RADVision Scopia XT5000 Series Quick Setup Manual

Brand: RADVision

Model: Scopia XT5000 Series

Type: Quick Setup Manual

RADVision Scopia XT5000 Series is a high-quality video conferencing solution that offers a range of features for clear and efficient communication. With its advanced camera and microphone system, the XT5000 Series delivers lifelike video and audio, making it ideal for remote meetings, presentations, and training sessions. The intuitive user interface and remote control make it easy to operate, while the ability to connect multiple devices and share content enhances collaboration.

© 2012 RADVISION Ltd. All intellectual property rights in this publication are owned by RADVISION Ltd. and are protected by United States copyright laws, other applicable copyright laws and international treaty provisions. RADVISION Ltd. retains all rights not expressly granted.

This publication is RADVISION confidential. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by RADVISION Ltd. No representation of warranties for fitness for any purpose other than what

is specifically mentioned in this guide is made either by RADVISION Ltd. or its agents. RADVISION Ltd. reserves the right to revise this publication and make changes without obligation to notify any person of such revisions or changes. RADVISION Ltd. may make improvements or

changes in the product(s) and/or the program(s) described in this documentation at any time. If there is any software on removable media described in this publication, it is furnished under a license agreement included with the product as a separate document. If you are unable to

locate a copy, please contact RADVISION Ltd. and a copy will be provided to you. Unless otherwise indicated, RADVISION registered trademarks are registered in the United States and other territories. All registered trademarks recognized. All right reserved.

For further information contact RADVISION or your local distributor or reseller. http://www.radvision.com

Network Settings

Enter your network settings. 1.

For questions about this

information, consult your system

administrator.

Then select Next.2.

Moving the Camera

On the general screen, navigate 1.

to Control Camera using the

arrow keys and press OK.

Use the arrow keys to move 2.

the camera to the preferred

position.

Repeat the procedure if you 3.

have a second camera installed.

Press Back when done.4.

System Installation and Activation

Connect all cables to the SCOPIA XT5000 Codec Unit (see overleaf). Power supply must be connected after all other connections have been established.1.

Turn on the TV monitors. 2.

Make sure the remote control has batteries installed.3.

Verify that the LED on the front panel of the Codec Unit is turned on.4.

If the codec unit does not turn on automatically, press the 5. button on the remote control.

The graphical menu appears on the monitors.6.

Country and Language of

Interface

System Name field displays the name 1.

of this Codec Unit as displayed in a

video conference, for example:

Hong Kong, • or

9th Floor Conf Rm •

Use the remote control keypad to 2.

type the name.

Select the Country and preferred 3.

Language.

Then select Next.4.

Gatekeeper Settings

Enter your Gatekeeper settings and 1.

your E.164 number.

For questions about this information,

consult your system administrator.

Then select Done.2.

Graphics and Image Setup

If all the sides of the triangles 1 and

2 are visible on your monitor, select

next.

Otherwise, press 1 to adjust the 1.

position of the top left corner.

Use the arrow keys to move the 2.

selected triangle until it is fully visible

on your monitor. Press OK when

done.

Press 2 to adjust the position of the 3.

bottom right corner.

Repeat the procedure using the 4.

arrows.

Press OK and Next when done.5.

Product Registration

Open the envelope that came with the XT5000.1.

Locate the serial number and product key.2.

On a computer, open a browser and navigate to 3.

http://licensing.radvision.com.

Complete the online registration form and enter the serial number and product 4.

key. The web registration form returns a license key.

Write down the license key and keep it in a safe place for future use.5.

CAUTION: Make sure all units are

switched off whenever connecting

or disconnecting devices. SCOPIA XT5000 Quick Setup Guide

Package Content:

SCOPIA XT5000 Codec Unit•

SCOPIA XT Premium Camera•

SCOPIA XT 3-ways Microphone POD•

SCOPIA XT Remote Control Unit•

Base Camera kit: 2.5m triple camera cable, •

including power, VISCA and DVI-D/HDMI

DVI-I to VGA converter•

Cable LAN 4mt•

Cable HDMI M/M, 2.5M•

Power Supply and power cable•

3-ways Microphone POD cable•

Remote Control Batteries•

PN 62111-00010 rev A1

XT5000XT5000

SCOPIA XT5000

Quick Hardware Setup

CAUTION: Make sure all units are

switched off whenever connecting

or disconnecting devices.

Package Content:

Codec Unit

SCOPIA XT Premium Camera

3-ways Microphone POD

Remote Control Unit and Batteries

Codec Unit Camera Cable

HDMI Cable

3-ways Microphone POD cable

Ethernet Cable for LAN, 4m

Power Supply and Power Cable

DVI-I to VGA converter

RADVISION Optional –

Not Included Accessories

DVI to DVI Cable

Audio cable

Optional Premium Camera to be

connected to DVI input

Optional 2nd 3-way microphone POD

Non-RADVISION

HDMI Cable for Mon2

Ethernet Cable for LAN

VGA cable

XT5000

Premium Camera

Make sure to

connect the cable

into the IN connector.

Digital Media Device

OUT

Remote Control

Batteries

Battery model:

CR2025

LITHIUM BATTERY

DC IN 12V IN RS-232C OUT DVI

IR SELECT

1 2 3

SYSTEM

SELECT

Layouts PiP Inputs Help

SelectMemo

Far Near Presets

SCOPIA XT5000

Codec Unit

Please set the system

selector on the back

of the camera to 7.

10 11

Optional Premium Camera

CAUTION: the mains

cable is used as a

disconnecting device,

use therefore an easily

accessible outlet

located near the

device for the power

supply connection.

Never remove the

mains plug while the

device is connected.

RADVision Scopia XT5000 Series Quick Setup Manual

RADVision Scopia XT5000 Series Quick Setup Manual

RADVision Scopia XT5000 Series Quick Setup Manual

Related papers

Other documents