN 12V

VISCA RS - 422

SYSTEM SELECT

IR SELECTIMAGE FLIP

ONOFF

VIDEO OUT IN RS-232C OUT

VISCA

1 2 3

1 2 3 4 5 6 7 8 9

DC IN 12V

VISCA RS - 422

SYSTEM SELECT

IR SELECTIMAGE FLIP

ONOFF

VIDEO OUT IN RS-232C OUT

VISCA

1 2 3

1 2 3 4 5 6 7 8 9

CAUTION: the mains

cable is used as a

disconnecting device,

use therefore an easily

accessible outlet

located near the

device for the power

supply connection.

Never remove the

mains plug while the

device is connected.

VISCA Cable

Main CameraSecond Optional Camera

CAUTION: Make sure all units are

switched off whenever connecting

or disconnecting devices.

Setting Up this Device

Connect the cables as detailed in the diagram overleaf, then follow the steps below to complete the setup of the Avaya

Scopia XT Advanced Camera. For details on how to use the system after setup, see the User Guide and Deployment

Guide for Scopia XT Series.

NOTE: The Avaya Scopia XT Advanced camera cannot be cascaded to an Avaya Scopia XT Premium Camera.

Thus, if used as second camera with XT7000 Series (connected to the second HDMI or to XT Camera Switch) or with

XT5000 Series (connected to DVI or to XT Camera Switch), and Premium Camera is the main camera, XT Advanced

Camera must be controlled with its own remote control, and not from the remote control of Scopia XT endpoint.

Step 1

Connect the HDMI and power + control connectors to

the endpoint back panel.

1. Use Advanced Camera as

main camera

Step 2

Connect the DVI, power, serial control cable

respectively to DVI, power and VISCA in connectors

of the camera.

Step 3

Check that the System Select switch on back

panel of the camera is set to “7”.

Step 4

If the camera is mounted upside down on the ceiling,

set “ON” the image FLIP selector on the back panel.

Step 1

Connect the optional Advanced Camera to the DVI

input of the Codec Unit. If camera will be controlled

using its own remote control, go to step 4.

Step 2

Connect the VISCA control cross cable between the

main Camera and the optional camera.

Step 3

Check that the System Select switch on back panel

of the camera is set to “7”.

Step 4

Connect the power supply of the optional camera

to the mains, then switch on the Codec Unit.

Step 5

Configure the optional camera in the GUI section

“IO connections –> cameras” as explained in the

Administrator guide.

2. Use Advanced Camera as

second optional camera

VISCA Cable

VISCA Control is a standard protocol to control

PTZ Cameras.

You may buy a VISCA cross cable from a third

party or make you own cable if you’re planning

to position the optional camera far away from the

Codec Unit.

The VISCA cross cable is an 8-pin mini-DIN male to

mini-DIN male cable with below Pinout diagram

VISCA - IN

1 One

2 Two

3 Three

4 Four

5 Five

6 Six

7 Seven

8 Eight

SHIELD

VISCA - OUT

2 Two

1 One

5 Five

4 Four

3 Three

6 Six

7 Seven

8 Eight

SHIELD

Camera remote control can be used if VISCA cable

is not connected. When VISCA cable is connected,

the camera is controlled directly from the remote

control of the XT

* If multiple cameras are cascaded using VISCA daisy chain, all must be the same model (all Premium Cameras or all Advanced Cameras).

Cascading different camera models with VISCA daisy chain may yield wrong camera behavior.

copyright laws and international treaty provisions. Avaya Inc. retains all rights not expressly granted.All product and company names herein may be trademarks of

their registered owners. This publication is Avaya Inc. Confidential & Proprietary. Use pursuant to your signed agreement or Avaya policy. No part of this publication

may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Avaya Inc. No representation of warranties for

fitness for any purpose other than what is specifically mentioned in this guide is made either by Avaya Inc. or its agents. Avaya Inc. reserves the right to revise this

publication and make changes without obligation to notify any person of such revisions or changes. Avaya Inc may make improvements or changes in the product(s)

and/or the program(s) described in this documentation at any time. If there is any software on removable media described in this publication, it is furnished under

a license agreement included with the product as a separate document. If you are unable to locate a copy, please contact Avaya Inc and a copy will be provided

to you. Unless otherwise indicated, Avaya registered trademarks are registered in the United States and other territories. All registered trademarks recognized.

For further information contact Avaya or your local distributor or reseller.

Quick Setup Guide for Avaya Scopia® XT Advanced Optional Camera Version 8.3, March, 2015.

http://www.avaya.com

rev. A0262111-02024P/N